Search Results for "libamd.so.1"

SimpleDCS is a Distributed Control System made easy - fully configurable both on hardware and a software level. Experimental stage (alpha)

If two or more people are responsible for something, either both do it, or none. Less often it only gets done once. This is an AVR ATTiny84 project that has features like putting the microcontroller to sleep to save battery. One button is to change from AM or PM, and the other is to turn on one of the LEDs representing the current choice for 5 seconds. The unit then goes to sleep, and the LEDs are off. It is powered by an 18650 and I put it all in a medicine bottle. A description of it's construction, as simple as it is, is at an instructable here: https://www.instructables.com/id/Did-We-Feed-the-Pets/ Current draw: Awake: 5 mA Sleeping: 0.13 uA (!)

eibnetmux multiplexes EIBnet/IP connections allowing to use one EIBnet/IP gateway (including Siemens N148/21) for multiple client applications (such as EIB programming tool ETS, a visualisation solution and other control software).

PUB! is a Programmable USB Button on which you can program with a sequence of keystrokes. When you press the button those keystrokes are "replayed" over a USB connection. The button is programmed using an innovative and slightly quirky interface that does not require any custom software to be installed on your computer. All you need is a text editor like Notepad or gedit.

This is an open-hardware Infrared Remote Controlled USB keyboard, without keys, implemented using a PIC micro-controller and MikroC. IRK! enables you to use your LEARNING remote control to control any system that you can plug a USB keyboard into (Windows, Linux, Mac). Great for controlling a home theatre system such as MythTV, XBMC or Media Center. No drivers are required. You can program *any* USB keyboard function (with or without Control, Alt, Shift and GUI modifiers) to a button on...

Stantor is a SCADA for home automation/domotic project. It drives : k8061-K8055(USB), K8000(I2C), Arduino Mega and Uno, X10, 1-Wire, electricity meters, Webcam (motion), infrared remote controls. It uses WEB browser, smartphone, xHTML, SOAP, Websocket, HTML5 Apache, mySQL, PHP, javascript and Ajax. Stantor allows control of electrical equipments like boilers, shutters, lamps, pumps, etc...connected to the 220V/110 VAC. Gathering information of various kinds such as temperature, light, switches, position sensors is provided by Stantor permanently in real time. ...

Open Source DCS (Distributed Control System). FreeDCS will give you everything you need to control your machines or process. It's being designed to be easy to use and deploy. It's composed of Logic designer, HMI designer and controller software.

Argos is an alternative to Commercial SCADA based on Linux Operative Systems. It Acquires data, Supervises and Executes actions on automatized processes. Argos es una alternativa a SCADA Comerciales basado en Sistemas Operativos Linux. Argos Adquiere datos, Supervisa y Ejecuta acciones en procesos automatizados.

...Ccide checks tables for conflicts and other errors. Input example: //DECISION_TABLE: // 1 3 2 2 | light == $$ /* 1=red, 2= yellow, 3=green. */ // N - - - | speed == STOPPED // - - Y - | speed == SLOW // - N - Y | speed == FAST // ______|___________________ // X - X - | Stop(); // - - - X | SlowDown(); // - X - - | SpeedUp(); //END_TABLE:

Firmware for small µController board with 4x PT1000 temperature channels which control the temperature in one room via two fan units. PIC18F4455 based hardware. Can be used to control temperature in the basement or guest house, within a computer case, etc.

Vedvarsha is an application for 2 purposes: 1. Handwariting script recognition that extracts recognized letters into documents. 2. OCR (Optical Character Recogniton) that works only for non-cursive and isolated characters. It depends upon libsyntactic,

...A chording keyboard or Chorded keyboard is an input device where characters can be typed by pressing multiple keys at the same time. A popular design is the 7-key chorder, where one key is used for each of the index finger, middle finger, ring finger and pinky, and 3 keys for the thumb. This can be used with either the left or right hand (or a chorder can be used for each hand, effectively doubling the typing speed). SpiffChorder hardware is based on Atmel AVR ATmega168, using Objective Development's V-USB (a software-only implementation of a low-speed USB device).

The goal of the See&Touch project is to design/implement a special mouse for disabled people, which allows a person to fully control a computer by using just vision and one single body movement. This project develops hardware, firmware and software.

Mostly academic research Project about next generation computing (Software only), trying to find new ideas and solutions how computers can work in the future using technologies like voice recognition and synthesisation. Everyone is invited to join in

Car Linux Object (CarLinO) is a framework, written in C++, for launch and control all others processes in the automotive embedded systems. Moreover CarLinO provides a graphic support based on OpenGL for the applications.

Working with microprocessors is one of the most creative, challenging and rewarding areas of electronic and software engineering. Open-USB-IO makes learning this process fun and easy.

BCIOP is a free, open and portable protocol standard for data exchnage with Brain Computer Interface devices. Compact deisgn allows its code to be easily implemented both on target microcontroller and the host computer.

OPNODE project - xAP home automation controllers with web interface, 1-Wire and X10.

As of Jan 2009, this project and NanoStack 1.x are no longer being actively developed or maintained. Instead there is an effort to add support for Sensinode/cc2430 hardware for the Contiki OS. http://www.sics.se/contiki/

This project aims to provide a common building block for projects such as ADEFU, SEA and VISUAL and other scada projects so that they have a common interface to the PLC\'s they communicate with. PLC\'s are Programmable Logic Controllers built to

The webcam4mouse program simulate the mouse working through the interpretation of webcam streams (using at most 3 webcams). An effective event of mouse (moving or clicking) can be joined with one (or more contemporaneous) movement finding by webcams.

Project Daedalus is an aim to bring Artificial Intelligence to the Machintosh Operating System (Mac OS X) to aid the user

This project is about developing a Linux for EMU

Enough lame computing! The project for re-desiging and re-writing the computer world, based on old & new ideas that have never been implemented in a practical way. Research in form of discussion is in the public forum at this sourceforge project page.

Voice interface to drive your operating system