Search Results for "clip-4-win"

The Hamlib project's purpose is to develop flexible and portable shared libraries that offer a standardized API to control any radio oriented equipment through a computer interface.

UrJTAG aims to create an enhanced, modern tool for communicating over JTAG with flash chips, CPUs, and many more. It is a descendant of the popular openwince JTAG tools with a lot of additional features and enhancements.

Driver libraries and applications for the Hirst Magnetic Instruments GM08, GM05 and VGM01 Gaussmeters. Supplied code gives an interface library for Windows and Linux systems. Provices Excel example, labview example, .NET sample and documentation.

Project was moved to https://github.com/canopennode ---- CANopenNode is an open source software stack used for serial communication of multiple devices over the CAN/CANopen Network. It works on different microcontrollers, is reliable, simple and powerful and is suitable for industrial or home automation. CANopen is the internationally standardized (EN 50325-4) (CiA DS-301) CAN-based higher-layer protocol for embedded control system.

A tool for graphical analysis of digital traces recorded by Agilent's Logic Analyzers like HP16700. It is possible to perform higher level bus protocol decoding and parsing with help of "search" tab. These tabs are used to select the Bus Decoder (plugin shared library), configure Bus Decoder parameters and execute higher level analysis. The tool tries to be self descriptive and get as many information as possible from HP16700 for better documenting labor: e.g. test cases, spotted issues and...

Serial ports are a classic way for computers and peripheral devices to communicate. Originally modems, printers and laboratory equiptment had serial ports. The serial ports were hardware chips with known addresses. Modern computers and devices often use USB to emulate serial communications. This works well, except the device has a serial address (e.g. ttyUSB0) and a USB address. tty2usb is a utility that probe system information to display the link between USB and serial addresses.

xfer9860 works with the fx-9860G (AKA Graph85) versions of Casio's graphing calculators. It allows you to transfer files to your calculator, and works on platforms where libusb is available - including Linux and Windows.

News: since 2015 we continue all related developments within Collective Knowledge Framework: http://github.com/ctuning/ck/wiki Simple and universal event-based plugin framework and interface to open up hardwared black-box software (tools, application), make them interactive through external plugins, and connect them with other higher-level tools such as Collective Mind. For example, it is used to open up compilers (GCC, LLVM, Open64) for external tuning of optimization of internal...

Protocols, libraries and applications for commercially available electrical stimulators

TxEngine is an embedded controller engine designed to allow one to make supervision & control program that fit in embedded systems. Include a modular design with native support for Modbus RTU, timers, threads, linked lists

This AS511 driver use functions from the Siemens S5 PLC to modify, observe and watch the PLC software. The functions are running on some CPUs. The functions are only tested on PLC 100U CPU 103. Be careful to use the Software. This software can destroy machines and kill human if you are non careful. Please let me know, if you find a bug.

Program collects operational data from various devices.

MegaTunix is a cross-platform tuning application for some of the available DIY Fuel Injection controllers, including the MegaSquirt (MS1, MS1-Extra, MS2 and MS2-Extra) as well as the LibreEMS EFI system and the JimStim ECU stimulator/development tool.

A userspace USB peripheral driver for the Owon range of digital storage oscilloscopes. Based on the libUSB library it is aimed at Linux but also portable across platforms.

sloadhost: command line options driven utilities to target microcontroller serial boot load protocols. First supported target is the STM32 (Cortex M3 core) These run on Linux and Windows

Roundhouse is a pair of C based embedded software applications to drive model railroad stepper motor based turntables. It consists of a stepper motor code and controller code connected by an I2C network. Written in C for PIC18/PIC16s processors.

xswifs stands for: cross SoftWare Interfaces. This project provide examples (snippets) for interfacing various software tools and languages with various mechanism. It has been created to help in HW/SW co-simulation and to provide benchmarks.

Software application, firmware and U.I. for 4-motors 3-axis milling machine, open hardware, software and mechanics. See also project in details for schematics and images on http://www.contesti.eu/opensource/xyz-dc-motor-controller

Linux library to connect to Powercom Solarking solar inverters (also know as Solpower and Solar Roo inverters in some countries) using RS-232.

Dieses Projekt erweitert und verbessert die Software des "FiFi-Webservers" des OV O28 (http://www.ov-lennestadt.de/projekte/webserver/webserver.htm). Der Fokus liegt auf Amateurfunk-bezogener Nutzung.

The "JTAG-GDB server" is a program for integrating the ARM-Embedded ICE logic with the GNU-Debugger GDB.

An universal Lan-to-GPIB adapter for lab instruments using the Egnite Ethernut 2.1; code in AVR C; supports http protocals and able to run cgi scripts; Primary interface is command based; software, firmware, and hardware schematics are all available

OPNODE project - xAP home automation controllers with web interface, 1-Wire and X10.

USb in Userspace, is a generic usb driver. It try to hide usb work exposing at user space level simple objects like file, where readers contend for data. Support cntl/intr/bulk/isoc endpoint. I, Salvatore Lionetti, am looking4ajob