Search Results for "flash"
Sort By:
Showing 22 open source projects for "flash"
View related business solutions-
Retool your internal operationsBuild internal software that meets enterprise security standards without waiting on engineering resources. Retool connects to your databases, APIs, and data sources while maintaining the permissions and controls you need. Create custom dashboards, admin tools, and workflows from natural language prompts—all deployed in your cloud with security baked in. Stop duct-taping operations together, start building in Retool.
-
Outgrown Windows Task Scheduler?Windows Task Scheduler wasn't built for complex, cross-platform automation. Get a free diagnostic that shows exactly where things are failing and provides remediation recommendations. Interactive HTML report delivered in minutes.
-
1
Open Source Cartridge Reader
A shield for the Arduino Mega that can back up video game cartridges
...Supported cartridge types so far, LoRom, HiRom, ExHiRom, DSP, SuperFX, SuperFX2, SDD1, CX4, SPC7110, SA1 (last two chips need Adafruit Clock Generator). Reads and writes SNES Satellaview 8M Memory packs (BS-X cartridge and Adafruit Clock Generator needed). Reads and writes Nintendo Power Super Famicom Memory Flash Cartridges (needs Adafruit Clock Generator for best result). -
2
Betaflight
Open Source Flight Controller Firmware
Betaflight is flight controller software (firmware) used to fly multi-rotor craft and fixed wing craft. This fork differs from Baseflight and Cleanflight in that it focuses on flight performance, leading-edge feature additions, and wide target support. Betaflight supports a wide range of flight controllers with at least an STM32F4 MCU. You can use nearly any piece of modern hardware out there. Full telemetry and high refresh rate for receivers, camera and VTX control, RGB LEDs, and much... -
3
stm32flash
Open source flash program for STM32 using the ST serial bootloader
Open source cross platform flash program for the STM32 ARM microcontrollers using the built-in ST serial bootloader over UART or I2C -
4
OpenOCD - Open On-Chip Debugger
The Open On-Chip Debugger
The "Open On-Chip Debugger" provides JTAG/SWD access from GDB (or directly with TCL scripts) to processors with ARM and MIPS based cores. See website for full list of supported targets. -
Atera all-in-one platform IT management software with AI agentsAtera’s AI agents don’t just assist, they act. From detection to resolution, they handle incidents and requests instantly, taking your IT management from automated to autonomous.
-
5
Snappy Driver Installer Origin
Install and update drivers on Windows PCs.
Snappy Driver Installer Origin is a portable Windows tool to install and update device drivers. It can be used offline to install drivers where Internet isn't available. The perfect technicians tool. Download the latest version from the home page below. -
6
ESP8266 Arduino Core
ESP8266 core for Arduino
ESP8266 Arduino Core is the Arduino core for the ESP8266 WiFi chip. It brings support for the ESP8266 chip to the Arduino environment, allowing you to write sketches, use familiar Arduino functions and libraries, and run these directly on ESP8266 without the need for an external microcontroller. ESP8266 Arduino core comes with libraries that enable it to perform a number of things. It can communicate over WiFi through the use of TCP and UDP; it can set up HTTP, mDNS, SSDP, and DNS... -
7
UrJTAG aims to create an enhanced, modern tool for communicating over JTAG with flash chips, CPUs, and many more. It is a descendant of the popular openwince JTAG tools with a lot of additional features and enhancements.
-
8
WiFi Duck
Wireless keystroke injection attack platform
A user-friendly open-source project to learn about keystroke injection attacks or ‘BadUSBs’. By emulating a USB keyboard, BadUSBs can gain full access to a computer in a matter of seconds! Unlike with other BadUSBs, you don’t need to install an app, log in, compile, or copy scripts onto an SD card. You simply connect via WiFi to manage all your scripts from within the web interface. This tool is intended to be used for testing, training, and educational purposes only. Never use it to do harm... -
9
WxPic allows, with a PC and an adapter (programmer), to program a PIC micro-controller, by loading a HEX file, reviewing and/or editing the configuration or memory and writing and/or verifying the device flash memory.
-
Grafana: The open and composable observability platformGrafana is the open source analytics & monitoring solution for every database.
-
10
Snappy Driver Installer is an application for installing/updating drivers on PCs running Microsoft Windows using driverpacks or included folders with drivers. It can be used to install drivers on newly assembled PCs at places where Internet isn't available. Users can also use the software to keep their drivers up to date.
-
11
HSK
High Speed Karlsruhe open automotive code initiative
Since the summer of 2010, the FSAE team High Speed Karlsruhe uses Infineon's XC878 to power its electronics. The XC878 is an 8052 compatible 8-bit µC. Our dedication is to 8-bit real time applications, guaranteed by the powerful peripherals of the XC878. This project aims to publish those portions of our code, which may be of use to a wider audience. -
12
Simple Memory Card Interface
Hides API differences behind a simple interface
Accessing memory cards (the plastic ID cards, not the Flash cards) requires vendor-specific APIs and libraries. This module handles the differences in a configurable way and allows applications to read and write memory cards through a single, simple interface. -
13
ztex is a Firmware Kit with a corresponding Driver API for EZ-USB based hardware. The Firmware is written in C and assembled using a powerful macro processor. The Driver API allows the development of platform-independent device drivers.
-
14
Simple DDC/CI on AVR
Implementation of DDC/CI protocol on AVR for monitors
Project aims to provide simple but extensible implementation of 'slave' (i.e. monitor side) DDC/CI protocol on AVR ATmega microcontrollers. Current functionallity includes brightness control with DDC/CI and hardware buttons. Requires at least 4K flash, hardware TWI. -
15
This software supports programming of Atmel microcontrollers 89Sxx ('51), ATtiny, ATmega and 90Sxx (AVR). It can erase built-in Flash and EEPROM memories as well as read and program them. ISP Programmer also supports serial Atmel DataFlash memories.
-
16
A collection of tools for use in improving the ease of use and expanding the functionality of IronKey secure flash drives.
-
17
Windows disk image reading and writing software. This application is intended for use as a reader/writer for small flash drives. It is compatible with raw and gzipped disk images, including those used by m0n0wall.
-
18
Ddr-Z8E is a device driver library for the Zilog Z8 Encore!(r) microcontroller. The library supports I/O, IRQ, RS-232, I2C, SPI, A/D, WDT, ticker and built in flash memory as well as utility modules, e.g. for debugging and binary number representation.
-
19
-
20
The Affordable BIOS Restoration Tool provides VHDL and C code to recover from failed BIOS upgrades using affordable CPLD's. EEPROM's and Flash chips can be restored with this flash programmer. Interfaces for DIP and tsop packages are being developed.
-
21
PROJECT IS DISCUNTINUED This project is about to contain information how to write data like boot loader into various flash devices on diffrent CPUs trough JTAG interface
-
22
The GDB (GNU debugger) RSP (remote serial protocol) allows remote debugging of embedded software. This project offers source code of monitors so the developer only needs to burn flash EPROMs once, then use serial communication to download/debug.
- Previous
- You're on page 1
- Next
