Search Results for "operating"

The libbuspirate is a C library to talk with the bus pirate hardware (http://dangerousprototypes.com/docs/Bus_Pirate) in raw, binary scripting mode. The libbuspirate allows to quickly write a short C program to test interfacing with your favorite hardware. The library has mainly be used to interface through SPI with RF transceivers such as CC2500, MRF24J40, Ethernet controller such as ENC28J60, EEPROMs such as 24C02, 24FC1025, LCD display (PCD8544 / Nokia5110), LED display (HT1632), ......

Project was moved to https://github.com/canopennode ---- CANopenNode is an open source software stack used for serial communication of multiple devices over the CAN/CANopen Network. It works on different microcontrollers, is reliable, simple and powerful and is suitable for industrial or home automation. CANopen is the internationally standardized (EN 50325-4) (CiA DS-301) CAN-based higher-layer protocol for embedded control system.

INDI is an instrument neutral distributed interface control protocol that aims to provide backend driver support and automation for a wide range of Astronomical devices (telescopes, focusers, CCDs..etc). Project migrated to Github: https://github.com/indilib/indi

Designed for data-logging applications (weather, hydroponics, greenhouses, aquariums, home automation, power consumpion, solar or wind generators etc.), this solution can be useful also in alarms and burglar. Now you can develop MySQL and web enabled Arduino applications only working on Arduino and PHP. To keep ligth the Arduino Sketch, you can port all not realtime logic to PHP side. At the end your application will works on XQ+Arduino UNO even 24/7 with only 20 Watt AC power, and can...

The ezLINX iCoupler Isolated Interface Development environment provides developers with a cost-effective, plug and play solution for evaluating eight physical Layer, digitally-isolated communication standards(USB, RS-422, RS-485, RS-232, CAN, SPI, I2C and LVDS). The Blackfin ADSP-BF548 processor is used to run the uCLinux operating system and allows for easy customization through the open source hardware and software platform. Development time is significantly reduced for embedded designers and system architects who are designing and evaluating isolated communication standards.The Interfaces on ezLINX use ADI's isolated transceivers with integrated iCoupler and isoPower® digital isolator technology.

Program collects operational data from various devices.

Roundhouse is a pair of C based embedded software applications to drive model railroad stepper motor based turntables. It consists of a stepper motor code and controller code connected by an I2C network. Written in C for PIC18/PIC16s processors.

The "JTAG-GDB server" is a program for integrating the ARM-Embedded ICE logic with the GNU-Debugger GDB.

An universal Lan-to-GPIB adapter for lab instruments using the Egnite Ethernut 2.1; code in AVR C; supports http protocals and able to run cgi scripts; Primary interface is command based; software, firmware, and hardware schematics are all available

ACNexus is a bluetooth sensor device, communicating with various clients such as mobile phones. The software suite consists of: ACNexusBT (Arduino firmware), ACNexusMobile (J2ME Phone App), ACNexusQC (Quartz Composer Plugin), ACNexusX (OS X app)

OPNODE project - xAP home automation controllers with web interface, 1-Wire and X10.

LifoBot is a simple robot built from scratch using a Gumstix embedded system. It is controlled via bluetooth and is able to move exploiting two engines. This is a didactic project designed for people wanting to learn something new.

CanFestival focuses on providing an ANSI-C platform independent CANOpen stack that can be implemented as master or slave nodes on PCs, Real-time IPCs, and Microcontrollers. A WxPython based CanOpen Object Dictionary editor GUI is also provided.

SECU86 is Standard Engine Control Unit x86. The project goal is to develop a standard computer and OS (opensource) that would work on any car. It'll be based on the x86 processor and will try to replace the poor standard ECU that comes with any car.

The LEO-SYSGEN project deals with development of the Sysgen tool for Linux Based ECOS interface for OSEK/VDX Based RTOS. Feel free to download-develop-submit and query about it!!!

PileWorks provides the organizational structure for coordinating several different projects which approach some aspect of Pile Technology. PileWorks defines a set of interfaces and implements some basic infrastructure for Pile engines and agents.

The gpstoolbox project provides a portable Garmin GPS (Global Positioning System) interface library and associated utilities to support creating, transfering, and processing of route, track log, waypoint, and PVT data. Supported platforms include Linux,

Stop press - Alt4 has moved to http://www.swiftcomm.co.uk/alt4

The IPDR.org reference libraries encode and decode IPDR usage documents in either XML or the binary format. Libraries are available in C and Java.

A service-oriented, single-source, Java integration server with virtual Service Stores(TM) that expose services via web services, HTTP and more. Service Flows provide process automation. Mainframe, database, email, web, soap & ftp adapters are included.

Engine computer system scanner for GM OBD-I style automotive computers. Initially to run on PalmOS and later on CE. Scan and tune your vehicle via a PDA.

Jhwctl provides a textgraphical user interface to access the LPT hardware port. [In the making: LPT/COM, FileTransfer, PCSP, VGA font, libSIOS/libTMET]

Thanks to carefully thought out architecture an emulator for all hardware (i386 i860 sparc hppa SGI Mips Alpha etc) on any hardware. A lot of new theories have gone into this trying to fix old problems.