Search Results for "flash image software"

Betaflight is flight controller software (firmware) used to fly multi-rotor craft and fixed wing craft. This fork differs from Baseflight and Cleanflight in that it focuses on flight performance, leading-edge feature additions, and wide target support. Betaflight supports a wide range of flight controllers with at least an STM32F4 MCU. You can use nearly any piece of modern hardware out there. Full telemetry and high refresh rate for receivers, camera and VTX control, RGB LEDs, and much...

Ralph is built on top of Django and Python 3 and is easy to extend and customize without writing boilerplate code. REST API, Workflows code extensions allow for easy customization. We've chosen the best features of DCIM, Asset Mgmt and CMDB systems to create one, easy and well-integrated system. One interface is easier than 3. Keep track of assets purchases and their life cycle. Flexible flow system for assets life cycle. Data center and back office support. DC visualization built-in. Ralph...

AWS EC2 FPGA Development Kit is a set of development and runtime tools to develop, simulate, debug, compile and run hardware-accelerated applications on Amazon EC2 F1 instances. It is distributed between this GitHub repository and FPGA Developer AMI - Centos/AL2 provided by AWS with no cost of development tools. After creating an FPGA design (also called CL - Custom logic), developers can create an Amazon FPGA Image (AFI) and easily deploy it to an F1 instance. AFIs are reusable, shareable...

The "Open On-Chip Debugger" provides JTAG/SWD access from GDB (or directly with TCL scripts) to processors with ARM and MIPS based cores. See website for full list of supported targets.

...Built for researchers, drone operators, surveyors, developers, hobbyists, and digital artists, OpenReco aims to provide a transparent and extensible alternative to proprietary photogrammetry software. The project focuses on ease of use, performance, and reproducible workflows while embracing the open-source ecosystem. OpenReco supports image alignment, camera calibration, sparse and dense reconstruction, mesh generation, texturing, and export to common formats. Whether you're reconstructing archaeological sites, creating digital twins, generating terrain models, or building assets for games and visualization, OpenReco provides a powerful foundation without licensing restrictions.

ESP8266 Arduino Core is the Arduino core for the ESP8266 WiFi chip. It brings support for the ESP8266 chip to the Arduino environment, allowing you to write sketches, use familiar Arduino functions and libraries, and run these directly on ESP8266 without the need for an external microcontroller. ESP8266 Arduino core comes with libraries that enable it to perform a number of things. It can communicate over WiFi through the use of TCP and UDP; it can set up HTTP, mDNS, SSDP, and DNS...

A user-friendly open-source project to learn about keystroke injection attacks or ‘BadUSBs’. By emulating a USB keyboard, BadUSBs can gain full access to a computer in a matter of seconds! Unlike with other BadUSBs, you don’t need to install an app, log in, compile, or copy scripts onto an SD card. You simply connect via WiFi to manage all your scripts from within the web interface. This tool is intended to be used for testing, training, and educational purposes only. Never use it to do harm...

ESPUSB is a software-only USB device stack that adds low-speed USB capability to ESP8266 and ESP8285 microcontrollers. It implements the USB protocol primarily in software instead of relying on dedicated USB hardware. The design needs only a small amount of external circuitry and uses adjacent GPIO pins for the D+ and D- signals. It operates at USB low speed, making it suitable for human-interface devices and control-oriented peripherals. The repository includes an example that emulates a...

Snappy Driver Installer is an application for installing/updating drivers on PCs running Microsoft Windows using driverpacks or included folders with drivers. It can be used to install drivers on newly assembled PCs at places where Internet isn't available. Users can also use the software to keep their drivers up to date.

Since the summer of 2010, the FSAE team High Speed Karlsruhe uses Infineon's XC878 to power its electronics. The XC878 is an 8052 compatible 8-bit µC. Our dedication is to 8-bit real time applications, guaranteed by the powerful peripherals of the XC878. This project aims to publish those portions of our code, which may be of use to a wider audience.

This utility is used to create/maintain ROM images for flashing to the Ultimate 1MB device. It's main purpose is to customize your U1MB device to your needs.

We provide MATLAB and Verilog Models of GeAr, and previously proposed adders (ACA-I, ETAII, ACA-II and GDA) at http://sourceforge.net/projects/approxadderlib/ GeAr is a low latency Generic Accuracy Configurable Adder that provides a higher number of potential configurations compared to state-of-the-art approximate adders, thus enabling a high degree of flexibility and trade-off between performance and output quality. These MATALB and Verilog models can allow software programmer as well as hardware designers to evaluate their code and design. To the best of our knowledge, this is the first open-source library of approximate adders that facilitates reproducible comparisons and further research and development in this direction across various layers of design abstraction. This work is a result of collaborative effort between Chair for Embedded Systems (CES) at Karlsruhe Institute of Technology (KIT), Germany and Vision Image and Signal Processing (VISpro) Lab at SEECS-NUST, Pakistan.

This software supports programming of Atmel microcontrollers 89Sxx ('51), ATtiny, ATmega and 90Sxx (AVR). It can erase built-in Flash and EEPROM memories as well as read and program them. ISP Programmer also supports serial Atmel DataFlash memories.

Windows disk image reading and writing software. This application is intended for use as a reader/writer for small flash drives. It is compatible with raw and gzipped disk images, including those used by m0n0wall.

Ddr-Z8E is a device driver library for the Zilog Z8 Encore!(r) microcontroller. The library supports I/O, IRQ, RS-232, I2C, SPI, A/D, WDT, ticker and built in flash memory as well as utility modules, e.g. for debugging and binary number representation.

Feel pictures free of charge - SeebyTouch is the unique open source tactile vision substitution system available! Using the software and the construction manual it is possible for everyone to get pictures over the tactile sense! - Blindensehersatzsys

The GDB (GNU debugger) RSP (remote serial protocol) allows remote debugging of embedded software. This project offers source code of monitors so the developer only needs to burn flash EPROMs once, then use serial communication to download/debug.