Search Results for "notepad-plus"
Sort By:
Showing 36 open source projects for "notepad-plus"
View related business solutions-
Ship Agents FasterGemini Enterprise Agent Platform lets you rapidly build, scale, govern and optimize production-ready agents grounded in your organization's data. The platform enables developers to build custom or pre-built agents for virtually any use case. New customers get $300 in free credits.
-
Stop Cyber Threats with VM-Series Next-Gen Firewall on AzureGain integrated visibility across all traffic in a single pass. Deploy Palo Alto Networks VM-Series to determine application identity and content while automating security policy updates via rich APIs.
-
1
PX4 Drone Autopilot
PX4 Autopilot Software
PX4 is used in a wide range of use-cases, from consumer drones to industrial applications. It is also the leading research platform for drones and has been successfully applied to underwater vehicles and boats. PX4 provides a standard to deliver drone hardware support and software stack, allowing an ecosystem to build and maintain hardware and software in a scalable way. Drone development is complicated, and how to get started can be daunting and hard to navigate. These tutorials and... -
2
OpenMQTTGateway
MQTT gateway for ESP8266, ESP32, Sonoff RF Bridge or Arduino
OpenMQTTGateway project goal is to concentrate in one firmware different technologies and protocols, decreasing, by the way, the number of physical bridges needed, and hiding the different technologies singularity behind a simple & widespread communication protocol; MQTT. MQTT gateway for ESP8266, ESP32, Sonoff RF Bridge or Arduino with bidirectional 433mhz/315mhz/868mhz, Infrared communications, BLE, Bluetooth, beacons detection, mi flora, mi jia, LYWSD02, LYWSD03MMC, Mi Scale, TPMS, BBQ... -
3
IRremoteESP8266
Infrared remote library for ESP8266/ESP32
Infrared remote library for ESP8266/ESP32. Send and receive infrared signals with multiple protocols. This library enables you to send and receive infra-red signals on an ESP8266 or an ESP32 using the Arduino framework using common 940nm IR LEDs and common IR receiver modules. e.g. TSOP{17,22,24,36,38,44,48} demodulators etc. Usage of the library has been slightly changed in v2.0. You will need to change your usage to work with v2.0 and beyond. You can read more about the changes required on... -
4
bctl
1-wire based boiler/DHW/distribution heating system controller
bctl is a C++ state-machine based boiler controller utilizing a 1-Wire bus for sensors and I/O. It implements a multi-loop circulation/distribution controller targeting a dual boiler system for combined wood/fuel based heating. The wood fired boiler system utilizes hot water thermal storage and indirect heating of domestic hot water during firing. It includes provision for dumping excess heat to the distribution system, as well as provision for heat recovery during a cool-down cycle. The... -
Secure File Transfer for Windows with Cerberus by RedwoodCerberus supports unlimited users and connections on a single IP, with built-in encryption, 2FA, and a browser-based web client — all deployable in under 15 minutes with a 25-day free trial.
-
5
HomePowerControl
Monitor and control your home and several energy sources
The motivation of this project is to monitor and control several energy-sources like wind generators or solar panels. It will develop to a full and low-cost smarthome-solution, but for now we started to capture the weather as a basis to calculate the efficiency of the energy-sources. The client-server architecture consists of several clients (ie. the weather-station, a station to measure the power consumption, the charge controller, rgb-controller for the lights, shutter controller, etc.)... -
6
-
7
GROWbox Supervisor System (GROWSS)
Automated Plant Environment Growing System using Raspberry Pi
GROWbox Supervisor System (GROWSS) is a grow box or grow cabinet environmental controller. GROWSS uses a Raspberry Pi (RPI) & Grove sensors to monitor and control the environment in your grow box or cabinet. Environmental factors such as temperature, humidity, soil moisture, & smoke (from fire) are monitored and displayed on a terminal connected to the RPI & on a mobile app. GROWSS also controls the exhaust fan and grow lights based on the time interval (ie. 12 hours on/12 hours off) &... -
8
lumeter is a Qt-based tool for monitoring speeds of various network interfaces on various machines (with the relevant daemon) in your network. For dealing with remote machines it uses xAPlib. For your own machine with lumeter no external daemon needed.
-
9
Open Automation
Building automation (like KNX or OpenHAB) software (like CometVisu).
This project aims to provide software usefull in automation tasks like building automation. Different backends are supported like KNX or OpenHAB. Note: The project has moved to GitHub. Please consult: https://github.com/CometVisu/CometVisu - for the CometVisu https://github.com/OpenAutomationProject - for the different OpenAutomation subprojects -
$300 Free Credits to Build on Google CloudStart your next project with $300 in free Google Cloud credit. Spin up VMs, run containers, query petabytes in BigQuery, or build agents with Gemini Enterprise Agent Platform. Once your credits are used, keep building with 20+ always-free tier products including Compute Engine, Cloud Storage, GKE, and Cloud Run functions. No commitment required—just sign up and start building.
-
10
Advanced Irrigation Controller
Automated Irrigation Controller for computers
AIC (Advanced Irrigation Controller) is a computer based control system that has been initially targeted towards controlling irrigation in small to medium size gardens. As the product matures and features are added it is expected to be a fully functional controller used in large scale implementations, green houses and glass houses. AIC platform's in-dependency means it can run on both Linux or Windows XP onwards . A large range of serial boards (as well as usb boards that present as... -
11
Launcher Creator
A simple program to create easily launchers of Applications
Un sencillo programa para crear facil y profesionalmente launchers para nuestras aplicaciones y programas en Debian/Ubuntu o cualquier Distribución basada en Debian. SImplemente Ejecuta el programa, ingresa el nombre del lanzador, el comando o programa a ejecutar, el icono del launcher, y las diferentes opciones como agregar al menu, agregar al escritorio, ejecutar como root, y finalmente en crear launcher, y tendrás tu launcher creado facilmente. -
12
Yet Another DOMotic System
Open sources domotic software
Yadoms is an open source project. It aims to publish a simple, powerfull, flexible and multiplatforms domotic solution. Project has moved to github. Here is the link to the active page: https://github.com/Yadoms/yadoms -
13
mpvscada
Another HMI/SCADA set of tools written in C++(Qt) with python bindings
HMI/SCADA software. Support Linux, Windows (cross operation) Source library for writing own control applications with Qt in C++/Python. -
14
K8090
Library for controling Vellman K8090 USB relay card under Linux
This little library will control your Vellman K8090 USB relay card under Linux. The card is delivered with Windows support and a DLL to control it but nothing for Linux systems. Here is the missing part ! Enjoy ;o) -
15
Altsteon
Alternate Insteon implementation for Vera home automation controller
Altsteon is an alternate Insteon implementation for Vera 2 & 3 home automation controllers. It currently supports the most common Insteon devices available. -
16
fslurp
Fronius data tool for Linux
fslurp is a program to pull the data from a Fronius inverter systems via a serial port connection. It supports both single and multiple inverter systems through the Interface Card Easy and the Fronius Interface Card/DataLogger Box. Fronius Sensor Card devices are also supported. It supports both human-readable and delimited (CSV-style) text output. Sample output can be seen by building project and exercising one of the test simulator targets (e.g. simIFCEasy). It is written in... -
17
Menura Voice Control
Voice control system for linux
-
18
SMJ remote controlled sockets
Use your arduino to control remote controlled sockets by SMJ.
Cheap Home Automation. Use an Arduino to control power-sockets in your home. Step 1: Get a pack of "SMJ remote controlled sockets". Step 2: Allocate channels (A-D) and buttons (1-3) to lamps and gizmo's around your home. Step 3: Connect an Arduino to an Aurel Wireless RTX-MID-3V transceiver (see code for mapping). Step 4: Load sketch on your Arduino (v11 is latest). Step 5: Place batch file (Windows). Your com port might not be com3. Step 6: Set up windows task scheduler. Get... -
19
Slimhuis.com Smart Home Thermostat
Smart home thermostat with touch screen and home automation
This project includes both hardware- and software design for a new innovative Home Thermostat. It is based on NXP ARM-M series microcontroller and offers a large touch screen. All software and interfaces are open allowing other users to add custom hardware, such as sensors and actuators for home automation. Also, a network connection is provided (WIFI optional) to allow mobile apps to communicate with the home thermostat to set and read values and/or control the home automation system. -
20
Aurora Monitor
Monitors "Aurora" power inverters
Aurora Monitor is a graphical application which continuously monitors the power output and other information from Power-One Aurora inverters in a domestic photovoltaic power generation system. -
21
RGBLightControl
LED Color Control System for RaspberryPi and Dreambox
This project is about a light controlling system with a 4 RGB-LED channels to run different modes: • autonomously w/o PC performing HSI2RGB transformations and running through the color hues (with dimmable brightness) • remote operated by PC or embedded user software using the provided C++ Software library (based on Boost libraries) • ideal platform for color experiments with your RaspberryPi The system consists of 4 layers: • PCB with Atmel ATmega16 and FT232RL USB interface... -
22
BSAC
Brewing System Automation Controller
BSAC is a brewing system automation and control software that is useful for any hobbyist building an advanced system for him self as well as for small time breweries. BSAC is developed on the brew-in-a-bag (or brew-in-a-bucket) concept and mainly suitable for this kind of setup. The author has a high-tech, stainless steel version of this setup with pump and valves. Presently the software runs on a Linux controller (ARM based) and with a certain display HW. It is also being ported to a... -
23
OPC layer for Mozilla platform. Web-based XUL interface + OPC data. Crossplatform framework for developing OPC servers. Opc UA Binary protocol realization.
-
24
yearfolder
creates a year folder with monthly sub-folders
By default, yearfolder will create a new directory named after the current year. Inside the created directory, 12 directories are made, each named after months of the year. The main use for yearfolder is making several folders named after consecutive years, each with its own monthly subdirectories. -
25
turnMeOn
a wake on LAN/wake on WAN packet generator.
turnMeOn is a QT-based Wake On LAN (WOL) or Wake On WAN (WOW) tool that lets you wake your servers remotely (provided they're WOL enabled).
