Search Results for "tiny-core-plus"
Sort By:
Showing 58 open source projects for "tiny-core-plus"
View related business solutions-
MongoDB Atlas runs apps anywhereMongoDB Atlas gives you the freedom to build and run modern applications anywhere—across AWS, Azure, and Google Cloud. With global availability in over 115 regions, Atlas lets you deploy close to your users, meet compliance needs, and scale with confidence across any geography.
-
$300 Free Credits to Build on Google CloudStart your next project with $300 in free Google Cloud credit. Spin up VMs, run containers, query petabytes in BigQuery, or build agents with Gemini Enterprise Agent Platform. Once your credits are used, keep building with 20+ always-free tier products including Compute Engine, Cloud Storage, GKE, and Cloud Run functions. No commitment required—just sign up and start building.
-
1
Arduino core for the ESP32
Arduino core for the ESP32
ESP32 is a single 2.4 GHz Wi-Fi-and-Bluetooth SoC (System On a Chip) designed by Espressif Systems. ESP32 is designed for mobile, wearable electronics, and Internet-of-Things (IoT) applications. It features all the state-of-the-art characteristics of low-power chips, including fine-grained clock gating, multiple power modes,and dynamic power scaling. For instance, in a low-power IoT sensor hub application scenario, ESP32 is woken-up periodically and only when a specified condition is... -
2
PX4 Drone Autopilot
PX4 Autopilot Software
PX4 is used in a wide range of use-cases, from consumer drones to industrial applications. It is also the leading research platform for drones and has been successfully applied to underwater vehicles and boats. PX4 provides a standard to deliver drone hardware support and software stack, allowing an ecosystem to build and maintain hardware and software in a scalable way. Drone development is complicated, and how to get started can be daunting and hard to navigate. These tutorials and... -
3
OpenMQTTGateway
MQTT gateway for ESP8266, ESP32, Sonoff RF Bridge or Arduino
OpenMQTTGateway project goal is to concentrate in one firmware different technologies and protocols, decreasing, by the way, the number of physical bridges needed, and hiding the different technologies singularity behind a simple & widespread communication protocol; MQTT. MQTT gateway for ESP8266, ESP32, Sonoff RF Bridge or Arduino with bidirectional 433mhz/315mhz/868mhz, Infrared communications, BLE, Bluetooth, beacons detection, mi flora, mi jia, LYWSD02, LYWSD03MMC, Mi Scale, TPMS, BBQ... -
4
ESPectre
Motion detection system based on Wi-Fi spectre analysis (CSI)
ESPectre is an open-source motion detection system that transforms ordinary Wi-Fi signals into an ambient sensor capable of detecting movement without using cameras, microphones, or additional radio hardware, making it a privacy-preserving and cost-effective alternative for presence sensing and smart home automation. At its core, it analyzes Wi-Fi Channel State Information (CSI) — detailed measurements of how Wi-Fi waves change as they propagate — to mathematically detect disturbances caused by human movement between a Wi-Fi router and an ESP32 microcontroller, eliminating the need for machine learning or training data to operate effectively. Designed to integrate natively with Home Assistant through ESPHome, ESPectre exposes motion and movement intensity sensors directly to home automation dashboards, allowing users to trigger automations like lighting, heating, or security alerts when motion is detected. -
Go from Code to Production URL in SecondsSkip the Kubernetes configs. Cloud Run handles HTTPS, scaling, and infrastructure automatically. Two million requests free per month.
-
5
IRremoteESP8266
Infrared remote library for ESP8266/ESP32
Infrared remote library for ESP8266/ESP32. Send and receive infrared signals with multiple protocols. This library enables you to send and receive infra-red signals on an ESP8266 or an ESP32 using the Arduino framework using common 940nm IR LEDs and common IR receiver modules. e.g. TSOP{17,22,24,36,38,44,48} demodulators etc. Usage of the library has been slightly changed in v2.0. You will need to change your usage to work with v2.0 and beyond. You can read more about the changes required on... -
6
C.A.F.E.
The "Third Way" for Home Assistant Automations
...It’s designed to give users the visual clarity of tools like Node-RED without the overhead of a separate execution engine, storing the logic as standard YAML that runs in the core automation engine with zero added resource use. The editor lets users drag and drop nodes to represent triggers, conditions, actions, and variable manipulation, and then compiles those flows into highly readable and native YAML that is fully compatible with Home Assistant. Users can import existing automations to visualize and edit them, and CAFE respects the same underlying data structures so the native automation editor and CAFE can interoperate on the same logic. -
7
langOS
Low power application-configurable Operating System
langOS is an open-source Operating System for Tiny Scale Devices. It supports platforms based on the MSP430 and AVR microcontrollers and is fully written in C. langOS aims to be simple, easy to configure and independent of the development host platform. It should be comfortable on Windows, Linux and MacOS platforms. -
8
T3000_Building_Automation_System
T3000 Bacnet Building Automation System, graphical front end for bldgs
This is our T3000 Building Automation front end, a mature project for managing the air conditioning, lighting, access control and other automation functions of commercial buildings. The application runs on a Windows PC and allows the building operator to manage the building as a complete system. There is a small but growing team of developers working on the application full time. The system works mainly with Temco Controls products but integrators, controls contractors and other... -
9
bctl
1-wire based boiler/DHW/distribution heating system controller
bctl is a C++ state-machine based boiler controller utilizing a 1-Wire bus for sensors and I/O. It implements a multi-loop circulation/distribution controller targeting a dual boiler system for combined wood/fuel based heating. The wood fired boiler system utilizes hot water thermal storage and indirect heating of domestic hot water during firing. It includes provision for dumping excess heat to the distribution system, as well as provision for heat recovery during a cool-down cycle. The... -
Save Up to 91% on Cloud Compute With Spot VMsRun batch jobs at 60-91% off with Spot VMs. Long-running workloads get automatic discounts with sustained use.
-
10
Fritz!Box SmartHome for PRTG
Fritz!Box SmartHome Monitoring with PRTG and AHA-Interface
...So here's a Script to build a "ssh advanced sensor" for PRTG to monitor your SmartHome devices. It's based on PHP using the advanced home automation (AHA) interface of a modern Fritz!Box device. Needs a tiny Linux machine with SSH to host it. It should also be easily adoptable to support Nagios & others. Currently tested with: - FRITZ!DECT 301 Heizkörperthermostat - FRITZ!DECT 440 Taster / Sensor - FRITZ!DECT 200 / 210 Steckdose Comments & suggestions are welcome! -
11
HomePowerControl
Monitor and control your home and several energy sources
The motivation of this project is to monitor and control several energy-sources like wind generators or solar panels. It will develop to a full and low-cost smarthome-solution, but for now we started to capture the weather as a basis to calculate the efficiency of the energy-sources. The client-server architecture consists of several clients (ie. the weather-station, a station to measure the power consumption, the charge controller, rgb-controller for the lights, shutter controller, etc.)... -
12
-
13
GROWbox Supervisor System (GROWSS)
Automated Plant Environment Growing System using Raspberry Pi
GROWbox Supervisor System (GROWSS) is a grow box or grow cabinet environmental controller. GROWSS uses a Raspberry Pi (RPI) & Grove sensors to monitor and control the environment in your grow box or cabinet. Environmental factors such as temperature, humidity, soil moisture, & smoke (from fire) are monitored and displayed on a terminal connected to the RPI & on a mobile app. GROWSS also controls the exhaust fan and grow lights based on the time interval (ie. 12 hours on/12 hours off) &... -
14
lumeter is a Qt-based tool for monitoring speeds of various network interfaces on various machines (with the relevant daemon) in your network. For dealing with remote machines it uses xAPlib. For your own machine with lumeter no external daemon needed.
-
15
Hausbus
Hausbus System (Master / Slave) zur Licht-, Heizungssteuerung und mehr
* Zentrale Steuerung (Master) auf Linux Basis. Lauffähig z.B. auf kostengünstig OpenWrt-Router * Schaltmodul im Hutschienenformat (Eingang, Ausgang) * Displaymodul für Wandmontage * RS485 als physikalischer Layer (19200 Baud), Stern-, Ringstruktur * BUS Protokoll: Aktuell angelehnt an „Open HC“ * 24V DC zur Bus / Schaltmodulversorgung * Master und Simulierte Clients (Busmodule) auch auf Windows lauffähig. Somit sind erste Versuche und Debugging ohne spezielle Hardware möglich. *... -
16
WndLpt
Handy LPT port pins manager (also support COM port via USB)
Handy 1..12 LPT port pins manager. Manual direction by keyboard or mouse. Automatic direction by Script or Music Visualization. Access to LPT-port pins in any Windows 98/Me/2k/XP/Vista/7/8/10. Also support direction up to 32 signals via COM port (see video with Arduino UNO). Can work as VIS plugin for Winamp, WMP and AIMP2/3/4. -
17
Open Automation
Building automation (like KNX or OpenHAB) software (like CometVisu).
This project aims to provide software usefull in automation tasks like building automation. Different backends are supported like KNX or OpenHAB. Note: The project has moved to GitHub. Please consult: https://github.com/CometVisu/CometVisu - for the CometVisu https://github.com/OpenAutomationProject - for the different OpenAutomation subprojects -
18
gnhast
gnhast - Garbled's NetBSD Home Automation Scripting Tools
gnhast - Garbled's NetBSD Home Automation Scripting Tools A collection of daemons that work together to build an event-based home automation system. The core set of daemons is written in C, however, any event (such as a light being turned on) can be handled by an external script or program. These programs can be written in any language, and the central daemon handles all the intercommunication. It is designed to be easily extensible for new device types and protocols. The core system is BSD Licensed (3-clause), however scripts or additional data collectors may be written under any acceptable lic. ... -
19
Advanced Irrigation Controller
Automated Irrigation Controller for computers
AIC (Advanced Irrigation Controller) is a computer based control system that has been initially targeted towards controlling irrigation in small to medium size gardens. As the product matures and features are added it is expected to be a fully functional controller used in large scale implementations, green houses and glass houses. AIC platform's in-dependency means it can run on both Linux or Windows XP onwards . A large range of serial boards (as well as usb boards that present as... -
20
Launcher Creator
A simple program to create easily launchers of Applications
Un sencillo programa para crear facil y profesionalmente launchers para nuestras aplicaciones y programas en Debian/Ubuntu o cualquier Distribución basada en Debian. SImplemente Ejecuta el programa, ingresa el nombre del lanzador, el comando o programa a ejecutar, el icono del launcher, y las diferentes opciones como agregar al menu, agregar al escritorio, ejecutar como root, y finalmente en crear launcher, y tendrás tu launcher creado facilmente. -
21
Yet Another DOMotic System
Open sources domotic software
Yadoms is an open source project. It aims to publish a simple, powerfull, flexible and multiplatforms domotic solution. Project has moved to github. Here is the link to the active page: https://github.com/Yadoms/yadoms -
22
mpvscada
Another HMI/SCADA set of tools written in C++(Qt) with python bindings
HMI/SCADA software. Support Linux, Windows (cross operation) Source library for writing own control applications with Qt in C++/Python. -
23
K8090
Library for controling Vellman K8090 USB relay card under Linux
This little library will control your Vellman K8090 USB relay card under Linux. The card is delivered with Windows support and a DLL to control it but nothing for Linux systems. Here is the missing part ! Enjoy ;o) -
24
Altsteon
Alternate Insteon implementation for Vera home automation controller
Altsteon is an alternate Insteon implementation for Vera 2 & 3 home automation controllers. It currently supports the most common Insteon devices available. -
25
WiRe
The Android-smartphone universal television remote
...Android application will be restricted to a minimum Android Operating Sytem of Android 4.2.2 2. Data communications will be conducted over a Wi-Fi network 3. The embedded device will be built utilizing the Beaglebone Black as its core 4. The Final product will be capable of conducting common television controls
