Search Results for "multimedia note taking"

"KMI Wave-RAM" ("kmiwaveram") "kmiwaveram" contains a "Wave-RAM" of 8 banks of 16K sample words of 16bit each, which can possibly be used in a PPG synthesizer such as the "Wave 2.2", "Wave 2.3", or "EVU". For sample-transfer, "kmiwaveram" has a USB interface and an optional "PPG Communication Bus" interface. On a "CommBusTerm" system, the tools "cbmedimonitor" and "WaveProgEdit" can be used for "fast" sample-transfer to "kmiwaveram" via USB. "kmiwaveram" contains hardware and...

"CommBusTerm" is based on a "Raspberry Pi 4 Model B" or "Raspberry Pi 5", and the "kmicommbusmediator" interface, which provides connectivity to the "PPG Communication Bus" which is used by PPG synthesizers such as the "Wave 2.2", "Wave 2.3", "EVU". Hardware: * "kmicommbusmediator": https://sourceforge.net/projects/kmicommbusmediator/ * "kmiwaveram": https://sourceforge.net/projects/kmi-wave-ram/ Software: * "cbmedimonitor" control tool * "WaveProgEdit" sound-program editor *...

"KMI Comm. Bus Mediator" ("kmicommbusmediator") The project "kmicommbusmediator" provides connectivity for the "Raspberry Pi 4 Model B" and "Raspberry Pi 5" to the "PPG Communication Bus" which is used by PPG devices such as the "Wave 2.2", "Wave 2.3", "EVU", "PRK", "Waveterm A", "Waveterm B". "kmicommbusmediator" contains hardware and software components: * "kmicommbusmediator-HW": "Comm. Bus" hardware-interface * "CBMEDIBIOS": firmware for "kmicommbusmediator-HW" *...

VisualCube is a volumetric display out of 6*6*6 voxels, where each voxel get's represented by a 2-color LED. This project includes a bunch of tools used to control this peace of hardware, by taking advantage of the VisualCube library.

SANE backend and stand-alone driver for Canon CanoScan parallel scanners (FB320P, FB620P, FB330P, FB630P, N340P, and N640P). Please note FB310P is NOT currently supported, sorry. For USB model support go to http://canon-fb630u.sourceforge.net/

...You can use MMM to read out your Monitor Capabilities like physical Resolution, supported Resolutions and Refresh Rates, Vendor Informations, Firmware Version and current settings like Brightness, Contrast, Gamma and so on. You can use MMM also to send MCCS Commands to your Monitor to turning it into Standby, wake it up again and change its Brightness, Contrast or Gamma Settings. Note that this is done directly by the Monitor and NOT the Graphics Card. You can't believe that? Have a look to your Monitors On-Screen Display when changing Settings with MMM! Furthermore, MMM has methods to place a Window exacty to a Monitor relatively to global Desktop Coordinates and taking Screenshots from a Monitor Content.