Search Results for "ii"

...The GIT repository (CVS is deprecated) also includes a control unit application to control W-Bus capable devices, a W-Bus compatible heater unit firmware application and a heater simulator for testing purposes. Also, a serial port loop back driver for linux is included to simulate OBD II K-Line adapters.

Ardurail is an Arduino library for generating a TTL signal with an Arduino for serving model railroad equipment (locomotives, switches, feedback-detectors) based on the Motorola II protocol.

We provide MATLAB and Verilog Models of GeAr, and previously proposed adders (ACA-I, ETAII, ACA-II and GDA) at http://sourceforge.net/projects/approxadderlib/ GeAr is a low latency Generic Accuracy Configurable Adder that provides a higher number of potential configurations compared to state-of-the-art approximate adders, thus enabling a high degree of flexibility and trade-off between performance and output quality. These MATALB and Verilog models can allow software programmer as well as hardware designers to evaluate their code and design. ...

OpenSOC86 is an open implementation of the x86 architecture in Verilog. The current version only implements the 16-bit part (real mode). The processor is a pipelined architecture clocked at 100 MHz in a Cyclone II speed grade -6. Therefore it can be seen as similar to a 486 in real mode. Several peripherals are also implemented in a somewhat minimalistic way, but enough to be able to boot an IBM PCXT compatible bios and MSDOS 6.22. The current implementation is only proven to boot the bios and DOS in simulation. The system is targeted to run on the DE2-70 board. ...

Procbench is a CPU benchmark that tests math capabilities of your processor Ii will measure the performance of your CPU, FPU and the Cache/Memory subsystem. It is multiplatform (Windows, Linux, Bootable, DOS...)

Immersion Cooker Mk II: A food-oriented, feature-rich water-bath controller for slow cooking sous vide. Cook just about anything to perfection with open source hardware and software.

Temperature dependent overclock utility for AMD Phenom II BE processors, which provides functionality similar to Intel's Turbo Boost. .02 version mostly works with win7 (see forums).

This library allows you to control a PMS (Particle Measuring Systems) Lasair II air particles counter. You can either use a COM component from several programming languages (Visual Basic, ...) or directly use its underlying Python class.

This is an application for the Pioneer DRM5004X CD Changer. The software uses MySQL, TCP/IP (remote control) and SCSI II commands to control this changer.

The JBlaster is a software driver that allows you to configure Altera's PLDs and FPGAs through the ByteBlasterMV in JTAG mode under Linux and Windows NT, interfaceing via the parallel Port. The JBlaster parses a Quartus II generated chain descriptio

A ZigBee library for ZigBee Series I-II, this library keep a list of end device, their status, IO values, configurations, etc... the idea is keep updated all, all the time.