Search Results for "project-nightwing"
Sort By:
Showing 25 open source projects for "project-nightwing"
View related business solutions-
Our computer monitoring software allows employees, field contractors, and freelancers to manually clock in when they begin working on an assignment. The application will take screenshots randomly or at set intervals, which allows employers to observe the work process. The application only tracks activity when the employee is clocked in. No spying, only transparency.
-
Define and Deliver Comprehensive Cybersecurity Services. Security threats continue to grow, and your clients are most likely at risk. Small- to medium-sized businesses (SMBs) are targeted by 64% of all cyberattacks, and 62% of them admit lacking in-house expertise to deal with security issues. Now technology solution providers (TSPs) are a prime target. Enter ConnectWise Cybersecurity Management (formerly ConnectWise Fortify) — the advanced cybersecurity solution you need to deliver the managed detection and response protection your clients require. Whether you’re talking to prospects or clients, we provide you with the right insights and data to support your cybersecurity conversation. From client-facing reports to technical guidance, we reduce the noise by guiding you through what’s really needed to demonstrate the value of enhanced strategy.
-
1
Arduino core for the ESP32
Arduino core for the ESP32
.... The low-duty cycle is used to minimize the amount of energy that the chip expends. The output of the power amplifier is also adjustable, thus contributing to an optimal trade-off between communication range, data rate and power consumption. The ESP32 series is available as a chip or module. You can use Arduino-ESP32 Online Documentation to get all information about this project. -
2
PX4 Drone Autopilot
PX4 Autopilot Software
PX4 is used in a wide range of use-cases, from consumer drones to industrial applications. It is also the leading research platform for drones and has been successfully applied to underwater vehicles and boats. PX4 provides a standard to deliver drone hardware support and software stack, allowing an ecosystem to build and maintain hardware and software in a scalable way. Drone development is complicated, and how to get started can be daunting and hard to navigate. These tutorials and... -
3
OpenMQTTGateway
MQTT gateway for ESP8266, ESP32, Sonoff RF Bridge or Arduino
OpenMQTTGateway project goal is to concentrate in one firmware different technologies and protocols, decreasing, by the way, the number of physical bridges needed, and hiding the different technologies singularity behind a simple & widespread communication protocol; MQTT. MQTT gateway for ESP8266, ESP32, Sonoff RF Bridge or Arduino with bidirectional 433mhz/315mhz/868mhz, Infrared communications, BLE, Bluetooth, beacons detection, mi flora, mi jia, LYWSD02, LYWSD03MMC, Mi Scale, TPMS, BBQ... -
4
Homebridge Raspberry Pi Image
Homebridge Raspberry Pi Image based on Raspberry Pi OS Lite
This project provides a free Raspbian-based Raspberry Pi image with Homebridge and Homebridge Config UI X pre-installed. This image also provides a command called hb-config which helps you keep Node.js up-to-date, perform maintenance on your Homebridge server, and install additional optional software such as Pi Hole and deCONZ. The Homebridge service is installed using the method described in the Raspberry Pi Installation Guide on the Homebridge project wiki. The easiest way to flash... -
Chat with your business data with Looker. More than just a modern business intelligence platform, you can turn to Looker for self-service or governed BI, build your own custom applications with trusted metrics, or even bring Looker modeling to your existing BI environment.
-
5
homebridge-samsung-tizen
Homebridge plugin for Samsung TV's with Tizen OS
... can also use other methods by checking the Sponsor this project section from the right sidebar. This plugin was designed for Homebridge and will require you to set up a Homebridge server. Homebridge is a lightweight server you can run on your home network that emulates the iOS HomeKit API and allows you to control devices that are incompatible with HomeKit. -
6
Concourse
Concourse is a container-based continuous thing-doer written in Go
Built on the simple mechanics of resources, tasks, and jobs, Concourse presents a general approach to automation that makes it great for CI/CD. Concourse is designed to be expressive, versatile, and safe, remaining intuitive as the complexity of your project grows. A Concourse pipeline is like a distributed, continuous Makefile. Each job has a build plan declaring the job's input resources and what to run with them when they change. Your pipeline is then visualized in the web UI, taking only... -
7
Home Automation Control Center
An application to control DIY home automation products
This Perl/PostgreSQL application enables to control various do-it-yourself home automation products (such as air conditioning units or electric radiators). The code is highly portable for used with other DB (for example MySQL). It may be used as a scheduler with light modifications. User Interface is provided by the Home Automation Control Center UI project (https://sourceforge.net/projects/climcontrolui) -
8
GassistPi
Google Assistant for Single Board Computers
Google Assistant for Single Board Computers. In May of 2017, Google Released it’s AIY Projects kit. Initially not many had access to it, so that is when I started modifying the Google Assistant SDK adding AIY like features to help out the ones left without the kit. Every project requires a name and so I named it GassistPi (“G”oogle “Assist”ant on “Pi”). Fast forwarding to date, the project works not only on Pi boards but on a number of other platforms. It has some interesting custom actions... -
9
iHome by ionware
iHome Smart Home System Platform
... Zero wifi Plug and Play capability complete with MBLogic, Node-RED and MQTT already fully installed and ready to go. See wiki instructions to burn the SD Card image file, insert into your RPi Zero and Plug and Play. The iHome is an Internet of Things (IOT) demo project for the ionware ionC1 hardware and the software system and is a complete SCADA platform c/w Modbus TCP Servers and Modbus RS485 serial clients for scalable building automation projects. See - ionware.io/free-offer/ -
Permanently save time and money across the enterprise every day by giving users exactly the knowledge they need from all document sources with a click—without the hassle of launching and searching through hit lists and documents.
-
10
Wi-Fi Ducky
Upload, save and run keystroke injection payloads with an ESP8266
Upload, save and run keystroke injections remotely with an ESP8266 + ATmega32u4. Using a USB device that act as a keyboard to inject keystrokes is well known these days. The USB Rubber Ducky by Hak5 is THE hacker gadget for this kind of attack. It introduced a simple script language called Ducky Script, which this project uses too. The ESP8266 is a popular Wi-Fi chip used in a lot of projects. Because it's cheap, small, and has its own file system (SPIFFS), it's perfect for enabling an easy... -
11
Open Automation
Building automation (like KNX or OpenHAB) software (like CometVisu).
This project aims to provide software usefull in automation tasks like building automation. Different backends are supported like KNX or OpenHAB. Note: The project has moved to GitHub. Please consult: https://github.com/CometVisu/CometVisu - for the CometVisu https://github.com/OpenAutomationProject - for the different OpenAutomation subprojects -
12
Home Automation Control Center UI
A Web Mobile User Interface for Home Automation Control Center
Web User Interface to Home Automation Control Center project (https://sourceforge.net/projects/climcontrol/) -
13
Yet Another DOMotic System
Open sources domotic software
Yadoms is an open source project. It aims to publish a simple, powerfull, flexible and multiplatforms domotic solution. Project has moved to github. Here is the link to the active page: https://github.com/Yadoms/yadoms -
14
Dream Bathroom
Our project team will build a new master suite bathroom.
Our project team has been contracted to build a new master suite bathroom in a new 4,000 Square ft. home, located in the Mission Hills district of Kansas City, Missouri. The project is titled “Dream bathroom,” which will be 14x14 feet (196 square feet). This exquisite bathroom will provide a ‘true spa experience,’ for the client. The completed bathroom will include a digital temperature control thermostat, a fully loaded two person steam shower, a large jetted soaking tub, heated marble floors... -
15
jmpshcmd - smarthome command tool
java based cmd tool to connect different smarthome plattforms
This project is stopped at the moment because of very interesting parallel activities like openhab... ------------- In the smarthome area different systems and technologies can be found. If you want to use only one user interface for all devices you will not find the "right" tool. But there are different automation plattforms like homematic or openhab and often a scripting feature are available. The main idea behind jmpshcmd is a java based tool with support for missing features (like... -
16
Slimhuis.com Smart Home Thermostat
Smart home thermostat with touch screen and home automation
This project includes both hardware- and software design for a new innovative Home Thermostat. It is based on NXP ARM-M series microcontroller and offers a large touch screen. All software and interfaces are open allowing other users to add custom hardware, such as sensors and actuators for home automation. Also, a network connection is provided (WIFI optional) to allow mobile apps to communicate with the home thermostat to set and read values and/or control the home automation system. -
17
MWCC Is a web interface to remotely control your Mac. It uses a combination of PHP, Shellscript and Applescript to control iTunes, launch applications, monitor folders, show disk usage and much more..
-
18
AutoGreen is a open source project devoted to bringing automated gardens, greenhouses and hydroponic systems to people of interest. Interface between seperate modules is controlled by an independent or computer dependant Arduino board.
-
19
JeeLink for HomeSeer is a project to integrate JeeNodes in HomeSeer. Connect and configure multiple devices to a JeeNode and manage them from HomeSeer.
-
20
*Updated 6-11-2010 * Nova is a remote assistance tool developed in C# .NET 3.5. Using Nova, you can administrate remote computers through a File Explorer, Registry Editor, Process Manager, Live View, and Chat.
-
21
-
22
This project is to develop an instant messaging system that is able to monitor and control home appliances. It is based on Java and Smack library for XMPP. We are changing user interfaces and enhancing usability. We hope to release new version in 10 days
-
23
This project describing how to connect PC to Rego 600 heatpump controller (used in heatpumps IVT, Carrier, Bosch, AutoTherm, ...). This project describe hardware and also software part of interface.
-
24
Home Server Power Manager
Power Management for Linux Home Servers using UDP.
... to decide if the machine shall be suspended. More details can be found in the wiki of the project. -
25
The goal of the whyro project is to develop a modular and adaptable, platform independent solution for processing sensor data and interact with actuators in and around the home.
- Previous
- You're on page 1
- Next