Search Results for "connection"

...Note: Developed with Java17 Follow these steps step by step to apply RxtxConsole, 1. LIST, to obtain all Serial ports currently available on the system. 2. CONNECT, Select a Serial port for connection and place it in the connection pool for use 3. CONNECTED, check that the Serial ports are connected. Sometimes, the Serial ports that you try to connect may have been used by other applications. 4. USE, select a connected serial port for which the command is transmitted only. 5. ...

...With this cheap Arduino-based setup, it is possible to define messages and signals to be logged on the SD card. The measurement can be started and stopped by Bluetooth connection via handy.

...It's an all-in-one solution to use the two instruments at the same time for Scientific, Research and Study purposes. Features avaible are the following: -Victor 86C USB HID connection protocol -86C data reading and logging -COM port selection -Continuous reading of Voltage and Current -Continuous logging of Voltage and Current in a Chart with the option to export data to csv file -Possibility to set logging rate from 50 ms -Turn ON and OFF instrument -Set Voltage and Current -Set a custom voltage loop to play and reiterate -Reiteration possible in three ways: for a fixed time, for a fixed number of cycles and until the STOP button is pressed

JLongTCPConn is a developing toolkit for TCP connection and session. It does the jobs of TCP processing (such as login, session maintainment, active-test or heartbeating, and data buffering), which makes you focus on application layer logics.

A Java toolkit of MATIP (Mapping of Airline Reservation, Ticketing, and Messaging Traffic over IP) within a Connection Framework. This will provide a set of libraries for optimized communication link between an airline and a central computer system over