Search Results for "wxwidgets source code"

...It does not require instalation, just unzip and run. You can download the latest stable version from here <https://sourceforge.net/projects/qmodmaster/files/qModMaster-Win32-exe-0.5.2-3.zip/download>. Source code is availiable for Windows and Linux for compilation using Qt <http://www.qt.io/download>. Check out my modbus slave project <http://sourceforge.net/projects/pymodslave/>. Checkout the following youtube videos : <https://www.youtube.com/channel/UC3Tk2gE-KGtwOq8WWmb2R7g>

Driver libraries and applications for the Hirst Magnetic Instruments GM08, GM05 and VGM01 Gaussmeters. Supplied code gives an interface library for Windows and Linux systems. Provices Excel example, labview example, .NET sample and documentation.

...ASTERIX defines the structure of the data to be exchanged over a communication medium, from the encoding of every bit of information up to the organisation of the data within a block of data - without any loss of information during the whole process. More about ASTERIX protocol you can find here: http://www.eurocontrol.int/services/asterix Source code is available at: https://github.com/CroatiaControlLtd/asterix

ANNOUNCEMENT Project has moved to a proprietary website! http://www.instruman.it Updated source code available at https://instruman.codeplex.com/ This is an interface used to program and control Voltcraft DPPS-32-15 Power Supply, and to log data from Victor 86C Multimeter. It's an all-in-one solution to use the two instruments at the same time for Scientific, Research and Study purposes. Features avaible are the following: -Victor 86C USB HID connection protocol -86C data reading and logging -COM port selection -Continuous reading of Voltage and Current -Continuous logging of Voltage and Current in a Chart with the option to export data to csv file -Possibility to set logging rate from 50 ms -Turn ON and OFF instrument -Set Voltage and Current -Set a custom voltage loop to play and reiterate -Reiteration possible in three ways: for a fixed time, for a fixed number of cycles and until the STOP button is pressed

This project is a simple USB-to-GBIB (IEEE488) interface from PC to GPIB-based devices.

This ASN.1 compiler turns ASN.1 specifications into C code. The asn1c is shipped together with conformant BER/DER/XER/PER codecs. The X.509, GSM TAP3, MEGACO, RRC and LDAP encoding and decoding examples are part of the source code distribution. NOTE: THE asn1c PROJECT HAS LARGELY MOVED TO GITHUB: http://github.com/vlm/asn1c

Software application, firmware and U.I. for 4-motors 3-axis milling machine, open hardware, software and mechanics. See also project in details for schematics and images on http://www.contesti.eu/opensource/xyz-dc-motor-controller

Digital Signal Processing Block Diagram Compiler - user extendable to all DSP's, but presently supports only the TI C2000 family. Rich support for fixed point arithmetic, both saturated and unsaturated. Block diagram entry is via TinyCAD (included).

this is a widget to integrate with QT Designer. You can communicate with the serial port without write any line of code.

ogr2gui is a open source project offering a graphical user interface (gui) for ogr2ogr. ogr2ogr is a command line utility used to convert and manipulate geospatial data.

Java wrapper (JNI) for OpenDmx widget (more info www.enttec.com) Source code: java, c++ / Author: Juanjo Lopez

Development of a USB interface library to different USB enabled development (hardware) platforms. Including, but not limited to, FPGA prototype boards.

coPAS is a C++ to octave bridge. Octave is a MATLAB sintaxys compatible program. You can execute commands from C++ and do graphical representations. This sdk has been developed by the PAS group of the University of Deusto.

This project is an off-shoot of the EGADSS project. The nature of the changes made to the PD CLIPS code means a separate project would be best. This is an FOSS version of the PD CLIPS Engine to include such features as backwards chaining and more....

C++ runtime that provides platform independent distributed state machines thanks to messaging, threads management, timers, traces...

OpenTCA is C/C++-based software for the Linux/BSD platform, intended to allow anyone with a computerized-vehicle to analyze trouble codes without having to pay a mechanic to do it.

OBD poller is essentially a bridge between OBD-II interface and HTTP. ELM327-based devices are supported. The main purpose of it is to be used as a helper to implement various Flash-based gauges, other uses are possible.

A haptics abstraction layer for OGRE. This should allow other developers to write haptic API plugins to be used seamlessly with OGRE without having to re-write any code in the OGRE application.