Search Results for "self-host"

HotKeys.js is an input capture library with some very special features, it is easy to pick up and use, has a reasonable footprint (~3kb) (gzipped: 1.73kb), and has no dependencies. It should not interfere with any JavaScript libraries or frameworks. You will need Node.js installed on your system. Or manually download and link hotkeys.js in your HTML, It can also be downloaded via UNPKG. react-hotkeys is the React component that listen to keydown and keyup keyboard events, defining and...

dfu-util is a host side implementation of the DFU 1.0 and DFU 1.1 specifications of the USB forum. DFU is intended to download and upload firmware to/from devices connected over USB.

smartmontools contains utility programs (smartctl, smartd) to control/monitor storage systems using the Self-Monitoring, Analysis and Reporting Technology System (S.M.A.R.T.) built into most modern ATA and SCSI disks. It is derived from smartsuite.

[Introduction] The xBridge-M01 product is a multifunctional USB bridge developed by Doidx. It can control and transmit SMBus/I2C, GPIO, Clock and other interfaces through USB. The product includes software and hardware. It has the characteristics of easy use and development. The core chip is CP2112 Graphical software and operating manual can be downloaded for free at http://xbridge-m01.doidx.com Provide the underlying Java API, http://xsmbus-m01.doidx.com , which can do simple...

...This project is something I wanted to do for a while to make cheap and light weight custom rc chips, and I decided to make it a real project when I found a wooden single use spoon which I wanted to turn into a boat. this project will host multiple version, some very simple ones, and some more complex. a similar thing can be said for the controllers, I will soon upload the schematics and designs for a steampunk style controller. but for a more simple understanding a simple remote might be a transmitter(led, speaker, or antenna for example) a button, and a capacitor to stabilize the button because every pulse you send changes the state. however high precission control is possible. ...

###### HDDtempNC has now moved to Github ###### ###### Please visit the Github project at https://github.com/viharm/HDDtempNC ###### HDDtempNC provides a script to acquire hard disk drive temperature for a target host by querying an existing HDDtemp daemon and then parse the results according to the request. See project wiki for more details, usage and code.

...You can program *any* USB keyboard function (with or without Control, Alt, Shift and GUI modifiers) to a button on your infrared remote control and when you press that button IRK! will send the corresponding USB keystroke to the host computer. You can program *any* USB Consumer Device control code too...for example, Play, Pause, Mute, Volume up, Volume down, and many others.

tbb is a simple command line interface for FT232R and FT245R Bit Bang Mode. Since version 0.02, I2C host emulation command tbbi2c added. And since version 0.05, you can build the binaries for mac, linux and windows (experimental).

ztex is a Firmware Kit with a corresponding Driver API for EZ-USB based hardware. The Firmware is written in C and assembled using a powerful macro processor. The Driver API allows the development of platform-independent device drivers.

Firmware for small µController board with 4x PT1000 temperature channels which control the temperature in one room via two fan units. PIC18F4455 based hardware. Can be used to control temperature in the basement or guest house, within a computer case, etc.

The GXPing component determines methods, with which GXPing component detects, if a remote computer is reachable. A successful Ping indicates that the remote host can be reached on the network.

Get and display the traffic counter of a Fritz!Box 7270 (or similar) in a human readable form on local host. The telnet daemon has to be enabled on the FritzBox to download the data file from the AVM router to local host.

XPMap for Hewlett-Packard XP and HDS USP Hi-End family Arrays: Visualization of Raid-groups, LDEVs/LUSEs and Host-groups.

The Host Bus Adapter API (Applications Programming Interface) is a C-level project to manage Fibre Channel Host Bus Adapters.

SMART (Self-Monitoring Analysis and Reporting Technology) interface for Delphi.

UCSC SMART suite controls and monitors storage devices using the Self-Monitoring, Analysis and Reporting Technology System(S.M.A.R.T.) build into ATA and SCSI Hard Drives. This is used to check the reliability of the hard drive and predict drive failures.

HBAVERIFY project is developing a C-based application for testing the Fibre Channel Host Bus Adapter (HBA) API, developed through the Storage Networking Industry Association (www.snia.org).

This project is developing a Java based CIM provider for Fibre Channel Host Bus Adapters (HBAs). It uses the common HBA API developed by the Storage Nerwork Industry Association (SNIA), available at: http://www.snia.org This project will conform to pro