Open Source C++ Home Automation Software
Sort By:
C++ Home Automation Software
View 2028 business solutionsBrowse free open source C++ Home Automation Software and projects below. Use the toggles on the left to filter open source C++ Home Automation Software by OS, license, language, programming language, and project status.
-
Build Agents and Models on One PlatformGemini Enterprise Agent Platform is Google Cloud's comprehensive platform for developers to build, scale, govern, and optimize agents and models. Choose from Google's most advanced models and third-party models like Anthropic's Claude Model Family.
-
$300 Free Credits to Build on Google CloudPut your $300 in credit toward real workloads, then keep building with free monthly usage for 20+ products. No commitment and no charge until you upgrade.
-
1
OpenMQTTGateway
MQTT gateway for ESP8266, ESP32, Sonoff RF Bridge or Arduino
OpenMQTTGateway project goal is to concentrate in one firmware different technologies and protocols, decreasing, by the way, the number of physical bridges needed, and hiding the different technologies singularity behind a simple & widespread communication protocol; MQTT. MQTT gateway for ESP8266, ESP32, Sonoff RF Bridge or Arduino with bidirectional 433mhz/315mhz/868mhz, Infrared communications, BLE, Bluetooth, beacons detection, mi flora, mi jia, LYWSD02, LYWSD03MMC, Mi Scale, TPMS, BBQ thermometer compatibility, SMS & LORA. OpenMQTTGateway supports very mature technologies like basic 433mhz/315mhz protocols & infrared (IR) so you can make your old dumb devices "smart" and avoid throwing them away. These devices also have the advantage of having a lower cost compared to Zwave or more sophisticated protocols. OMG also supports up-to-date technologies like Bluetooth Low Energy (BLE) or LORA. -
2
PX4 Drone Autopilot
PX4 Autopilot Software
PX4 is used in a wide range of use-cases, from consumer drones to industrial applications. It is also the leading research platform for drones and has been successfully applied to underwater vehicles and boats. PX4 provides a standard to deliver drone hardware support and software stack, allowing an ecosystem to build and maintain hardware and software in a scalable way. Drone development is complicated, and how to get started can be daunting and hard to navigate. These tutorials and resources provide a walkthrough of the basics of PX4. PX4 is highly portable, OS-independent and supports Linux, NuttX and MacOS out of the box. The PX4 User Guide explains how to assemble supported vehicles and fly drones with PX4. See the forum and chat if you need help! -
3
IRremoteESP8266
Infrared remote library for ESP8266/ESP32
Infrared remote library for ESP8266/ESP32. Send and receive infrared signals with multiple protocols. This library enables you to send and receive infra-red signals on an ESP8266 or an ESP32 using the Arduino framework using common 940nm IR LEDs and common IR receiver modules. e.g. TSOP{17,22,24,36,38,44,48} demodulators etc. Usage of the library has been slightly changed in v2.0. You will need to change your usage to work with v2.0 and beyond. You can read more about the changes required on our Upgrade to v2.0 page. The library has changed from using constants declared as #define to const with the appropriate naming per the C++ style guide. This may potentially cause old programs to not compile. The most likely externally used #defines have been aliased for limited backward compatibility for projects using the old style. Going forward, only the new constant name style will be supported for new protocol additions. -
4
x10-Home-Automation
This project can read and write x10 signals to the serial port to cont
This project can read and write x10 signals to the serial port to control lights, sounds, phone and media player -
99.99% Uptime for MySQL and PostgreSQL DatabasesCloud SQL Enterprise Plus delivers near-zero downtime with 35 days of point-in-time recovery. Supports MySQL, PostgreSQL, and SQL Server.
-
5
Open Automation
Building automation (like KNX or OpenHAB) software (like CometVisu).
This project aims to provide software usefull in automation tasks like building automation. Different backends are supported like KNX or OpenHAB. Note: The project has moved to GitHub. Please consult: https://github.com/CometVisu/CometVisu - for the CometVisu https://github.com/OpenAutomationProject - for the different OpenAutomation subprojects -
6
WndLpt
Handy LPT port pins manager (also support COM port via USB)
Handy 1..12 LPT port pins manager. Manual direction by keyboard or mouse. Automatic direction by Script or Music Visualization. Access to LPT-port pins in any Windows 98/Me/2k/XP/Vista/7/8/10. Also support direction up to 32 signals via COM port (see video with Arduino UNO). Can work as VIS plugin for Winamp, WMP and AIMP2/3/4. -
7
fslurp
Fronius data tool for Linux
fslurp is a program to pull the data from a Fronius inverter systems via a serial port connection. It supports both single and multiple inverter systems through the Interface Card Easy and the Fronius Interface Card/DataLogger Box. Fronius Sensor Card devices are also supported. It supports both human-readable and delimited (CSV-style) text output. Sample output can be seen by building project and exercising one of the test simulator targets (e.g. simIFCEasy). It is written in C++ and has been compiled on Linux. -
8
Aurora Monitor
Monitors "Aurora" power inverters
Aurora Monitor is a graphical application which continuously monitors the power output and other information from Power-One Aurora inverters in a domestic photovoltaic power generation system. -
9
T3000_Building_Automation_System
T3000 Bacnet Building Automation System, graphical front end for bldgs
This is our T3000 Building Automation front end, a mature project for managing the air conditioning, lighting, access control and other automation functions of commercial buildings. The application runs on a Windows PC and allows the building operator to manage the building as a complete system. There is a small but growing team of developers working on the application full time. The system works mainly with Temco Controls products but integrators, controls contractors and other manufacturers are encouraged to join in to add their own devices and features. Communication to the various systems is over Ethernet, wifi, RS485, RS232. using Bacnet and Modbus protocols. The project is mainly hosted and maintained on github. -
Go from Code to Production URL in SecondsSkip the Kubernetes configs. Cloud Run handles HTTPS, scaling, and infrastructure automatically. Two million requests free per month.
-
10
WOSH is a multi-platform message-oriented middleware written in ANSI C++. Service oriented architecture, designed for network distributed computing. Already working: Audio multimedia, X10, remote control (WinMobile, GTalk) and much more..
-
11
ATMEL ATMega1280 based powerful, multifunctional, reliable, expandable and extremely flexible hardware platform for home and industrial processes automation, robotic toys, security systems, education and enjoyment.
-
12
GROWbox Supervisor System (GROWSS)
Automated Plant Environment Growing System using Raspberry Pi
GROWbox Supervisor System (GROWSS) is a grow box or grow cabinet environmental controller. GROWSS uses a Raspberry Pi (RPI) & Grove sensors to monitor and control the environment in your grow box or cabinet. Environmental factors such as temperature, humidity, soil moisture, & smoke (from fire) are monitored and displayed on a terminal connected to the RPI & on a mobile app. GROWSS also controls the exhaust fan and grow lights based on the time interval (ie. 12 hours on/12 hours off) & from environmental factors, temp & humidity. The environmental values are saved to the local storage every 15 minutes and when an alarm is present. Hi & low values are also saved. The LEDs on the case & the mobile application indicate if there is a high/low temp alarm, hi/low humidity alarm, soil moisture alarm, or smoke alarm. A speaker (buzzer) is activated on the case if there is a smoke alarm. 2 other LEDs indicate if either the exhaust fan is on or if the humidifier is on. -
13
K8090
Library for controling Vellman K8090 USB relay card under Linux
This little library will control your Vellman K8090 USB relay card under Linux. The card is delivered with Windows support and a DLL to control it but nothing for Linux systems. Here is the missing part ! Enjoy ;o) -
14
Launcher Creator
A simple program to create easily launchers of Applications
Un sencillo programa para crear facil y profesionalmente launchers para nuestras aplicaciones y programas en Debian/Ubuntu o cualquier Distribución basada en Debian. SImplemente Ejecuta el programa, ingresa el nombre del lanzador, el comando o programa a ejecutar, el icono del launcher, y las diferentes opciones como agregar al menu, agregar al escritorio, ejecutar como root, y finalmente en crear launcher, y tendrás tu launcher creado facilmente. -
15
libEPOS is a C library to control the EPOS motor control from maxon motor ( http://www.maxonmotor.com ) using a GNU/Linux system. This software is NOT from maxon motor, but was written from scratch by Marcus Hauser and others. The tar file is outdate
-
16
USB Extension
Software for the placement of removable devices shortcuts.
Software for the placement of removable devices shortcuts on the desktop in Microsoft Windows. Support cd-rom, usb-drives, flash cards, network drives and etc. Work on Windows XP and later. Written on c++. Now the installer (1.0.2) with required DLL-files. -
17
Advanced Irrigation Controller
Automated Irrigation Controller for computers
AIC (Advanced Irrigation Controller) is a computer based control system that has been initially targeted towards controlling irrigation in small to medium size gardens. As the product matures and features are added it is expected to be a fully functional controller used in large scale implementations, green houses and glass houses. AIC platform's in-dependency means it can run on both Linux or Windows XP onwards . A large range of serial boards (as well as usb boards that present as serial devices) are able to be controlled. KMTronic's USB and Serial relay boards are selectable in the configuration menu, other boards can be setup by entering their control commands. Although primarily designed for irrigation you can use AIC to control a large variety of hardware, for example lighting, heating etc It is envisaged that future implementations of AIC will incorporate rules for more complex device control. -
18
Altsteon
Alternate Insteon implementation for Vera home automation controller
Altsteon is an alternate Insteon implementation for Vera 2 & 3 home automation controllers. It currently supports the most common Insteon devices available. -
19
OPC layer for Mozilla platform. Web-based XUL interface + OPC data. Crossplatform framework for developing OPC servers. Opc UA Binary protocol realization.
-
20
This application let you to set hostname related with hardware address, which relation is definied in text file or typed manually. It will be useful for people which are installing a lot of workstations and needs automate this.
-
21
Arduino WiFly Driver
Arduino libraries
Open-source Arduino driver and example files for WiFly wireless device series. -
22
BSAC
Brewing System Automation Controller
BSAC is a brewing system automation and control software that is useful for any hobbyist building an advanced system for him self as well as for small time breweries. BSAC is developed on the brew-in-a-bag (or brew-in-a-bucket) concept and mainly suitable for this kind of setup. The author has a high-tech, stainless steel version of this setup with pump and valves. Presently the software runs on a Linux controller (ARM based) and with a certain display HW. It is also being ported to a standard Linux PC with standard display. The project contains an abstraction layer to make all sorts of porting to other target platforms easier. The BSAC project includes documentation for at least two complete setups (57L and 210L) with actual pumps, valves, fixtures, brewing pots etc. BSAC is the brain in the intelli-brew system, see http://intelli-brew.com/ -
23
-
24
Hausbus
Hausbus System (Master / Slave) zur Licht-, Heizungssteuerung und mehr
* Zentrale Steuerung (Master) auf Linux Basis. Lauffähig z.B. auf kostengünstig OpenWrt-Router * Schaltmodul im Hutschienenformat (Eingang, Ausgang) * Displaymodul für Wandmontage * RS485 als physikalischer Layer (19200 Baud), Stern-, Ringstruktur * BUS Protokoll: Aktuell angelehnt an „Open HC“ * 24V DC zur Bus / Schaltmodulversorgung * Master und Simulierte Clients (Busmodule) auch auf Windows lauffähig. Somit sind erste Versuche und Debugging ohne spezielle Hardware möglich. * Konfgurierbar über UML-Diagramme * Webinterface über Socket-Verbindung -
25
This project try to implement a personal alarm system. It can be use to detect intrusions in houses for example.
