Search Results for "i-conized"
Sort By:
Showing 28 open source projects for "i-conized"
View related business solutions-
Don’t let unpaid invoices limit your business’s growth. EBizCharge plugs directly into the tools your business already uses to speed up payment collection.
-
Whether natural disaster, cyberattack, or plain-old human error, data can disappear in the blink of an eye. ConnectWise BCDR (formerly Recover) delivers reliable and secure backup and disaster recovery backed by powerful automation and a 24/7 NOC to get your clients back to work in minutes, not days.
-
1
bctl
1-wire based boiler/DHW/distribution heating system controller
bctl is a C++ state-machine based boiler controller utilizing a 1-Wire bus for sensors and I/O. It implements a multi-loop circulation/distribution controller targeting a dual boiler system for combined wood/fuel based heating. The wood fired boiler system utilizes hot water thermal storage and indirect heating of domestic hot water during firing. It includes provision for dumping excess heat to the distribution system, as well as provision for heat recovery during a cool-down cycle... -
2
TOISWITCH
TOISWITCH is a general-Purpose smart-home server for ESP8266
TOISWITCH is a general-Purpose multi I/O-Server for ESP8266. Its build as an easy-to-use Web-GUI-based server for a range of smart home devices. Currently it supports the following types of devices -Power plugs and Power strips incl power measurement -Multicolor (RGB/RGBW/RGBWW) LED lamps incl gamma correction -Switches -Dimmers -Motion detectors -Motor controls -Sensors It has an easy-to-use web-interface to control the devices and configure them. It supports powerful profiles... -
3
UHDLumen
OS X program made in AppleScript that sets your brightness to the max
...) You'll find this in a folder in the files section. If you're on a PPC computer then you'll want to install UHDLumen (legacy-fallback) and right click on the file and click "Get Info". Once you get to the window. Click "Open in 32-bit mode". I do not own a PPC computer so i cannot verify if this works. If you do use a PPC computer and this method worked. Please message me. I'd appreciate it. UHDLumen takes up 103..........wait for it..........KILOBYTES of storage SHOCKER!!! -
4
GassistPi
Google Assistant for Single Board Computers
Google Assistant for Single Board Computers. In May of 2017, Google Released it’s AIY Projects kit. Initially not many had access to it, so that is when I started modifying the Google Assistant SDK adding AIY like features to help out the ones left without the kit. Every project requires a name and so I named it GassistPi (“G”oogle “Assist”ant on “Pi”). Fast forwarding to date, the project works not only on Pi boards but on a number of other platforms. It has some interesting custom actions... -
As your users rely more and more on Cloud and Internet-based technologies, reliable internet connectivity becomes more and more important to your business. With Bigleaf’s proven SD-WAN architecture, groundbreaking AI, and DDoS attack mitigation, you can finally deliver the reliable internet connectivity your business needs without the limitations of traditional networking platforms. Bigleaf’s Cloud Access Network and plug-and-play router allow for limitless control to and from anywhere your traffic needs to go. Bigleaf’s self-driving AI automatically identifies and adapts to any changing circuit conditions and traffic needs—addressing issues before they impact your users. Bigleaf puts you in the driver’s seat of every complaint and support call with full-path traffic and network performance data, delivered as actionable insights, reports, and alerts.
-
5
TOISWITCH_OLD
A WLAN controlled home-automation switch
Hi, this small project is a Wlan controlled home automation switch featuring -Webserver including authentication -Multiple I/O-ports -Controlling via Web-Interface, MQTT or GET-Requests -Timer -Complex time plans -MQTT including MQTTs and authentication -Easy configuration -
6
AutoMine AutoRun
Create or record and edit missing keybindings, automate, be handsfree!
... project to add missing auto walk / auto click function to the game "7 Days to Die", but should work for any purpose. I would love to get feedback on your experience! Advanced functions, like: set target and record mouse movement, aren't working as intended yet. With feedback I will get a sense of the need to update. So please leave your feedback, here, or on discord: https://discord.gg/dyNyqrQqjp Remains free of charge, no scaryware, no adverts. -
7
GROWbox Supervisor System (GROWSS)
Automated Plant Environment Growing System using Raspberry Pi
GROWbox Supervisor System (GROWSS) is a grow box or grow cabinet environmental controller. GROWSS uses a Raspberry Pi (RPI) & Grove sensors to monitor and control the environment in your grow box or cabinet. Environmental factors such as temperature, humidity, soil moisture, & smoke (from fire) are monitored and displayed on a terminal connected to the RPI & on a mobile app. GROWSS also controls the exhaust fan and grow lights based on the time interval (ie. 12 hours on/12 hours off) &... -
8
PyIpChanger
Windows portable GUI program to store/manage IP settings.
I use this program in my daily work as PLC programmer. It is Windows portable version written in PyQT. IP addresses can be easily stored with names. By green button, settings are applied to network adapter selected from the dropdown list. Clicking DHCP is set to the network adapter in DHCP mode. After some time I decided to share it with you. Enjoy. -
9
Broadlink Manager
Broadlink Manager is a very simple way to work with broadlink rm
Broadlink Manager is a very simple way to work with broadlink rm products. when i just started working with Broadlink via Home Assistant i found out that teching the system a new code was not that simple and user friendly. so after searching the internet i found this little project written in c# that did wat i want, very easy way to work with broadlink. but, my device type was new model and unsupported so i extended the support for all new models and added a feature wich allows me to add new... -
Our robust pre-built connectors and our no-code, drag-and-drop interface makes it easy and fast to automatically sync vendors, invoices, and invoice payment data between Tipalti and your ERP or accounting software.
-
10
PiHass
Pre-defined and easy to use Home-Assistant Image for raspberry pi
This is a Raspbain Strech base image with Home-Assistant on it. i used Virtual Env based installation and added some Custom Ui and Custom Components. i have also configured MySQL server and database and also some scripts, sensors and groups to help users start working with the system. -
11
Circonium
C# custom control for round gauge creating and tuning.
...://www.youtube.com/watch?v=ll-CIfFIoOQ In the video there was a case with a mistake SharpDevelop which made breakdown of thedesigner of the MainForm. I cured it. -
12
Jarvis Home Automation
Home automation with wake word detection and SMS commands.
Jarvis is a Home Assistant (https://home-assistant.io/) implementation with wake word detection, SMS commands, and a lot of automation control. While the Conversation component does it's job, it's currently a bit limited and without wake word detection it was almost useless to me. I also have tried the AlexaPi implementation as well as using Amazon Alexa products. However, creating custom intents was not as straight forward as I would have liked for quick and easy creation. Between wake word... -
13
Extended NEC Protocol Library
Decoding Extended NEC Protocol using PIC18F4550 and TSOP1738
Whenever a key is pressed on TV Remote Controller, TSOP1738 decodes it 38KHz burst and then micro-controller decodes this signal coming from the remote. And if signal is decoded properly then Address and Command is displayed on the 16x2 LCD of the development board. If there is some problem in the command then 0xFF is displayed which means data not decoded properly and there is some problem. TSOP1738 is connected to RB0 pin and my board has 8-LED's connected to PORTB of micro-controller, so i... -
14
FumenBot
A DIY gadget to automatize specific plant growing
... to control relays through parallel port. Ending this description, I would like to clarify, I do FumenBot with learning purpose only.- -
15
XBMC Media Move
XBMC Media Move: Media file automated dispatcher for XBMC Media Center
XBMC Media Move is a powerful tool designed to fill the gap between softwares like µTorrent and XBMC Media Center (Kodi) by dispatching media files (video/music/photo/etc...) automatically upon arrival. Please note that even if this software could be used in a context of illegal multimedia consumption, I do not encourage to do so! Note: XBMC Media Move is provided with already pre-configured settings; so it can be installed and used right away (following a standard use) or manually adjusted... -
16
KFUpgrade
Dependencies: Oracle Java / OpenJDK and Xterm
This app is a simple GUI that help You to upgrade Fedora Linux to a newer version via FedUp which replaced older PreUpgrade mechanism. At this moment, there is no official GUI for FedUp from Red Hat/Fedora Team so I decided to write my own. Main purpose is to help promoting Fedora Linux on home desktops and simplify upgrade process. KFUpgrade is not an official GUI for Fedora FedUp and it's not connected with Fedora Project or Red Hat. More about Fedora: http://fedoraproject.org/ -
17
indicator-hosts-up
Panel Indicator to interact and monitor hosts
It is an easy and handy way for home or small offices where nowadays we have many hosts (pcs, routers, smartphones, NAS, media centers, wi-fi intruders, etc) and we want to know what is up and interact with them. This was born as many others from my need to turn on/off a computer in another room or see what is up before going to bed or be alerted by some intrusion in my local net via wi-fi. It needs a lot of improvements and I hope the community can help. New hosts are discovered via /etc/hosts... -
18
RGBLightControl
LED Color Control System for RaspberryPi and Dreambox
This project is about a light controlling system with a 4 RGB-LED channels to run different modes: • autonomously w/o PC performing HSI2RGB transformations and running through the color hues (with dimmable brightness) • remote operated by PC or embedded user software using the provided C++ Software library (based on Boost libraries) • ideal platform for color experiments with your RaspberryPi The system consists of 4 layers: • PCB with Atmel ATmega16 and FT232RL USB interface (Eagle... -
19
ArduinoPHP
Full control from browser of an Arduino
CONTROL ARDUINO WITH PHP * PROJECT DISCONTINUED DUE NEW I2C RELESE * The project is temporary stopped due heavy work load; i am in trouble to find spare time and "clear head" to get it forw. I'am looking for anyone who wants to grow it, obviously with my support. The complete source is anyway available on my homepage. -
20
EasyWall
Easy to use firewall for linux beginners.
New improved iptables tool, based on my earlier project Easy Linux Firewall, but rewritten from scratch using Perl. It's a simple rewrite for now, but i am working on adding some new features like. Some of the improvements will be web administration panel, automatic filtering daemon, TCP listener providing easy to use API so you can integrate it on many servers and centralize them in to one Web interface to control all of them. I am open to new ideas and also any kind of contributors, because... -
21
ISWYAD
ISeeWhatYouAreDoing - a tool for remote acces with very! low bandwith.
.../Hidden_Server.zip contains the "serious" version with a useful config.txt, no gui (server should run in background) and uses mainly ftp to get its commands, although you can connect via Tcp/Ip and the client from the Bin/Bin.zip or Bin/Client_Only.zip package. The hidden server has an English readme! For further information about the usage of the program please look at Doc/ or at the readmes in Bin.zip (currently both German, sorry). I hope v0.3.0 will follow till 12/12. -
22
BIOT Light System
System sterowania oświetleniem
System sterowania oświetleniem w budynku nie wymagający jednostki centralnej jako sterownika. System składa się z autonomicznych modułów w każdym kontakcie i przy źródle światła. Cała logika zawarta jest w tych modułach które porozumiewają się za pomocą wspólnej sieci. -
23
WIDA Tasks
This is a platform for an extremely powerful/versatile task scheduler.
This is a task scheduler which has no "built-in" functionality, it is more of a platform to code your own tasks. It is designed on the structure of "When-If-Do" which I have translated into Triggers, Conditions and Actions. So when building tasks, you first create "definitions" of the triggers, conditions and actions. This program gives you the ability to code up a form for each definition, which would pass parameters to the trigger, condition or action itself, allowing the user to define... -
24
nctdtool
nctdtool, a curses front-end for tdtool
A simple curses user interface for tdtool, Best way to install is to add following line to /etc/apt/sources.list deb http://switch.dl.sourceforge.net/project/nctdtool/debian/ stable main It's also possible to download the installation package and install it with dpkg -i, or just download nctdtool.py from the code. -
25
ATMEL ATMega1280 based powerful, multifunctional, reliable, expandable and extremely flexible hardware platform for home and industrial processes automation, robotic toys, security systems, education and enjoyment.