Search Results for "x360ce-controller"

Complete HomeKit integration for UniFi Protect with full support for most features including autoconfiguration, motion detection, and multiple controllers. homebridge-unifi-protect is a Homebridge plugin that provides HomeKit support to the UniFi Protect device ecosystem. UniFi Protect is Ubiquiti's video security platform, with rich camera, doorbell, and NVR controller hardware options for you to choose from, as well as an app which you can use to view, configure and manage your video camera and doorbells. This plugin attempts to bridge a gap in the UniFi Protect ecosystem by providing native HomeKit support on par with what you would expect from a first-party of native HomeKit solution. My north star is to create a plugin that just works with minimal required configuration by you to get up and running. ...

bctl is a C++ state-machine based boiler controller utilizing a 1-Wire bus for sensors and I/O. It implements a multi-loop circulation/distribution controller targeting a dual boiler system for combined wood/fuel based heating. The wood fired boiler system utilizes hot water thermal storage and indirect heating of domestic hot water during firing. It includes provision for dumping excess heat to the distribution system, as well as provision for heat recovery during a cool-down cycle. ...

...It will develop to a full and low-cost smarthome-solution, but for now we started to capture the weather as a basis to calculate the efficiency of the energy-sources. The client-server architecture consists of several clients (ie. the weather-station, a station to measure the power consumption, the charge controller, rgb-controller for the lights, shutter controller, etc.) and the server, which is connected to a remote database and will be visualized/controlled on desktop computers, tablets and/or smartphones. The project is based on the current version of the qt classlibrary (v5.4) and qtcreator as the ide!

iHome is a fully tested Smart Home Automation system using the Raspberry Pi Zero WiFi SBC and Linux OS and has all the functional features of NEST or ECOBEE smart thermostats with the added benefit of full privacy and security at less than half the price! It incorporates MBLogic with algorithms and Modbus coms for HVAC home control via the ionware modbus compatible ionC1 input/output controller board. The iHome software system comes fully configured as a SD Card image file for Raspberry Pi Zero wifi Plug and Play capability complete with MBLogic, Node-RED and MQTT already fully installed and ready to go. See wiki instructions to burn the SD Card image file, insert into your RPi Zero and Plug and Play. The iHome is an Internet of Things (IOT) demo project for the ionware ionC1 hardware and the software system and is a complete SCADA platform c/w Modbus TCP Servers and Modbus RS485 serial clients for scalable building automation projects. ...

GROWbox Supervisor System (GROWSS) is a grow box or grow cabinet environmental controller. GROWSS uses a Raspberry Pi (RPI) & Grove sensors to monitor and control the environment in your grow box or cabinet. Environmental factors such as temperature, humidity, soil moisture, & smoke (from fire) are monitored and displayed on a terminal connected to the RPI & on a mobile app. GROWSS also controls the exhaust fan and grow lights based on the time interval (ie. 12 hours on/12 hours off) & from environmental factors, temp & humidity. ...

AquarioPi is an IR controller that will change the light settings around the clock on multiple lights, and multiple brands of infrared (IR) remote controlled lights. All that's required is a Raspberry Pi, a resistor, an IR LED, and a breadboard or other type of circuit board or connection to the LED and resistor. Visit the AquarioPi Wiki for more information.

AIC (Advanced Irrigation Controller) is a computer based control system that has been initially targeted towards controlling irrigation in small to medium size gardens. As the product matures and features are added it is expected to be a fully functional controller used in large scale implementations, green houses and glass houses. AIC platform's in-dependency means it can run on both Linux or Windows XP onwards .

Whenever a key is pressed on TV Remote Controller, TSOP1738 decodes it 38KHz burst and then micro-controller decodes this signal coming from the remote. And if signal is decoded properly then Address and Command is displayed on the 16x2 LCD of the development board. If there is some problem in the command then 0xFF is displayed which means data not decoded properly and there is some problem.

Altsteon is an alternate Insteon implementation for Vera 2 & 3 home automation controllers. It currently supports the most common Insteon devices available.

...BSAC is developed on the brew-in-a-bag (or brew-in-a-bucket) concept and mainly suitable for this kind of setup. The author has a high-tech, stainless steel version of this setup with pump and valves. Presently the software runs on a Linux controller (ARM based) and with a certain display HW. It is also being ported to a standard Linux PC with standard display. The project contains an abstraction layer to make all sorts of porting to other target platforms easier. The BSAC project includes documentation for at least two complete setups (57L and 210L) with actual pumps, valves, fixtures, brewing pots etc. ...

Immersion Cooker Mk II: A food-oriented, feature-rich water-bath controller for slow cooking sous vide. Cook just about anything to perfection with open source hardware and software.

This project describing how to connect PC to Rego 600 heatpump controller (used in heatpumps IVT, Carrier, Bosch, AutoTherm, ...). This project describe hardware and also software part of interface.