Open Source Python Home Automation Software - Page 2

An application to control remotely a Quadcopter throught a Raspberry Pi. The goal is to be able to command and view what is in front of the quadcopter with a camera. This is allready working using a python Webserver and streaming video from Raspberry Camera. You can play also without camera support from command line with remote access.

This software is for delivering push notifications to remote devices such as smartphones and tablets from a Raspberry Pi when the Raspberry Pi is connected through its GPIO pins to a device which holds a relay or electronic switch temporarily closed when activated. An example of such as device is a Dakota Alert break beam sensor.

Python framework to automate your home. Plugins for: KNX, 1-Wire and counting...

SonoffLAN is a Home Assistant custom integration for controlling Sonoff devices that still run original eWeLink firmware. It can use LAN control, cloud control, or both at the same time depending on device availability and configuration. The integration avoids the need to flash devices with custom firmware, which makes it practical for users who want Home Assistant control without modifying hardware. It supports single-channel and multi-channel devices, TH and POW sensors, RF Bridge commands, local multicast updates, and cloud WebSocket updates. It can load device names and encryption keys from eWeLink servers and store them locally for future use. SonoffLAN is best suited for smart home users who want deeper Sonoff automation while keeping the official device firmware.

A shortcut program to start 10 installed programs with keyshortcuts

An open source, cross platform program to provide remote-scripting capabilities across arbitrarily far flung networks of computers via high-level interfaces such as text messaging, instant messaging, and email.

【哥哥科技】中兴路由器 × 全屋智能家居平台联动接入：Home Assistant 极客集成、UI增强脚本插件，硬件路由NPU最佳伴侣、无需刷机，支持全系ZTE！统计上下行流量，查看流量占比速率、上下比值，打击P2P偷上行，支持进制转换，支持Mbps/GiB，可统计内网和公网作对比！设备列表平铺化，大屏可视化一点通，你所要的，都在这里，无需频繁切换页面… ZTE HACS Plugin by Brother Tech. Best for hard NPU routers. Tracks Up/Down traffic & ratios. Detects P2P upload theft. LAN/WAN comparison. Flattened UI for central view. ZTE-Stat_Max & GBNPA-Router-Sync 是由 哥哥科技 开发的一套网络数据遥测与多端转发解决方案。 中兴路由器 × 全屋智能家居平台联动接入插件：Home Assistant 极客集成、UI增强，硬路由NPU最佳伴侣、无需刷机，支持全系ZTE！设备列表平铺化，大屏可视化一点通，你所要的，都在这里，无需频繁切换页面… 本自定义集成通过“脚本截留 + Webhook 异步推送”的组合架构，在不破坏官方原有拓扑、不触发中兴路由器“Web 后台单会话互踢”机制的前提下，将路由器底层的高精度流量数据与设备状态无缝接入 Home Assistant。为网络工程人员提供长周期的流量统计与全局态势观测能力。 配合前端脚本猫插件 ZTE-Stat_Max，将浏览器端抓取到的高精度网络流量数据，通过 Webhook 推送到 Home Assistant 中枢进行持久化存储与展示。 无论是全屋大盘的上下行总流量，还是单台设备的实时吞吐状态，都已被解耦并整合至 HA 的标准设备卡片中。无需频繁登录路由器后台，即可在任意移动端或桌面端实时掌控局域网网络状态。 采用被动数据接收架构，HA 不会主动向路由器发起 HTTP 轮询请求，避免对家庭网络管理业务的干扰。

Cpufreppy is a script that allows you to manage the available frequencies by default on each processor, from the lower frequencies to the higher ones, without exceeding the power limit, you can see how many virtual CPUs are available, there are many preset modes, and also weighs only 7Kb.

Testing of the stability and quality of a network connection. This application helps users in testing the quality of a network connection and in sending feedback to the ISP.

iHome is a fully tested Smart Home Automation system using the Raspberry Pi Zero WiFi SBC and Linux OS and has all the functional features of NEST or ECOBEE smart thermostats with the added benefit of full privacy and security at less than half the price! It incorporates MBLogic with algorithms and Modbus coms for HVAC home control via the ionware modbus compatible ionC1 input/output controller board. The iHome software system comes fully configured as a SD Card image file for Raspberry Pi Zero wifi Plug and Play capability complete with MBLogic, Node-RED and MQTT already fully installed and ready to go. See wiki instructions to burn the SD Card image file, insert into your RPi Zero and Plug and Play. The iHome is an Internet of Things (IOT) demo project for the ionware ionC1 hardware and the software system and is a complete SCADA platform c/w Modbus TCP Servers and Modbus RS485 serial clients for scalable building automation projects. See - ionware.io/free-offer/

It is an easy and handy way for home or small offices where nowadays we have many hosts (pcs, routers, smartphones, NAS, media centers, wi-fi intruders, etc) and we want to know what is up and interact with them. This was born as many others from my need to turn on/off a computer in another room or see what is up before going to bed or be alerted by some intrusion in my local net via wi-fi. It needs a lot of improvements and I hope the community can help. New hosts are discovered via /etc/hosts and nmap but can be added manually too.

PLEASE NOTE: myHouse has been a nice starting point but difficult to customize, maintain and evolve. For these and many other reasons, I've completely re-designed- re-architect myHouse also giving it a new name (eGeoffrey). The basic principles are the same, the software is still open source but now is supposed to be way simpler to configure (entirely via the web interface), use, customize and extend. If you want to give it a look, check out https://www.egeoffrey.com. I've also put together a migration utility to help along to way in case you want to move into the new platform without starting from scratch: https://github.com/myhouse-project/myHouse2eGeoffrey myHouse itself will be no longer maintained since the new eGeoffrey offers the same functionalities and many more. Thanks for your support along the way!

A simple curses user interface for tdtool, Best way to install is to add following line to /etc/apt/sources.list deb http://switch.dl.sourceforge.net/project/nctdtool/debian/ stable main It's also possible to download the installation package and install it with dpkg -i, or just download nctdtool.py from the code.

with this little python coding you have a nice possibility to control the Pollin avr net-io board (with original firmware) via command line Interface. So you can use that in scripts, jobs, etc. like you want. it's even simple possible to control one or more avr net-io boards from an SAP ABAP Programm. netio

Provides a python module for working with the Residential Control Systems (RCS) RS-485 controllable thermostats. The project also provides simple python command line utilities utilizing the module for manipulating the thermostat and basic web interface. Visit the SourceForge "Code" page to download a snapshot.

Scripts and programs to make easy expert users life (basically POSIX users)