Search Results for "gimp-program"

Display, log and upload data to the internet from your Oregon Scientific or AcuRite 02032C weather station. The Arduino WxShield also supported. See project web site for FAQs. Use Open Discussion for support requests.

ANNOUNCEMENT Project has moved to a proprietary website! http://www.instruman.it Updated source code available at https://instruman.codeplex.com/ This is an interface used to program and control Voltcraft DPPS-32-15 Power Supply, and to log data from Victor 86C Multimeter. It's an all-in-one solution to use the two instruments at the same time for Scientific, Research and Study purposes. Features avaible are the following: -Victor 86C USB HID connection protocol -86C data reading and logging -COM port selection -Continuous reading of Voltage and Current -Continuous logging of Voltage and Current in a Chart with the option to export data to csv file -Possibility to set logging rate from 50 ms -Turn ON and OFF instrument -Set Voltage and Current -Set a custom voltage loop to play and reiterate -Reiteration possible in three ways: for a fixed time, for a fixed number of cycles and until the STOP button is pressed

This is a middleware program written in Processing that allows projects created in the MIT Scratch language to communicate with an Arduino board.

...Although written for this specific task it is easy to adopt for any experimental task which changes hardware parameters and waits for a specific condition before proceeding. The graphical interface (QT4) includes plotting (matplotlib), instrument configuration/monitoring and a program step creator. The communication with the hardware is independent of the GUI and any number of devices can be selected. To modify the code for any other task only the hardware interface needs to be redefined.

monoPAS is a C# to octave bridge. Octave is a MATLAB sintaxys compatible program. You can execute commands from C# and do graphical representations. This sdk has been developed by the PAS group of the University of Deusto.

coPAS is a C++ to octave bridge. Octave is a MATLAB sintaxys compatible program. You can execute commands from C++ and do graphical representations. This sdk has been developed by the PAS group of the University of Deusto.

dvbsnoop - DVB analyzer / MPEG analyzer program to monitor, analyze, debug, dump or view dvb/mpeg/dsm-cc/mhp stream information (TS, PES, SECTION) (e.g. digital television) send via satellite, cable or terrestrial.