Search Results for "c programming"

This library features a variety of blinken effects for the WS2811/WS2812/NeoPixel LEDs. It is meant to be a drop-in replacement for the Adafruit NeoPixel library with additional features. You can search for WS2812FX in the Arduino IDE Library Manager or install the latest (or development) version manually. More complex effects can be created by dividing your string of LEDs into segments (up to ten) and programming each segment independently. Use the segment() function to program each...

The "Open On-Chip Debugger" provides JTAG/SWD access from GDB (or directly with TCL scripts) to processors with ARM and MIPS based cores. See website for full list of supported targets.

An ESP32-Dev WiFi focuser. DIY or PCB designs. (c) Robert Brown 2014-2025, Holger M, 2019-2021. All rights reserved. Code or portions of code may not be copied or used without appropriate credit given to authors. Spreadsheet to calculate what stepper motor to use. https://sourceforge.net/projects/arduinoascomfocuserpro2diy/files/Documentation/Nema-Stepper-Motors.xlsx/download Spreadsheets to calculate CFZ https://sourceforge.net/projects/myfocuserpro2-esp32/files/CFZ%20Spreadsheets/CFZ%20Spreadsheets.zip/download Focuser Basics Guide (PDF) - shows how to derive the correct motor requirements for your system (mandatory reading) https://sourceforge.net/projects/myfocuserpro2-esp32/files/Documentation/Focuser%20Basics.pdf/download Part1: Download, Configuration and Programming https://youtu.be/90KeSspN3e0 Project is superceded by myESP32S3-N16R8 WiFi Focuser

...BLDC gimbal motor, with a hollow shaft for mechanically & electrically connecting the LCD. PCB flexure and SMD resistors used as strain gauges for press detection (haptic feedback provided via the motor). USB-C (2.0) connector for 5V power and serial data/programming (CH340). Versatile back plate for mounting - use either 4x screws, or 2x 3M medium Command strips (with cutouts for accessing removal tabs after installation).

This software supports programming Logitech(R) Harmony(TM) remote controls. It provides most of the functionality of the Windows software provided by Logitech(R), but is much smaller and cross-platform. This software allows you to update or backup configurations, upgrade firmware, or do IR-learning. NOTE: Development has moved to github: http://www.github.com/jaymzh/concordance

This project experiments with C language to discover and design a programmable guitar amplifier effects micro controller computer section of a tube and solid state designed guitar amp. This a collaboration electronics project with my son. The goal of this project is to use Arduino hardware with C language programming to manipulate the guitar signal by various effects of phaser, flanger, reverb, digital delay and echo, and tremelo.

Velleman K8055 USB Experiment Interface Board driver. This driver provides a /proc interface which allows the inputs and outputs of the K8055 to be accessed as if they were files, making the K8055 accessible from any programming language and the shell. In addition to the /proc interface a joystick/input device is created for each K8055, Optionally a (user provided) script can be executed by the driver when it detects a change on one of the inputs or outputs.

Facilino is a Block programming environment for Arduino. Discover the great functionalities included in Facilino: Bluetooth Robot control IoT DYOR METEO

C and C++ library for the NIBObee, NIBO burger and NIBO 2 robots. The library contains libraries for AVR Studio and Arduino developement, USB drivers and the RoboDude programming software.

This project provides three different interfaces for programming embedded chips: a GObject based library (for developers), an executable binary (for computer geeks) and a GTK+3 front-end (for less geeky users). Actually NXP LPC and STM32 based chips are supported.

In-circuit programming (ISP) tool for the NXP (Philips) LPC800/LPC1100/LPC1200/LPC1300/LPC1700/LPC1800/LPC2000/LPC4300 series ARM7/Cortex-M0/Cortex-M0+/Cortex-M3/Cortex-M4 microcontrollers

serialLCD is Arduino based open-source project. It contains ATmega8 with given firmware file & the arduino library. The ATmega8 can be replaced by ATmega168/328. ATmega8 uses its 8MHz internal oscillator to reduce hardware (atmega8 no-xtal bootloader is used). The arduino library uses SoftwareSerial internally to communicate ATmega8 via digital pin 6 (only for uno/duemilanove or clone with atmega8/168/328, not for mega & due). Only one wire simplex serial communication at baudrate 9600 is...

microTone Module is analog interface to connect microcontrollers or digital logic systems with PCs. This interface use PC sound card’s audio output terminal to send commands to external hardware systems.

Relacy is a framework for agent-oriented programming in C++. Agents are autonomous objects, they interact fully asynchronously with messages. Relacy provides means for defining user agents and messages, as well as runtime system.

Third party open source drivers for the Mindstorms NXT programming environment RobotC. Most sensors available to the NXT platform are supported as well some additional ones. Refer to the Release Notes for more details.

Jcapi will open the world of ISDN (Integrated Services Digital Network) programming to Java developers.

OSlash is a c++ framework for developing decentralized cloud computing services. It includes a programming environment and virtual machine for assembling networks of processing nodes coordinate their operations through message passing.

Simple program making programming a DIP switch real easy. Small utility with a GUI to show how to set a card's DIP switches up for HEX coded I/O addresses or similar.

New programming language for SPS devices like Amtel Controller . The basic element of this language will be small Moduls of Code which work parallel (Multitasking). A Module can work indepent or with addiction to other Moduls.

Various utilities and libraries for writing Windows device drivers (kernel-mode programming), particularly KMDF drivers.

Object-oriented semantical AVR programming library. Developers needed!

A binary compatible, open source, reimplimentation of the FTD2xx library which works under Linux, Windows and MacOS X. The library can also compile into a wine DLL to allow Window programs to use the FTD2xx devices (such as PIC programming software).

The Host Bus Adapter API (Applications Programming Interface) is a C-level project to manage Fibre Channel Host Bus Adapters.

Project of SEP2 at HAW-Hamburg for programming an interface for a "XYZ-Schreiber"

SimpleNXT is an easy to use library for controlling the LEGO® NXT Robot using the .NET family of programming languages.