Search Results for "custom control"

Project was moved to https://github.com/canopennode ---- CANopenNode is an open source software stack used for serial communication of multiple devices over the CAN/CANopen Network. It works on different microcontrollers, is reliable, simple and powerful and is suitable for industrial or home automation. CANopen is the internationally standardized (EN 50325-4) (CiA DS-301) CAN-based higher-layer protocol for embedded control system.

ANNOUNCEMENT Project has moved to a proprietary website! http://www.instruman.it Updated source code available at https://instruman.codeplex.com/ This is an interface used to program and control Voltcraft DPPS-32-15 Power Supply, and to log data from Victor 86C Multimeter. It's an all-in-one solution to use the two instruments at the same time for Scientific, Research and Study purposes. Features avaible are the following: -Victor 86C USB HID connection protocol -86C data reading and logging -COM port selection -Continuous reading of Voltage and Current -Continuous logging of Voltage and Current in a Chart with the option to export data to csv file -Possibility to set logging rate from 50 ms -Turn ON and OFF instrument -Set Voltage and Current -Set a custom voltage loop to play and reiterate -Reiteration possible in three ways: for a fixed time, for a fixed number of cycles and until the STOP button is pressed

Software application, firmware and U.I. for 4-motors 3-axis milling machine, open hardware, software and mechanics. See also project in details for schematics and images on http://www.contesti.eu/opensource/xyz-dc-motor-controller