Search Results for "xray-core"
Sort By:
Showing 32 open source projects for "xray-core"
View related business solutions-
Atera all-in-one platform IT management software with AI agentsAtera’s AI agents don’t just assist, they act. From detection to resolution, they handle incidents and requests instantly, taking your IT management from automated to autonomous.
-
Outgrown Windows Task Scheduler?Windows Task Scheduler wasn't built for complex, cross-platform automation. Get a free diagnostic that shows exactly where things are failing and provides remediation recommendations. Interactive HTML report delivered in minutes.
-
1
Synergy Core
The keyboard and mouse sharing tool
This is the open source core component of Synergy, a keyboard and mouse sharing tool. Control your computers with one mouse and keyboard. Control multiple computers using only one keyboard and mouse. Focus on developing software, designing, gaming and remove time switching between operating systems. Throw away the extra keyboards and spend time where it really matters. -
2
Arduino core support for STM32
STM32 core support for Arduino
This repo adds the support of STM32 MCU in Arduino IDE. This porting is based on STM32Cube MCU Packages including the HAL hardware abstraction layer, enabling portability between different STM32 devices via standardized API calls. The Low-Layer (LL) APIs, a lightweight, optimized, expert-oriented set of APIs designed for both performance and runtime efficiency. CMSIS device definition for STM32. Arduino.cc IDE allows to add easily new board thanks the "Boards Managers". More information... -
3
FanCtrl
FanCtrl allows you to automatically control the fan speed
...The project supports a range of control backends and integrations, including motherboard fan headers and several popular cooling ecosystems, and it can also pull sensor data from common monitoring tools so your fan logic can react to the readings you trust. A core concept is “auto fan control” profiles where you pick a target temperature sensor, select which fans should follow it, and then shape the curve via a graph-like interface. It also includes quality-of-life options like renaming items, choosing units (including Fahrenheit), and starting minimized for a set-it-and-forget-it setup. -
4
NeoPixelBus
An Arduino NeoPixel support library
...A library to control one wire protocol RGB and RGBW LEDs like APA106, SK6812, WS2811, WS2812, and WS2813 that are commonly referred to as NeoPixels and two-wire protocol RGB like Lpd8806, APA102, and SK9822 commonly referred to as DotStars. Supports most Arduino platforms. ESP32 support for using both RMT and i2s. RMT timing currently is sensitive to high interrupt frequency due to issues in the Core. There are multiple competing libraries, FastLED being the biggest and Adafruit NeoPixel being the most common for beginners. On ESP32, both FastLED and NeoPixelBus can provide more than one channel/bus. FastLED primarily uses RMT to support 8 parallel channels. NeoPixelBus now supports the RMTs 8 channels and two more channels using i2s. -
Retool your internal operationsBuild internal software that meets enterprise security standards without waiting on engineering resources. Retool connects to your databases, APIs, and data sources while maintaining the permissions and controls you need. Create custom dashboards, admin tools, and workflows from natural language prompts—all deployed in your cloud with security baked in. Stop duct-taping operations together, start building in Retool.
-
5
MongoDB NodeJS Driver
The MongoDB Node.js driver
...The driver features an asynchronous API which allows you to interact with MongoDB using Promises or via traditional callbacks. Whether you are new to MongoDB or you just want to brush up on the core concepts, you can check out the Fundamentals section which features material on using the Node.js driver. The connection URI is the set of instructions that the driver uses to connect to a MongoDB deployment. It instructs the driver on how it should connect to MongoDB and how it should behave while connected. The Authentication Mechanisms guide contains sample connection code using each authentication mechanism supported in the MongoDB Community Edition. ... -
6
Hangfire
An easy way to perform background job processing
An easy way to perform background processing in .NET and .NET Core applications. No Windows Service or separate process required. Backed by persistent storage. Open and free for commercial use. Easy to set up, easy to use. No Windows Service, no Windows Scheduler, no separate applications required. Background jobs are regular static or instance .NET methods with regular arguments, no base class or interface implementation required. -
7
A set of C language API's and firmware applications that manage access to the Digitrax LocoNet and the core hardware resources of the Atmel AVR family of devices, to allow custom embedded LocoNet devices to be developed using GCC
-
8
OptiBoot
Lightweight PC tool for startups, services, and hardware info
About "A lightweight PC utility that lets you easily manage startup applications, control system services, and view detailed hardware information—all in one place." NOTE: .NET Core 8 must be installed. -
9
RecordEditor
Editor for Fixed Width, Csv and Existing Xml files.
...As well as an editor, The following utilities are supplied * Formatted Compare * File Copy and reformat Utility * FileWizard this is use to work out the format of a File. It can generally find both Text and binary / packed deicimal fields in a file For Simple Csv you should look at its sister project reCsvEditor. Note: The core Editor code is also used in the "Protocol buffers editor" and "Avro Editor" -
Grafana: The open and composable observability platformGrafana is the open source analytics & monitoring solution for every database.
-
10
wkpu
Encrypted processor based on public RISC processor
A processor that works encrypted, based around the "wally" public RISCV implementation. This implementation of the `KPU' encrypted computing model makes no changes to the standard RISCV processor core other than broadening all paths to 128 bits instead of 32/64. It works instead via additional peripheral units and extra custom RISCV instructions. -
11
ESP8266 Arduino Core
ESP8266 core for Arduino
ESP8266 Arduino Core is the Arduino core for the ESP8266 WiFi chip. It brings support for the ESP8266 chip to the Arduino environment, allowing you to write sketches, use familiar Arduino functions and libraries, and run these directly on ESP8266 without the need for an external microcontroller. ESP8266 Arduino core comes with libraries that enable it to perform a number of things. -
12
xBridge - I2C/SMBus GUI
USB Bridge for SMBus/I2C, GPIO, & Clock
...It can control and transmit SMBus/I2C, GPIO, Clock and other interfaces through USB. The product includes software and hardware. It has the characteristics of easy use and development. The core chip is CP2112 Graphical software and operating manual can be downloaded for free at http://xbridge-m01.doidx.com Provide the underlying Java API, http://xsmbus-m01.doidx.com , which can do simple testing and develop user-specific graphical interface products. xSmbus-xx, xBridge-xx do not need to install the driver according to the operating system in advance, nor select the COM port requirement, as long as they are in the Java environment, they can be plug and play. ... -
13
Arduino HomeKit ESP8266
Native Apple HomeKit accessory implementation for the ESP8266 Arduino
...This library is built with ESP8266 Arduino Core 2.6.3. Lower versions may compile with errors. For ESP32, see Arduino-HomeKit-ESP32. The HomeKit running on ESP32 has a GREAT PERFORMANCE which is 10x faster than ESP8266. You should set the ESP8266 CPU to run at 160MHz (at least during the pairing process), to avoid the tcp-socket disconnection from the iOS device caused by a timeout. -
14
Uart32
Win32 API wrappers for accessing COM Uart in blocking mode
Uart32 is a C++ wrapper around the win32 Serial Port API that allows blocking-mode access to the COM port. This library works great for accessing a UART serial port from a background worker thread. It features: a simple c++ class. (temporarily removed for maintainance. Use DLL API Instead) built in per access timeout on data receive. a C-API wrapper that is exportable to C# DLL import class -
15
libcpuid provides CPU identification for the x86. It wraps the CPUID and RDTSC instructions in a portable manner and provides a lot of technical info about the processor, such as vendor, core codename, features/instruction sets, cache sizes, and more.
-
16
provaxantia
test project
...Very low effort for management, just put your subnet and set some schedule, after a couple of week the most of your machines will be in DB. After you collected data you can view them grouped and merged in variuous way. The core is wmic, a windows program that can get (almost) ALL info about every machine such as architecture, disk size, manufacturer, system type, serial number, memory size ... -
17
PowerLed
RGB power indicator
This is the software i created for controlling my PC's power indicator. The indicator has been replaced with an Arduino controlled RGB led. Core Temp is required and the Arduino code requires the CMD Messenger library. This software is in beta, and not 100% completed yet. -
18
UK Super-extended keyboard
UK international/unicode keyboard driver for Windows
Free Windows keyboard driver that extends AltGr to provide comprehensive accented character support (including multi-accented characters), international punctuation, IPA, medieval characters, mathematical and non-mathematical symbols, and more. Designed for UK keyboards and installs as a regular keyboard layout option. I might adapt it for US keyboards if there's enough interest. The driver should be stable (built using MSKLC, which is mature) but classified as beta because it has not... -
19
A utility to completely customize the Cool and Quiet feature of AMD K10 (Phenom etc.) processors. It may be used to overclock and/or undervolt the CPU, providing a high degree of tweaking flexibility.
-
20
Tool to identify your CPU using the cpuid instruction. Displays cache information, number of cores, codename, core stepping, ...
-
21
libhdlfltp is a VHDL library of floating point operators, all of which are parametrized, synthesizable to FPGAs and cover a number of the core operators in math.h.
-
22
This project is based on the sourceforge project tn5250j. The intention of this tn5250jEngine project was to capsulate a slim core modul interpreting the Telnet 5250 stream. This core module provides a 5250-ScreenGrid Interface for any GUI application.
-
23
-
24
lpcusb is a USB core stack for the built-in USB device of LPC214x microcontrollers. It handles the hardware interface and USB enumeration/configuration. Included are usage examples like USB joystick HID, USB virtual COM port and USB mass storage on SD-ca
-
25
OpenMAC is a TinyOS-based implementation of IEEE 802.15.4 MAC layer, which lies at the core of MeshNetics ZigBee stack, and provides basic wireless networking (star,peer to peer) to WSN's. Available for low-power ZigBit modules and Atmel AVR Z-Link Kits
