Search Results for "audio gui interface"

TOISWITCH is a general-Purpose multi I/O-Server for ESP8266. Its build as an easy-to-use Web-GUI-based server for a range of smart home devices. Currently it supports the following types of devices -Power plugs and Power strips incl power measurement -Multicolor (RGB/RGBW/RGBWW) LED lamps incl gamma correction -Switches -Dimmers -Motion detectors -Motor controls -Sensors It has an easy-to-use web-interface to control the devices and configure them. ...

...PyRPL implements various digital signal processing (DSP) modules (see features below). It allows to arbitrarily interconnect the available DSP modules and retrieve signal values on timescales below 1 ms. The graphical user interface (GUI) provides a realtime display of the various measurement instruments and allows the easy configuration of DSP signal chains and feedback controllers. At the highest abstraction level, arbitrary feedback sequences can be defined to fulfill tasks as complex as approaching and locking a resonance of a high-finesse Fabry-Perot cavity (tested up to finesse=100,000).

iHome is a fully tested Smart Home Automation system using the Raspberry Pi Zero WiFi SBC and Linux OS and has all the functional features of NEST or ECOBEE smart thermostats with the added benefit of full privacy and security at less than half the price! It incorporates MBLogic with algorithms and Modbus coms for HVAC home control via the ionware modbus compatible ionC1 input/output controller board. The iHome software system comes fully configured as a SD Card image file for...

The C-GM Counter is a low cost (<50$) DIY Hardware & Firmware for building a Connected Geiger-Müller counter device to record beta-gamma radiation levels. The counter is the hardware part of the overall A-GM project aimed for providing a long-term continuous measurement of the radioactivity level. see also A-GM Manager at https://www.instructables.com/id/DIY-Radioactivity-Counter-IoT-and-Eco-system/ ** IMPORTANT ** : From v1.4, Arduino Nano require Optiboot bootloader to work, other...