Search Results for "all to"

# Stellaris QED Engine ### Quantum Vacuum Engineering for Extreme Astrophysical Environments **A fully functional, real-time, closed-loop simulation of magnetar physics** Now with strong-field QED, dark photon conversion, general relativity, and force-free plasma dynamics — all in pure Python.  ## Current Capabilities (v0.5.0 – 100% complete Month-1 target) | Feature | Status | Description | |----------------------------------|------------|-----------| | Realistic 10¹⁵ G magnetar dipole | Done | 10 km neutron star surface field | | Time-dependent FDTD solver | Done | 2.5D TE-mode wave propagation (leapfrog) | | Euler–Heisenberg nonlinear vacuum| Done | Full strong-field QED corrections | | Dark photon → photon conversion | Done | Field-dependent probability & energy loss | | General relativity | Done | Null geodesic ray tracing

...The platform supports Windows/MAC/Linux. Note: Developed with Java17 Follow these steps step by step to apply RxtxConsole, 1. LIST, to obtain all Serial ports currently available on the system. 2. CONNECT, Select a Serial port for connection and place it in the connection pool for use 3. CONNECTED, check that the Serial ports are connected. Sometimes, the Serial ports that you try to connect may have been used by other applications. 4. ...

Display, log and upload data to the internet from your Oregon Scientific or AcuRite 02032C weather station. The Arduino WxShield also supported. See project web site for FAQs. Use Open Discussion for support requests.

QModMaster is a free Qt-based implementation of a ModBus master application. A graphical user interface allows easy communication with ModBus RTU and TCP slaves. QModMaster also includes a bus monitor for examining all traffic on the bus. QModMaster is based on libmodbus <http://www.libmodbus.org/> for modbus communication and on QsLog <https://bitbucket.org/codeimproved/qslog> for logging. Supports both Windows and Linux. For Windows a pre-compiled binary is availiable. It does not require instalation, just unzip and run. You can download the latest stable version from here <https://sourceforge.net/projects/qmodmaster/files/qModMaster-Win32-exe-0.5.2-3.zip/download>. ...

This repository holds all interfaces related to PSR-16. Note that this is not a cache implementation of its own. It is merely an interface that describes a cache implementation. You can find implementations of the specification by looking for packages providing the psr/simple-cache-implementation virtual package. Caching is a common way to improve the performance of any project, making caching libraries one of the most common features of many frameworks and libraries.

...You can install the python module or use the precompiled (for Windows only) stand alone GUI (Qt based) utility (unzip and run). pyModSlave also includes a bus monitor for examining all traffic on the bus. You can also download it from pypi <https://pypi.org/project/pyModSlave/>. pyModSlave is based on modbus-tk <http://code.google.com/p/modbus-tk/>, pySerial <https://github.com/pyserial/pyserial> and pyQt5 <http://www.riverbankcomputing.co.uk>. Check out my modbus master project <http://sourceforge.net/projects/qmodmaster/>. ...

Designed for data-logging applications (weather, hydroponics, greenhouses, aquariums, home automation, power consumpion, solar or wind generators etc.), this solution can be useful also in alarms and burglar. Now you can develop MySQL and web enabled Arduino applications only working on Arduino and PHP. To keep ligth the Arduino Sketch, you can port all not realtime logic to PHP side. At the end your application will works on XQ+Arduino UNO even 24/7 with only 20 Watt AC power, and can be controlled by smartphone via WiFi or from Internet using some free dynamic IP. What more? Enjoy. Sources in github https://github.com/msillano/USBphpTunnel Preconditions: MXQ + Palapa Web server, Arduino UNO Install: - Download USBphpTunnel11_d.apk and the full test_files dir - See file /test_files/readme.txt

Asterix is command line utility and Wireshark plugin used for reading and parsing of Eurocontrol ASTERIX protocol data from stdin, file or network multicast stream. ASTERIX stands for All Purpose STructured Eurocontrol SuRveillance Information EXchange. It is an ATM Surveillance Data Binary Messaging Format which allows transmission of harmonised information between any surveillance and automation system. ASTERIX defines the structure of the data to be exchanged over a communication medium, from the encoding of every bit of information up to the organisation of the data within a block of data - without any loss of information during the whole process. ...

...http://www.instruman.it Updated source code available at https://instruman.codeplex.com/ This is an interface used to program and control Voltcraft DPPS-32-15 Power Supply, and to log data from Victor 86C Multimeter. It's an all-in-one solution to use the two instruments at the same time for Scientific, Research and Study purposes. Features avaible are the following: -Victor 86C USB HID connection protocol -86C data reading and logging -COM port selection -Continuous reading of Voltage and Current -Continuous logging of Voltage and Current in a Chart with the option to export data to csv file -Possibility to set logging rate from 50 ms -Turn ON and OFF instrument -Set Voltage and Current -Set a custom voltage loop to play and reiterate -Reiteration possible in three ways: for a fixed time, for a fixed number of cycles and until the STOP button is pressed

This lightweight dynamic component framework, implemented in Java in a first time uses no code generation at all but uses only contracts. Contracts are expressed using simple software mechanism as interfaces and/or reflection (from middleware to application). A single small jar hosts the code dedicated to data, event and services management over the network, using contracts, reflection and generics. The main goal of the Java Dynamic Component Framework (jdcf) is to simplify the writing (and reuse) of individual Java components, parts of distributed networked application. ...

A prototype input method for OCZ's NIA headset allows full text entry. It is based on Morse Code (3 keystrokes generated from the NIA software) and can produce full English text with all ASCII symbols, uppercase and lowercase.

BITXml is an open xml based protocol for Machine to Machine communications. BITXml is both language and "transport" agnostic and covers all the requirements of a generic M2M telemetry & control application. For more info www.bitxml.org

A Java library supporting automatic RMI wrapping of non-remote objects. All development is accessible by CVS, incl. releases/versions.

A free PHP-based web script to allow remote control of any LED sign using the Alpha protocol (including all Alpha models, Beta-Brite models, and others made by Adaptive Micro Systems).

Thanks to carefully thought out architecture an emulator for all hardware (i386 i860 sparc hppa SGI Mips Alpha etc) on any hardware. A lot of new theories have gone into this trying to fix old problems.

A ZigBee library for ZigBee Series I-II, this library keep a list of end device, their status, IO values, configurations, etc... the idea is keep updated all, all the time.

PROJECT HAS MOVED HERE: https://github.com/Elektordi/x-way-uni-te X-Way and UNI-TE (also used in Unitelway) are communication protocols for old Schneider Electrics PLCs (Programmable Logic Controllers), formerly "Modicon Télémécanique". The aim of this open-source project is to create a Java library to send and receive such data, because there is actually no open-source project at all in this field. Keep in mind that those protocols are old and not maintained anymore by any company, but still used in many old PLCs installations.

Project is migrated to GitHub: https://github.com/OpenDAS OpenDAS is an "Open Data Acquisition System" and a new software aimed at industry use. This is the easiest software to acquire data for industry and logistic, above all, this is a universal software. Why universal?, because OpenDAS has been thought as a universal acquisition system. It can be used to acquire data for any software or any combination of softwares. You can use data that come from an HR system, send data to an ERP system. You can mix data coming from two softwares in order to use them in a unified business procedure Brought to you by ASPerience: http://www.asperience.fr/pole-applicatifs-metiers/saisie-industrielle