Search Results for "usbdm-flash-programmers"
Sort By:
Showing 28 open source projects for "usbdm-flash-programmers"
View related business solutions-
$300 Free Credits to Build on Google CloudPut your $300 in credit toward real workloads, then keep building with free monthly usage for 20+ products. No commitment and no charge until you upgrade.
-
Paessler - Monitor Your Whole Network in MinutesWaiting weeks for a monitoring rollout isn't an option when infrastructure doesn't stop running. PRTG's auto-discovery scans your network and suggests from over 200 pre-configured sensor types, so you're watching servers, applications and devices within minutes, not after a multi-week deployment. Enterprise-strength monitoring, without the enterprise complexity. Start your free trial today.
-
1
Open Source Cartridge Reader
A shield for the Arduino Mega that can back up video game cartridges
...Supported cartridge types so far, LoRom, HiRom, ExHiRom, DSP, SuperFX, SuperFX2, SDD1, CX4, SPC7110, SA1 (last two chips need Adafruit Clock Generator). Reads and writes SNES Satellaview 8M Memory packs (BS-X cartridge and Adafruit Clock Generator needed). Reads and writes Nintendo Power Super Famicom Memory Flash Cartridges (needs Adafruit Clock Generator for best result). -
2
Betaflight
Open Source Flight Controller Firmware
Betaflight is flight controller software (firmware) used to fly multi-rotor craft and fixed wing craft. This fork differs from Baseflight and Cleanflight in that it focuses on flight performance, leading-edge feature additions, and wide target support. Betaflight supports a wide range of flight controllers with at least an STM32F4 MCU. You can use nearly any piece of modern hardware out there. Full telemetry and high refresh rate for receivers, camera and VTX control, RGB LEDs, and much... -
3
stm32flash
Open source flash program for STM32 using the ST serial bootloader
Open source cross platform flash program for the STM32 ARM microcontrollers using the built-in ST serial bootloader over UART or I2C -
4
OpenOCD - Open On-Chip Debugger
The Open On-Chip Debugger
The "Open On-Chip Debugger" provides JTAG/SWD access from GDB (or directly with TCL scripts) to processors with ARM and MIPS based cores. See website for full list of supported targets. -
Host LLMs in Production With On-Demand GPUsDeploy your model, get an endpoint, pay only for compute time. No GPU provisioning or infrastructure management required.
-
5
Snappy Driver Installer Origin
Install and update drivers on Windows PCs.
Snappy Driver Installer Origin is a portable Windows tool to install and update device drivers. It can be used offline to install drivers where Internet isn't available. The perfect technicians tool. Download the latest version from the home page below. -
6
JxMake
A Java-based cross-platform build system.
JxMake is a Java-based, cross-platform build system primarily inspired by the syntax and features of GNU Make, Perforce Jam, and CMake. In addition, JxMake provides several capabilities not typically found in other console-based build systems, including a built-in lightweight GUI, serial console, serial plotter, multi-MCU in-system programmer, and more. Currently, JxMake's loadable libraries (build scripts) are primarily designed for non-OS MCU systems and experimental use. Full... -
7
workman-pkl
Workman and Workman for Programmers keyboard layout for PKL
Workman keyboard layout and Workman-P (Workman for Programmers) implemented for Portable Keyboard Layout (pkl.sourceforge.net). -
8
ESP8266 Arduino Core
ESP8266 core for Arduino
ESP8266 Arduino Core is the Arduino core for the ESP8266 WiFi chip. It brings support for the ESP8266 chip to the Arduino environment, allowing you to write sketches, use familiar Arduino functions and libraries, and run these directly on ESP8266 without the need for an external microcontroller. ESP8266 Arduino core comes with libraries that enable it to perform a number of things. It can communicate over WiFi through the use of TCP and UDP; it can set up HTTP, mDNS, SSDP, and DNS... -
9
UrJTAG aims to create an enhanced, modern tool for communicating over JTAG with flash chips, CPUs, and many more. It is a descendant of the popular openwince JTAG tools with a lot of additional features and enhancements.
-
Fully Managed MySQL, PostgreSQL, and SQL ServerCloud SQL handles your database ops end to end, so you can focus on your app.
-
10
WxPic allows, with a PC and an adapter (programmer), to program a PIC micro-controller, by loading a HEX file, reviewing and/or editing the configuration or memory and writing and/or verifying the device flash memory.
-
11
WiFi Duck
Wireless keystroke injection attack platform
A user-friendly open-source project to learn about keystroke injection attacks or ‘BadUSBs’. By emulating a USB keyboard, BadUSBs can gain full access to a computer in a matter of seconds! Unlike with other BadUSBs, you don’t need to install an app, log in, compile, or copy scripts onto an SD card. You simply connect via WiFi to manage all your scripts from within the web interface. This tool is intended to be used for testing, training, and educational purposes only. Never use it to do harm... -
12
ESP8266 USB Software Driver
Software-only ESP8266 USB Device
ESPUSB is a software-only USB device stack that adds low-speed USB capability to ESP8266 and ESP8285 microcontrollers. It implements the USB protocol primarily in software instead of relying on dedicated USB hardware. The design needs only a small amount of external circuitry and uses adjacent GPIO pins for the D+ and D- signals. It operates at USB low speed, making it suitable for human-interface devices and control-oriented peripherals. The repository includes an example that emulates a... -
13
LBSP
Real-Time Processing Library for OSHW Biomedical Sensors
Applications involving data acquisition from sensors need samples at a preset frequency rate, the filtering out of noise and/or analysis of certain frequency components. We propose a novel software architecture based on open-software hardware platforms which allows programmers to create data streams from input channels and easily implement filters and frequency analysis objects. The performances of the different classes given in the size of memory allocated and execution time (number of clock cycles) were analyzed in the low-cost platform Arduino-Genuino. This library is free to use for research. ... -
14
Snappy Driver Installer is an application for installing/updating drivers on PCs running Microsoft Windows using driverpacks or included folders with drivers. It can be used to install drivers on newly assembled PCs at places where Internet isn't available. Users can also use the software to keep their drivers up to date.
-
15
HSK
High Speed Karlsruhe open automotive code initiative
Since the summer of 2010, the FSAE team High Speed Karlsruhe uses Infineon's XC878 to power its electronics. The XC878 is an 8052 compatible 8-bit µC. Our dedication is to 8-bit real time applications, guaranteed by the powerful peripherals of the XC878. This project aims to publish those portions of our code, which may be of use to a wider audience. -
16
Simple Memory Card Interface
Hides API differences behind a simple interface
Accessing memory cards (the plastic ID cards, not the Flash cards) requires vendor-specific APIs and libraries. This module handles the differences in a configurable way and allows applications to read and write memory cards through a single, simple interface. -
17
ztex is a Firmware Kit with a corresponding Driver API for EZ-USB based hardware. The Firmware is written in C and assembled using a powerful macro processor. The Driver API allows the development of platform-independent device drivers.
-
18
Simple DDC/CI on AVR
Implementation of DDC/CI protocol on AVR for monitors
Project aims to provide simple but extensible implementation of 'slave' (i.e. monitor side) DDC/CI protocol on AVR ATmega microcontrollers. Current functionallity includes brightness control with DDC/CI and hardware buttons. Requires at least 4K flash, hardware TWI. -
19
hercules-390
Mainframe Emulator - Mirror of http://www.hercules-390.org/
...Jan Jaeger designed and implemented many of the advanced features of Hercules, including dynamic reconfiguration, integrated console, interpretive execution and z/Architecture support. A dedicated crew of programmers is constantly at work implementing new features and fixing bugs. -
20
This software supports programming of Atmel microcontrollers 89Sxx ('51), ATtiny, ATmega and 90Sxx (AVR). It can erase built-in Flash and EEPROM memories as well as read and program them. ISP Programmer also supports serial Atmel DataFlash memories.
-
21
A collection of tools for use in improving the ease of use and expanding the functionality of IronKey secure flash drives.
-
22
Windows disk image reading and writing software. This application is intended for use as a reader/writer for small flash drives. It is compatible with raw and gzipped disk images, including those used by m0n0wall.
-
23
Ddr-Z8E is a device driver library for the Zilog Z8 Encore!(r) microcontroller. The library supports I/O, IRQ, RS-232, I2C, SPI, A/D, WDT, ticker and built in flash memory as well as utility modules, e.g. for debugging and binary number representation.
-
24
-
25
WXWindows software for programming PIC Microcontrollers using KitsRUs programmers under Posix and Win32 environments. Please There is a known bug with the project statictics. This Project is very active and there is data in CVS.
