Search Results for "program"

Display, log and upload data to the internet from your Oregon Scientific or AcuRite 02032C weather station. The Arduino WxShield also supported. See project web site for FAQs. Use Open Discussion for support requests.

The libbuspirate is a C library to talk with the bus pirate hardware (http://dangerousprototypes.com/docs/Bus_Pirate) in raw, binary scripting mode. The libbuspirate allows to quickly write a short C program to test interfacing with your favorite hardware. The library has mainly be used to interface through SPI with RF transceivers such as CC2500, MRF24J40, Ethernet controller such as ENC28J60, EEPROMs such as 24C02, 24FC1025, LCD display (PCD8544 / Nokia5110), LED display (HT1632), ... Example source code to talk with this hardware is provided.

ANNOUNCEMENT Project has moved to a proprietary website! http://www.instruman.it Updated source code available at https://instruman.codeplex.com/ This is an interface used to program and control Voltcraft DPPS-32-15 Power Supply, and to log data from Victor 86C Multimeter. It's an all-in-one solution to use the two instruments at the same time for Scientific, Research and Study purposes. Features avaible are the following: -Victor 86C USB HID connection protocol -86C data reading and logging -COM port selection -Continuous reading of Voltage and Current -Continuous logging of Voltage and Current in a Chart with the option to export data to csv file -Possibility to set logging rate from 50 ms -Turn ON and OFF instrument -Set Voltage and Current -Set a custom voltage loop to play and reiterate -Reiteration possible in three ways: for a fixed time, for a fixed number of cycles and until the STOP button is pressed

This is a middleware program written in Processing that allows projects created in the MIT Scratch language to communicate with an Arduino board.

TxEngine is an embedded controller engine designed to allow one to make supervision & control program that fit in embedded systems. Include a modular design with native support for Modbus RTU, timers, threads, linked lists

...Although written for this specific task it is easy to adopt for any experimental task which changes hardware parameters and waits for a specific condition before proceeding. The graphical interface (QT4) includes plotting (matplotlib), instrument configuration/monitoring and a program step creator. The communication with the hardware is independent of the GUI and any number of devices can be selected. To modify the code for any other task only the hardware interface needs to be redefined.

The "JTAG-GDB server" is a program for integrating the ARM-Embedded ICE logic with the GNU-Debugger GDB.

monoPAS is a C# to octave bridge. Octave is a MATLAB sintaxys compatible program. You can execute commands from C# and do graphical representations. This sdk has been developed by the PAS group of the University of Deusto.

coPAS is a C++ to octave bridge. Octave is a MATLAB sintaxys compatible program. You can execute commands from C++ and do graphical representations. This sdk has been developed by the PAS group of the University of Deusto.

dvbsnoop - DVB analyzer / MPEG analyzer program to monitor, analyze, debug, dump or view dvb/mpeg/dsm-cc/mhp stream information (TS, PES, SECTION) (e.g. digital television) send via satellite, cable or terrestrial.

EVILib is a C++ library for controlling the serial interface with Sony color video cameras EVI-D30(31), EVI-D70(P) and EVI-D100(P). The library's C++ source is released under LGPL license. Sample program provided with the library.

The program implements a demo application which demonstrates using C++ stream-compatible sockets developed by Maciej Sobczak http://www.msobczak.com/

Zmeter is an RS232 serial interface program for the RadioShack 22812 (46 range) Digital Multi Meter (DMM). Zmeter captures the DMM display and outputs it in ASCII text to stdout.

Project aim is to translate RS274X files such that it is easy to use the RS274X file content to automaticly program a home made CNC milling machine to mill Printed circuit boards.

A program to read the values from the RS232 interface of the M9803R desktop multimeter and provide them in readable format for use with gnuplot, scripts, etc.