Search Results for "box"

...Completely free, open source and compatible with low cost eye-tracking devices, it is a great alternative to often expensive and complicated AAC (alternative and augmentative communication) products. It can also be used as an alternative to a physical keyboard or mouse. OptiKey runs on Windows and works right out of the box once an eye-tracking device is installed. Without an eye-tracking device however it can still be used with a mouse or webcam.

This firmware allows not only to have a cheap bridge between Wifi and serial, but also to have a web UI to configure wifi, to monitor 3D printer and even control it, and to make things easy, UI is fully customizable without reflashing FW. Firmware should work with any 3D printer firmware (repetier/marlin/smoothie ware using GCODE) if the serial connection has a correct setup. I currently use it with my personal flavor of repetier for Due based boards. The web interface files are present in...

Barrier is a software that works just like a KVM (keyboard, video and mouse) switch, which allows you to use a single mouse and keyboard to control several different computers by physically turning a dial on the box to switch the machine you're controlling at any given time. Barrier is able to do this in software, giving you control over different machines by simply moving your mouse to the edge of the screen, or by using a keypress to switch focus to a different system. Barrier was built to be simple and reliable, allowing you to control a different machine by simply using your mouse and keyboard from another. ...

...This work is licensed under the Creative Commons Attribution-ShareAlike 4.0 International License. To view a copy of this license, visit http://creativecommons.org/licenses/by-sa/4.0/ or send a letter to Creative Commons, PO Box 1866, Mountain View, CA 94042, USA.

Checks for new Nvidia Geforce Display Drivers then does an automated unattended install, or with many more options. You can silent install, and only just install the basics, no bloat! Instantly check to see if you have latest driver offering.

Open Source USB-Sensor Box. gnusb is a combined hardware/software project to provide a platform upon which users can build their own USB input/output devices, primarly for connecting Max/MSP and puredata to the outside world via sensors and digital i/o.

...Try out the examples ("Components"-Tab -> Choose a Circuit -> Add Button) Leave the Edit-Mode to control interactive elements Press >>Alt<< to draw a Selection-Box Press >>Shift<< to complement your Selection

This program allows the user to set a notification, which will be shown whenever a process they specified uses more/less CPU than a specified value (works with total CPU usage as well). Options allow user to fit the application to his preferences!

Get and display the traffic counter of a Fritz!Box 7270 (or similar) in a human readable form on local host. The telnet daemon has to be enabled on the FritzBox to download the data file from the AVM router to local host.

WIFI-BOX Firmware for WRT54G(s), Hacked with Linksys's GPL source code, Add more futures for this Wireless Router... Updated: Now support for GS version and Asus WL-500GS...

The goal of the OpenKVM project is to produce instructions for building a high-quality, low-cost electronic Keyboard-Video-Mouse (KVM) switch-box from easily obtainable parts.