Search Results for "mx4j-remote"
Sort By:
Showing 43 open source projects for "mx4j-remote"
View related business solutions-
Red Hat Enterprise Linux (RHEL) on Microsoft Azure provides a secure, reliable, and flexible foundation for your cloud infrastructure. Red Hat Enterprise Linux on Microsoft Azure is ideal for enterprises seeking to enhance their cloud environment with seamless integration, consistent performance, and comprehensive support.
-
With the world of work changed forever, it’s essential to manage your workplace and assets together to effectively create a high-performing environment. The Eptura experience combines the power of workplace management software with asset management, enabling you to effectively operate your building and facilitate hybrid work.
-
1
IRremoteESP8266
Infrared remote library for ESP8266/ESP32
Infrared remote library for ESP8266/ESP32. Send and receive infrared signals with multiple protocols. This library enables you to send and receive infra-red signals on an ESP8266 or an ESP32 using the Arduino framework using common 940nm IR LEDs and common IR receiver modules. e.g. TSOP{17,22,24,36,38,44,48} demodulators etc. Usage of the library has been slightly changed in v2.0. You will need to change your usage to work with v2.0 and beyond. You can read more about the changes required... -
2
HomePowerControl
Monitor and control your home and several energy sources
....) and the server, which is connected to a remote database and will be visualized/controlled on desktop computers, tablets and/or smartphones. The project is based on the current version of the qt classlibrary (v5.4) and qtcreator as the ide! -
3
Raspberry Pi Push Notifications
Notifications to phone from Raspberry PI for GPIO connected devices
This software is for delivering push notifications to remote devices such as smartphones and tablets from a Raspberry Pi when the Raspberry Pi is connected through its GPIO pins to a device which holds a relay or electronic switch temporarily closed when activated. An example of such as device is a Dakota Alert break beam sensor. -
4
HomePoint
Espressif ESP32 Based Smarthome screen for MQTT
Espressif ESP32 Based Smarthome screen for MQTT. Control your MQTT/HomeKit Smart Home Devices from an ESP32-powered screen. Homepoint is a screen-based interface for MQTT & HomeKit-connected Smarthome devices that runs on the ESP32 Chipset. See partially switched-on scenes with multiple devices at a glance. Support for temperature, humidity, air quality sensors & Tasmota energy readings. Remote Configuration: Configure and reboot HomePoint through a web interface. No need to reflash. Over... -
Chat with your business data with Looker. More than just a modern business intelligence platform, you can turn to Looker for self-service or governed BI, build your own custom applications with trusted metrics, or even bring Looker modeling to your existing BI environment.
-
5
iHome by ionware
iHome Smart Home System Platform
iHome is a fully tested Smart Home Automation system using the Raspberry Pi Zero WiFi SBC and Linux OS and has all the functional features of NEST or ECOBEE smart thermostats with the added benefit of full privacy and security at less than half the price! It incorporates MBLogic with algorithms and Modbus coms for HVAC home control via the ionware modbus compatible ionC1 input/output controller board. The iHome software system comes fully configured as a SD Card image file for... -
6
WiPointer
Control remotely your PC with a simple touch on your android screen.
WiPointer Server emulates the real mouse and keyboard functions. Similar to the newest smart TV remote control (or Nintendo Wii pad), the WiPointer can be used to control your android TV when watching movies, listening to music, surfing on the Internet, PowerPoint presentations and even more! To enjoy this new way of interaction, you only need to install WiPointer on your phone and WiPointer Server on your android TV or PC. No additional configuration is needed! The connection between... -
7
AquarioPi
Automate the schedule of multiple remote controlled aquarium lights
AquarioPi is an IR controller that will change the light settings around the clock on multiple lights, and multiple brands of infrared (IR) remote controlled lights. All that's required is a Raspberry Pi, a resistor, an IR LED, and a breadboard or other type of circuit board or connection to the LED and resistor. Visit the AquarioPi Wiki for more information. -
8
Sleep#: Save Power. No More Noise!
Send computer to sleep after VLC, WMP, Google Play Movies & TV
*** For the latest v5 with integrated YouTube Web (controllable with the YouTube app on your phone) please download from https://www.microsoft.com/en-gb/p/sleep/9ppgrg6t7dcj *** Do you use your computer for playback of films, streamed TV etc. before going to sleep? In these cases, Windows' sleep functionality is suspended and won't kick in once the video has finished. The solution for many is to use a sleep timer to send the computer to sleep after the estimated amount of time of... -
9
lumeter is a Qt-based tool for monitoring speeds of various network interfaces on various machines (with the relevant daemon) in your network. For dealing with remote machines it uses xAPlib. For your own machine with lumeter no external daemon needed.
-
Virtuous gives you the nonprofit CRM, fundraising, volunteer, and marketing tools you need to create more responsive donor experiences and grow giving.
-
10
Wi-Fi Ducky
Upload, save and run keystroke injection payloads with an ESP8266
... remote connection and holding Ducky Script payloads. Although the ESP8266 is awesome, it doesn't have a native USB, which means it can't act as a keyboard. The ESP will open up a Wi-Fi access point and host a web interface from which you can upload and manage your scripts. When you hit run, it will send the script to the ATmega, which then will execute it on the target machine. -
11
JSTx is used for displaying overlay graphics and text on top of a Philips television, changing channels, receiving remote control keys and changing television display modes. It is a command line utility to execute jointSPACE commands on a device that supports the jointSPACE protocol for Philips televisions (see http://jointspace.sourceforge.net for details on jointSPACE, which is based on DirectFB). It is used in various home automation/internet-of-things projects. There are three versions...
-
12
Extended NEC Protocol Library
Decoding Extended NEC Protocol using PIC18F4550 and TSOP1738
Whenever a key is pressed on TV Remote Controller, TSOP1738 decodes it 38KHz burst and then micro-controller decodes this signal coming from the remote. And if signal is decoded properly then Address and Command is displayed on the 16x2 LCD of the development board. If there is some problem in the command then 0xFF is displayed which means data not decoded properly and there is some problem. TSOP1738 is connected to RB0 pin and my board has 8-LED's connected to PORTB of micro-controller, so i... -
13
hued
Daemon for managing Philips Hue light bulbs
The Philips Hue light bulbs are remote-controllable LED lightbulbs. The control interface allows you to turn the lamps on or off, dim them, or change their color. This application lets you set up schedules to automatically turn lights on or off, based on specific days, times, or relative to sunrise/sunset at your location. Special schedules can be created, e.g. to turn lights on and off while you are travelling. The bulbs ship with iPhone and Android apps for managing them, but the app... -
14
Dream Bathroom
Our project team will build a new master suite bathroom.
..., a double vanity, a remote skylight, fireplace and have a flat screen TV mounted into the wall. -
15
Quadcontrol
Quadcopter Remote Control by RaspberryPi
An application to control remotely a Quadcopter throught a Raspberry Pi. The goal is to be able to command and view what is in front of the quadcopter with a camera. This is allready working using a python Webserver and streaming video from Raspberry Camera. You can play also without camera support from command line with remote access. -
16
mpvscada
Another HMI/SCADA set of tools written in C++(Qt) with python bindings
HMI/SCADA software. Support Linux, Windows (cross operation) Source library for writing own control applications with Qt in C++/Python. -
17
pimuchad
Home automation integrated multi controllers daemon
C version of PimucHA for OpenWRT PimucHA : Python integrated multi controllers Home Automation For CM11A, CM15A(CM15Pro), RFXcomRX, RFXtrx433, TellStick Duo, ATI Remote X10 receiver. Next version at https://github.com/domovilam/pimuchad -
18
This project created for research on Samsung TV Firmware Hacking
-
19
Step-by-step instructions for making your HVAC (Heating, Ventilation & Air Conditioning) system state-of-art. Covers airflow balancing, temperature control & zoning, energy conservation measures, remote access, 1-wire, XBee devices, home automation
-
20
WiRe
The Android-smartphone universal television remote
The WiRe project seeks to provide android smartphones with universal Infrared (IR) television remote control functionality. The limitations/scope of this project include: 1. Android application will be restricted to a minimum Android Operating Sytem of Android 4.2.2 2. Data communications will be conducted over a Wi-Fi network 3. The embedded device will be built utilizing the Beaglebone Black as its core 4. The Final product will be capable of conducting common television... -
21
SiriProxy on Raspberry Pi
Raspberry Pi SD Image with Ruby and SiriProxy
This is an SD card image with RVM, Ruby, and SiriProxy pre-installed. Release notices: https://sourceforge.net/p/siriproxyrpi/news/ Instructions: https://sourceforge.net/p/siriproxyrpi/wiki/Home/ -
22
SMJ remote controlled sockets
Use your arduino to control remote controlled sockets by SMJ.
Cheap Home Automation. Use an Arduino to control power-sockets in your home. Step 1: Get a pack of "SMJ remote controlled sockets". Step 2: Allocate channels (A-D) and buttons (1-3) to lamps and gizmo's around your home. Step 3: Connect an Arduino to an Aurel Wireless RTX-MID-3V transceiver (see code for mapping). Step 4: Load sketch on your Arduino (v11 is latest). Step 5: Place batch file (Windows). Your com port might not be com3. Step 6: Set up windows task scheduler. Get fancy... -
23
RGBLightControl
LED Color Control System for RaspberryPi and Dreambox
This project is about a light controlling system with a 4 RGB-LED channels to run different modes: • autonomously w/o PC performing HSI2RGB transformations and running through the color hues (with dimmable brightness) • remote operated by PC or embedded user software using the provided C++ Software library (based on Boost libraries) • ideal platform for color experiments with your RaspberryPi The system consists of 4 layers: • PCB with Atmel ATmega16 and FT232RL USB interface... -
24
HDMI-CEC Tray
Use your TV remote to control Windows applications
HDMI-CEC Tray allows to control any Windows application using your current TV remote. (*) http://sites.google.com/site/chir21/home/CEC-Tray (*) Requires the Pulse-Eight USB-CEC adapter. Check if your HDTV supports HDMI-CEC. No more hassle with dedicated mediacenter remote controls and special infrared or Bluetooth receivers for your HTPC. Instead, HDMI-CEC Tray makes use of your HDTV's built-in CEC technology to control your PC. You will be able to control Mediacenter, VLC, MPC... -
25
Low-cost, easy to replicate GSM-based remote controlled security system capable of taking and sending pictures of a guarded site.