Search Results for "board"

...UCM Kits can be assembled by hand with documentation at https://developers.enapter.com/docs/tutorial/ucm-kit/introduction **Setup** In order to upload firmware to development board over USB, you need to add your user to the `dialout` group. Open a terminal window, run the following command and *reboot* your computer. > `sudo usermod -a -G dialout $USER` Now restart your computer and you're good to go! **Are you having issues?** Contact with us in Discord: https://go.enapter.com/discord **Support our project** Put a ⭐ on Github: https://github.com/Enapter/marketplace

The IoT Leaf is a small ESP32-based device which can be used as highly flexible power supply, as embedded controller or as a combination of both: it consists of a board which can be cut into two pieces resulting in two different devices or which can be used as one. The board can be powered via solar cell or USB and provides a battery charging function and deep-discharge protection for LiPo batteries. Beside the ESP32 the microcontroller part is prepared for a LoRaWAN and a GPS module. Both together provide a powerful hardware which can be used in many different scenarios. ...

The Red Pitaya is a commercial, affordable FPGA board with fast analog inputs and outputs. This makes it useful for quantum optics experiments, in particular as a digital feedback controller for analog systems. Based on the open source software provided by the board manufacturer, PyRPL (Python RedPitaya Lockbox) implements many devices that are needed for optics experiments with the Red Pitaya.

iHome is a fully tested Smart Home Automation system using the Raspberry Pi Zero WiFi SBC and Linux OS and has all the functional features of NEST or ECOBEE smart thermostats with the added benefit of full privacy and security at less than half the price! It incorporates MBLogic with algorithms and Modbus coms for HVAC home control via the ionware modbus compatible ionC1 input/output controller board. The iHome software system comes fully configured as a SD Card image file for Raspberry Pi Zero wifi Plug and Play capability complete with MBLogic, Node-RED and MQTT already fully installed and ready to go. See wiki instructions to burn the SD Card image file, insert into your RPi Zero and Plug and Play. The iHome is an Internet of Things (IOT) demo project for the ionware ionC1 hardware and the software system and is a complete SCADA platform c/w Modbus TCP Servers and Modbus RS485 serial clients for scalable building automation projects. ...

MySensors (https://www.mysensors.org) is an open source hardware and software community focusing on do-it-yourself home automation and Internet of Things which allows creating original and affordable sensors. NodeManager is intended to take care on your behalf of all those common tasks a MySensors node has to accomplish, speeding up the development cycle of your projects an including the following main components: - Sleep manager: allows managing automatically the complexity behind...

The AWS-IoT-Arduino-Yún-SDK allows developers to connect their Arduino Yún compatible Board to AWS IoT. By connecting the device to the AWS IoT, users can securely work with the message broker, rules and the Thing Shadow provided by AWS IoT and with other AWS services like AWS Lambda, Amazon Kinesis, Amazon S3, etc. The AWS-IoT-Arduino-Yún-SDK consists of two parts, which take use of the resources of the two chips on Arduino Yún, one for native Arduino IDE API access and the other for functionality and connections to the AWS IoT built on top of AWS IoT Device SDK for Python. ...