Search Results for "color"

Betaflight is flight controller software (firmware) used to fly multi-rotor craft and fixed wing craft. This fork differs from Baseflight and Cleanflight in that it focuses on flight performance, leading-edge feature additions, and wide target support. Betaflight supports a wide range of flight controllers with at least an STM32F4 MCU. You can use nearly any piece of modern hardware out there. Full telemetry and high refresh rate for receivers, camera and VTX control, RGB LEDs, and much...

...More complex effects can be created by dividing your string of LEDs into segments (up to ten) and programming each segment independently. Use the segment() function to program each segment's mode, color, speed, and direction (normal or reverse). Note, some effects make use of more than one color (up to three) and are programmed by specifying an array of colors. Random color introduced alternating from start and end of strip. Alternating white/red/black pixels running. Strobe effect with different strobe count and pause, controlled by speed setting. ...

This project represents a community-driven effort to provide an easy-to-build and easy-to-modify cartridge dumper. Completely stand-alone, does not need a PC to operate (unless for updating firmware). Easy to modify open-source code, write your own extensions and share them with others. Portable thanks to a battery. Modular design using mostly off-the-shelf components. Reads NES, Famicom and Family Basic cartridges including save. Supports Mapper 30/NESmaker and flashes INL NM30 boards....

Argus Monitor is a powerful fan-control and system-monitoring tool that gives you complete control over cooling behavior across your entire PC. It allows you to manage CPU, GPU, motherboard, and AIO fans using fixed values or advanced temperature-based control curves sourced from any sensor in your system. With multi-controller support, fan profiles, hysteresis, and temperature averaging, Argus Monitor offers smooth, precise fan adjustments with minimal noise fluctuation. The software also...

Monitoring for your hardware components - CPU - GPU - RAM - Drives - Network - Fans Various customization options, such as - display the app as an app bar (Windows) - autostart after you initially logged in (Windows) - docking location[s] on different screens - adjust application font size & width - tailor update interval to your needs - various color options for you to modify - enable or disable specific monitors, hardware or sensors - and more ! S.M.A.R.T. data of your drives You can show various S.M.A.R.T. attributes of your drives, such as health, temperature, power-on hours and more, by simply clicking on the drives name in the drives monitor. Please check out Github for more details and up-to-date new releases / versions ! ...

JxMake is a Java-based, cross-platform build system primarily inspired by the syntax and features of GNU Make, Perforce Jam, and CMake. In addition, JxMake provides several capabilities not typically found in other console-based build systems, including a built-in lightweight GUI, serial console, serial plotter, multi-MCU in-system programmer, and more. Currently, JxMake's loadable libraries (build scripts) are primarily designed for non-OS MCU systems and experimental use. Full...

...NDM works as follows: Decompress the app into desired directory and run. NDM creates TRAY icon, which shows current power drain from battery in Watts. Main window open first time and allows to configure alerting tray color (when done click Save to tray). There is possibility to set up Watt limit to tray icon background color change to Green, Yellow, Red. It also can blink from certain limit. Main window can shown / hidden by click on tray icon. Right click opens menu with Exit application item. Your settings are stored in standard ini file, autostart can be selected by writing to the registry.

This HTML utility allows the user to select standard color codes or surface mount numbers, then it identifies the resistor value. There is no need to memorize color codes or multipliers. An online working example of this program can be used at ZoomAviation.com/programs.

VisualCube is a volumetric display out of 6*6*6 voxels, where each voxel get's represented by a 2-color LED. This project includes a bunch of tools used to control this peace of hardware, by taking advantage of the VisualCube library.

Windows application released under GNU to precisely control color values for Alienware's AlienFX LED color schemes.