Search Results for "c source code"
Sort By:
Showing 38 open source projects for "c source code"
View related business solutions-
Build Agents and Models on One PlatformGemini Enterprise Agent Platform is Google Cloud's comprehensive platform for developers to build, scale, govern, and optimize agents and models. Choose from Google's most advanced models and third-party models like Anthropic's Claude Model Family.
-
$300 Free Credits to Build on Google CloudPut your $300 in credit toward real workloads, then keep building with free monthly usage for 20+ products. No commitment and no charge until you upgrade.
-
1
PX4 Drone Autopilot
PX4 Autopilot Software
PX4 is used in a wide range of use-cases, from consumer drones to industrial applications. It is also the leading research platform for drones and has been successfully applied to underwater vehicles and boats. PX4 provides a standard to deliver drone hardware support and software stack, allowing an ecosystem to build and maintain hardware and software in a scalable way. Drone development is complicated, and how to get started can be daunting and hard to navigate. These tutorials and... -
2
OpenMQTTGateway
MQTT gateway for ESP8266, ESP32, Sonoff RF Bridge or Arduino
OpenMQTTGateway project goal is to concentrate in one firmware different technologies and protocols, decreasing, by the way, the number of physical bridges needed, and hiding the different technologies singularity behind a simple & widespread communication protocol; MQTT. MQTT gateway for ESP8266, ESP32, Sonoff RF Bridge or Arduino with bidirectional 433mhz/315mhz/868mhz, Infrared communications, BLE, Bluetooth, beacons detection, mi flora, mi jia, LYWSD02, LYWSD03MMC, Mi Scale, TPMS, BBQ... -
3
IRremoteESP8266
Infrared remote library for ESP8266/ESP32
Infrared remote library for ESP8266/ESP32. Send and receive infrared signals with multiple protocols. This library enables you to send and receive infra-red signals on an ESP8266 or an ESP32 using the Arduino framework using common 940nm IR LEDs and common IR receiver modules. e.g. TSOP{17,22,24,36,38,44,48} demodulators etc. Usage of the library has been slightly changed in v2.0. You will need to change your usage to work with v2.0 and beyond. You can read more about the changes required on... -
4
T3000_Building_Automation_System
T3000 Bacnet Building Automation System, graphical front end for bldgs
This is our T3000 Building Automation front end, a mature project for managing the air conditioning, lighting, access control and other automation functions of commercial buildings. The application runs on a Windows PC and allows the building operator to manage the building as a complete system. There is a small but growing team of developers working on the application full time. The system works mainly with Temco Controls products but integrators, controls contractors and other... -
MongoDB Atlas runs apps anywhereMongoDB Atlas gives you the freedom to build and run modern applications anywhere—across AWS, Azure, and Google Cloud. With global availability in over 115 regions, Atlas lets you deploy close to your users, meet compliance needs, and scale with confidence across any geography.
-
5
bctl
1-wire based boiler/DHW/distribution heating system controller
...It includes provision for dumping excess heat to the distribution system, as well as provision for heat recovery during a cool-down cycle. The design is based on the 1-wire family of sensors and data I/O components. The software package is written in C++ and utilizes the owcapi and owlib facilities of the open-source owfs package for all 1-wire transactions. The software architecture is based on the QP hierarchical state machine framework developed by Quantum Leaps, and utilizes their QM modeling tool for state machine template generation. QP is an open-source package and QM is distributed free of charge. -
6
-
7
GROWbox Supervisor System (GROWSS)
Automated Plant Environment Growing System using Raspberry Pi
GROWbox Supervisor System (GROWSS) is a grow box or grow cabinet environmental controller. GROWSS uses a Raspberry Pi (RPI) & Grove sensors to monitor and control the environment in your grow box or cabinet. Environmental factors such as temperature, humidity, soil moisture, & smoke (from fire) are monitored and displayed on a terminal connected to the RPI & on a mobile app. GROWSS also controls the exhaust fan and grow lights based on the time interval (ie. 12 hours on/12 hours off) &... -
8
lumeter is a Qt-based tool for monitoring speeds of various network interfaces on various machines (with the relevant daemon) in your network. For dealing with remote machines it uses xAPlib. For your own machine with lumeter no external daemon needed.
-
9
WndLpt
Handy LPT port pins manager (also support COM port via USB)
Handy 1..12 LPT port pins manager. Manual direction by keyboard or mouse. Automatic direction by Script or Music Visualization. Access to LPT-port pins in any Windows 98/Me/2k/XP/Vista/7/8/10. Also support direction up to 32 signals via COM port (see video with Arduino UNO). Can work as VIS plugin for Winamp, WMP and AIMP2/3/4. -
Custom VMs From 1 to 96 vCPUs With 99.95% UptimeLive migration and automatic failover keep workloads online through maintenance. One free e2-micro VM every month.
-
10
Open Automation
Building automation (like KNX or OpenHAB) software (like CometVisu).
This project aims to provide software usefull in automation tasks like building automation. Different backends are supported like KNX or OpenHAB. Note: The project has moved to GitHub. Please consult: https://github.com/CometVisu/CometVisu - for the CometVisu https://github.com/OpenAutomationProject - for the different OpenAutomation subprojects -
11
Advanced Irrigation Controller
Automated Irrigation Controller for computers
AIC (Advanced Irrigation Controller) is a computer based control system that has been initially targeted towards controlling irrigation in small to medium size gardens. As the product matures and features are added it is expected to be a fully functional controller used in large scale implementations, green houses and glass houses. AIC platform's in-dependency means it can run on both Linux or Windows XP onwards . A large range of serial boards (as well as usb boards that present as... -
12
Yet Another DOMotic System
Open sources domotic software
Yadoms is an open source project. It aims to publish a simple, powerfull, flexible and multiplatforms domotic solution. Project has moved to github. Here is the link to the active page: https://github.com/Yadoms/yadoms -
13
mpvscada
Another HMI/SCADA set of tools written in C++(Qt) with python bindings
HMI/SCADA software. Support Linux, Windows (cross operation) Source library for writing own control applications with Qt in C++/Python. -
14
K8090
Library for controling Vellman K8090 USB relay card under Linux
This little library will control your Vellman K8090 USB relay card under Linux. The card is delivered with Windows support and a DLL to control it but nothing for Linux systems. Here is the missing part ! Enjoy ;o) -
15
fslurp
Fronius data tool for Linux
fslurp is a program to pull the data from a Fronius inverter systems via a serial port connection. It supports both single and multiple inverter systems through the Interface Card Easy and the Fronius Interface Card/DataLogger Box. Fronius Sensor Card devices are also supported. It supports both human-readable and delimited (CSV-style) text output. Sample output can be seen by building project and exercising one of the test simulator targets (e.g. simIFCEasy). It is written in... -
16
USB Extension
Software for the placement of removable devices shortcuts.
Software for the placement of removable devices shortcuts on the desktop in Microsoft Windows. Support cd-rom, usb-drives, flash cards, network drives and etc. Work on Windows XP and later. Written on c++. Now the installer (1.0.2) with required DLL-files. -
17
SMJ remote controlled sockets
Use your arduino to control remote controlled sockets by SMJ.
Cheap Home Automation. Use an Arduino to control power-sockets in your home. Step 1: Get a pack of "SMJ remote controlled sockets". Step 2: Allocate channels (A-D) and buttons (1-3) to lamps and gizmo's around your home. Step 3: Connect an Arduino to an Aurel Wireless RTX-MID-3V transceiver (see code for mapping). Step 4: Load sketch on your Arduino (v11 is latest). Step 5: Place batch file (Windows). Your com port might not be com3. Step 6: Set up windows task scheduler. Get... -
18
Slimhuis.com Smart Home Thermostat
Smart home thermostat with touch screen and home automation
This project includes both hardware- and software design for a new innovative Home Thermostat. It is based on NXP ARM-M series microcontroller and offers a large touch screen. All software and interfaces are open allowing other users to add custom hardware, such as sensors and actuators for home automation. Also, a network connection is provided (WIFI optional) to allow mobile apps to communicate with the home thermostat to set and read values and/or control the home automation system. -
19
Aurora Monitor
Monitors "Aurora" power inverters
Aurora Monitor is a graphical application which continuously monitors the power output and other information from Power-One Aurora inverters in a domestic photovoltaic power generation system. -
20
RGBLightControl
LED Color Control System for RaspberryPi and Dreambox
This project is about a light controlling system with a 4 RGB-LED channels to run different modes: • autonomously w/o PC performing HSI2RGB transformations and running through the color hues (with dimmable brightness) • remote operated by PC or embedded user software using the provided C++ Software library (based on Boost libraries) • ideal platform for color experiments with your RaspberryPi The system consists of 4 layers: • PCB with Atmel ATmega16 and FT232RL USB interface... -
21
BSAC
Brewing System Automation Controller
BSAC is a brewing system automation and control software that is useful for any hobbyist building an advanced system for him self as well as for small time breweries. BSAC is developed on the brew-in-a-bag (or brew-in-a-bucket) concept and mainly suitable for this kind of setup. The author has a high-tech, stainless steel version of this setup with pump and valves. Presently the software runs on a Linux controller (ARM based) and with a certain display HW. It is also being ported to a... -
22
OPC layer for Mozilla platform. Web-based XUL interface + OPC data. Crossplatform framework for developing OPC servers. Opc UA Binary protocol realization.
-
23
Arduino WiFly Driver
Arduino libraries
Open-source Arduino driver and example files for WiFly wireless device series. -
24
turnMeOn
a wake on LAN/wake on WAN packet generator.
turnMeOn is a QT-based Wake On LAN (WOL) or Wake On WAN (WOW) tool that lets you wake your servers remotely (provided they're WOL enabled). -
25
ATMEL ATMega1280 based powerful, multifunctional, reliable, expandable and extremely flexible hardware platform for home and industrial processes automation, robotic toys, security systems, education and enjoyment.
