Search Results for "c# source code"
Sort By:
Showing 122 open source projects for "c# source code"
View related business solutions-
Build Agents and Models on One PlatformGemini Enterprise Agent Platform is Google Cloud's comprehensive platform for developers to build, scale, govern, and optimize agents and models. Choose from Google's most advanced models and third-party models like Anthropic's Claude Model Family.
-
$300 Free Credits for Your Google Cloud ProjectsLaunch your next project with $300 in free Google Cloud credits—no strings attached. Test, build, and deploy without risk. Use your credits across the entire Google Cloud platform to find what works best for your needs. After your credits are used, continue with always-free tier services. Only pay when you're ready to scale. Sign up in minutes and start exploring.
-
1
Arduino core for the ESP32
Arduino core for the ESP32
ESP32 is a single 2.4 GHz Wi-Fi-and-Bluetooth SoC (System On a Chip) designed by Espressif Systems. ESP32 is designed for mobile, wearable electronics, and Internet-of-Things (IoT) applications. It features all the state-of-the-art characteristics of low-power chips, including fine-grained clock gating, multiple power modes,and dynamic power scaling. For instance, in a low-power IoT sensor hub application scenario, ESP32 is woken-up periodically and only when a specified condition is... -
2
PX4 Drone Autopilot
PX4 Autopilot Software
PX4 is used in a wide range of use-cases, from consumer drones to industrial applications. It is also the leading research platform for drones and has been successfully applied to underwater vehicles and boats. PX4 provides a standard to deliver drone hardware support and software stack, allowing an ecosystem to build and maintain hardware and software in a scalable way. Drone development is complicated, and how to get started can be daunting and hard to navigate. These tutorials and... -
3
OpenMQTTGateway
MQTT gateway for ESP8266, ESP32, Sonoff RF Bridge or Arduino
OpenMQTTGateway project goal is to concentrate in one firmware different technologies and protocols, decreasing, by the way, the number of physical bridges needed, and hiding the different technologies singularity behind a simple & widespread communication protocol; MQTT. MQTT gateway for ESP8266, ESP32, Sonoff RF Bridge or Arduino with bidirectional 433mhz/315mhz/868mhz, Infrared communications, BLE, Bluetooth, beacons detection, mi flora, mi jia, LYWSD02, LYWSD03MMC, Mi Scale, TPMS, BBQ... -
4
Concourse
Concourse is a container-based continuous thing-doer written in Go
...Jobs can depend on other jobs by configuring passed constraints. The resulting chain of jobs and resources is a dependency graph that continuously pushes your project forward, from source code to production. -
Our Free Plans just got better! | Auth0You asked, we delivered! Auth0 is excited to expand our Free and Paid plans to include more options so you can focus on building, deploying, and scaling applications without having to worry about your security. Auth0 now, thank yourself later.
-
5
IRremoteESP8266
Infrared remote library for ESP8266/ESP32
Infrared remote library for ESP8266/ESP32. Send and receive infrared signals with multiple protocols. This library enables you to send and receive infra-red signals on an ESP8266 or an ESP32 using the Arduino framework using common 940nm IR LEDs and common IR receiver modules. e.g. TSOP{17,22,24,36,38,44,48} demodulators etc. Usage of the library has been slightly changed in v2.0. You will need to change your usage to work with v2.0 and beyond. You can read more about the changes required on... -
6
T3000_Building_Automation_System
T3000 Bacnet Building Automation System, graphical front end for bldgs
This is our T3000 Building Automation front end, a mature project for managing the air conditioning, lighting, access control and other automation functions of commercial buildings. The application runs on a Windows PC and allows the building operator to manage the building as a complete system. There is a small but growing team of developers working on the application full time. The system works mainly with Temco Controls products but integrators, controls contractors and other... -
7
MisterHouse is a Windows/Unix home automation program written in Perl. It can respond to voice commands, web browsers, time of day, serial port and X10 data, external files, etc and can speak via Text to Speech engines. Support is on https://sourceforge.net/p/misterhouse/mailman/misterhouse-users/ and code is maintained on https://github.com/hollie/misterhouse
-
8
langOS
Low power application-configurable Operating System
langOS is an open-source Operating System for Tiny Scale Devices. It supports platforms based on the MSP430 and AVR microcontrollers and is fully written in C. langOS aims to be simple, easy to configure and independent of the development host platform. It should be comfortable on Windows, Linux and MacOS platforms. -
9
Home Automation Control Center
An application to control DIY home automation products
This Perl/PostgreSQL application enables to control various do-it-yourself home automation products (such as air conditioning units or electric radiators). The code is highly portable for used with other DB (for example MySQL). It may be used as a scheduler with light modifications. User Interface is provided by the Home Automation Control Center UI project (https://sourceforge.net/projects/climcontrolui) -
Secure File Transfer for Windows with Cerberus by RedwoodCerberus supports unlimited users and connections on a single IP, with built-in encryption, 2FA, and a browser-based web client — all deployable in under 15 minutes with a 25-day free trial.
-
10
iSmart Home
An open smart home project.
We utilize technologies such as web-based APP, 2.4G wireless data transceiver, STC micro-controller, various sensors (temperature/humidity/brightness/air pressure/PIR/etc.), to construct an integrated solution of modern home automation. The system provides features such as remotely control your home appliances, lights, etc. Also, various sensors are supported to sense your home environment, and act on real time status accordingly. For instance, if there are people home, and light is dark,... -
11
Hotstrings
automatic text replacement tool
Microsoft Windows only. Example: you can define text replacement definition which after entering btw/ will automatically replace this string into by the way. Yes, you can define longer replacement text or even one triggerstring can trigger up to 7 versions of text replacements. Added value (💲💲💲): • operating system wide action: no matter in which editable window your cursor is placed, text replacement will work! • this function is similar to "AutoCorrect" function (Microsoft... -
12
TOISWITCH
TOISWITCH is a general-Purpose smart-home server for ESP8266
TOISWITCH is a general-Purpose multi I/O-Server for ESP8266. Its build as an easy-to-use Web-GUI-based server for a range of smart home devices. Currently it supports the following types of devices -Power plugs and Power strips incl power measurement -Multicolor (RGB/RGBW/RGBWW) LED lamps incl gamma correction -Switches -Dimmers -Motion detectors -Motor controls -Sensors It has an easy-to-use web-interface to control the devices and configure them. It supports powerful... -
13
bctl
1-wire based boiler/DHW/distribution heating system controller
...It includes provision for dumping excess heat to the distribution system, as well as provision for heat recovery during a cool-down cycle. The design is based on the 1-wire family of sensors and data I/O components. The software package is written in C++ and utilizes the owcapi and owlib facilities of the open-source owfs package for all 1-wire transactions. The software architecture is based on the QP hierarchical state machine framework developed by Quantum Leaps, and utilizes their QM modeling tool for state machine template generation. QP is an open-source package and QM is distributed free of charge. -
14
culfw
GPL'd firmware for the CUL family of devices
culfw is a GPL'd firmware for the CUL family of devices from http://busware.de. culfw is used in conjunction with the CUL/CUN/CUR and a high level software like fhem to automate some common tasks in the household like switching lamps / shutters / heating / etc. and to log events like temperature/humidity/power consumption. culfw supports following RF protocols: "SlowRF" mode: FS20: send/receiveo, FHT: send/receive, S300: receive, EM1000: receive, HMS: receive, Hoermann: receive. ESA2000:... -
15
SerialToIP is a simple Terminal Server software providing transparent pipe either in TCP server or TCP client socket mode from TCP/IP to a pre-configured serial port. Implemented in C# for .NET 2.0 so the command line version could work in Mono-runtime as well.
-
16
Kalliope
Kalliope is a framework to create your own personal assistant
Kalliope is a modular always-on voice-controlled personal assistant designed for home automation. Kalliope is a framework that will help you to create your own personal assistant. The concept is to create the brain of your assistant by attaching an input signal (vocal order, scheduled event, MQTT message, GPIO event, etc..) to one or multiple actions called neurons. You can create your own Kalliope bot, by simply choosing and composing the existing neurons without writing any code. But, if... -
17
TOISWITCH_OLD
A WLAN controlled home-automation switch
Hi, this small project is a Wlan controlled home automation switch featuring -Webserver including authentication -Multiple I/O-ports -Controlling via Web-Interface, MQTT or GET-Requests -Timer -Complex time plans -MQTT including MQTTs and authentication -Easy configuration -
18
AutoMine AutoRun
Create or record and edit missing keybindings, automate, be handsfree!
Press a created keybinding and go AFK, these keybindings will let you start automated keyboard and mouse input you recorded and edited yourself. Supports recording, editing and creating any keybindings to initiate automatic keyboard and mouse input. The tool will start preloaded with 2 keybindings that allow Auto-Run and Auto-Mine. AutoMine by pressing F5 will hold left click [LMB] when enabled AutoRun by pressing F6 will hold [W] + [LShift] when enabled This tool was made as a... -
19
HomePoint
Espressif ESP32 Based Smarthome screen for MQTT
Espressif ESP32 Based Smarthome screen for MQTT. Control your MQTT/HomeKit Smart Home Devices from an ESP32-powered screen. Homepoint is a screen-based interface for MQTT & HomeKit-connected Smarthome devices that runs on the ESP32 Chipset. See partially switched-on scenes with multiple devices at a glance. Support for temperature, humidity, air quality sensors & Tasmota energy readings. Remote Configuration: Configure and reboot HomePoint through a web interface. No need to reflash.... -
20
MQTT Hyperdash
A universal MQTT Dashboard for linux/Raspberry Pi.
MQTT-Hyperdash is a fast and efficient dashboard (GUI) for the MQTT framework. It uses the SDL library for graphics rendering, the paho library for communication and the gtk2 framework for user input. The dashboard runs on Linux, but a port to other operating systems is possible. Special features: * Very simple and basic set of base elements. * animated analog input elements, potentiometers. * Fast update rates of 20 Hz are possible. * Easy to use: Each panel/dashboard is... -
21
-
22
iHome by ionware
iHome Smart Home System Platform
iHome is a fully tested Smart Home Automation system using the Raspberry Pi Zero WiFi SBC and Linux OS and has all the functional features of NEST or ECOBEE smart thermostats with the added benefit of full privacy and security at less than half the price! It incorporates MBLogic with algorithms and Modbus coms for HVAC home control via the ionware modbus compatible ionC1 input/output controller board. The iHome software system comes fully configured as a SD Card image file for... -
23
GROWbox Supervisor System (GROWSS)
Automated Plant Environment Growing System using Raspberry Pi
GROWbox Supervisor System (GROWSS) is a grow box or grow cabinet environmental controller. GROWSS uses a Raspberry Pi (RPI) & Grove sensors to monitor and control the environment in your grow box or cabinet. Environmental factors such as temperature, humidity, soil moisture, & smoke (from fire) are monitored and displayed on a terminal connected to the RPI & on a mobile app. GROWSS also controls the exhaust fan and grow lights based on the time interval (ie. 12 hours on/12 hours off) &... -
24
openGalaxy
SIA receiver for Galaxy security control panels.
This project aims to provide a method for listening on a serial port and decode incoming messages from a Galaxy security control panel. The messages are transmitted using the SIA DC-03-1990.01 (R2000.11) protocol. The decoded messages are stored in a database (MySQL) or forwarded by email using ssmtp. Besides just listening for messages openGalaxy can also be used to arm/disarm the panel and much more... This software is still in a testing (beta) phase but has been tested successfully... -
25
Arduino garden PRS agent
A PRS agent designed to control our automated garden
This code implements a Procedural Reasoning System (PRS) agent for the control of our Arduino powered automated garden.
