Search Results for "serial-studio"

Project was moved to https://github.com/canopennode ---- CANopenNode is an open source software stack used for serial communication of multiple devices over the CAN/CANopen Network. It works on different microcontrollers, is reliable, simple and powerful and is suitable for industrial or home automation. CANopen is the internationally standardized (EN 50325-4) (CiA DS-301) CAN-based higher-layer protocol for embedded control system.

Designed for data-logging applications (weather, hydroponics, greenhouses, aquariums, home automation, power consumpion, solar or wind generators etc.), this solution can be useful also in alarms and burglar. Now you can develop MySQL and web enabled Arduino applications only working on Arduino and PHP. To keep ligth the Arduino Sketch, you can port all not realtime logic to PHP side. At the end your application will works on XQ+Arduino UNO even 24/7 with only 20 Watt AC power, and can...

Serial ports are a classic way for computers and peripheral devices to communicate. Originally modems, printers and laboratory equiptment had serial ports. The serial ports were hardware chips with known addresses. Modern computers and devices often use USB to emulate serial communications. This works well, except the device has a serial address (e.g. ttyUSB0) and a USB address.

sloadhost: command line options driven utilities to target microcontroller serial boot load protocols. First supported target is the STM32 (Cortex M3 core) These run on Linux and Windows

This is a Linux 2.6 driver for ISA, PC-104 and serial Indramat (aka BoschRexroth) CLC cards for SERCOS motion control. http://www.boschrexroth.com/country_units/america/united_states/en/products/brc/ProductDocumentation/LegacyProducts/Controls/index.jsp

Zmeter is an RS232 serial interface program for the RadioShack 22812 (46 range) Digital Multi Meter (DMM). Zmeter captures the DMM display and outputs it in ASCII text to stdout.