Search Results for "analog clock c code"

This project represents a community-driven effort to provide an easy-to-build and easy-to-modify cartridge dumper. Completely stand-alone, does not need a PC to operate (unless for updating firmware). Easy to modify open-source code, write your own extensions and share them with others. Portable thanks to a battery. Modular design using mostly off-the-shelf components. Reads NES, Famicom and Family Basic cartridges including save. Supports Mapper 30/NESmaker and flashes INL NM30 boards....

This code works best with the NodeMCU V2 ESP8266 module and an 0.96" OLED display. To get you up and running in no time we created a kit that contains all the necessary parts. By buying this and other kits from us you are funding the maintenance and development of this library. Make sure you use a version of the Arduino IDE which is supported by the ESP8266 platform. If you are using the PlatformIO environment for building, choose one of the available IDE integration or the Atom-based IDE,...

...Lightweight desktop client, consuming around 10MB of memory. Runs from your system tray. Helpful notifications to let you know if something isn't working. The sliders are connected to 5 (or as many as you like) analog pins on an Arduino Nano/Uno board. They're powered from the board's 5V output (see schematic). The board connects via a USB cable to the PC. The code running on the Arduino board is a C program constantly writing current slider values over its serial interface. The PC runs a lightweight Go client in the background. This client reads the serial stream and adjusts app volumes according to the given configuration file.