Search Results for "interface" - Page 2
Sort By:
Showing 148 open source projects for "interface"
View related business solutions-
$300 Free Credits for Your Google Cloud ProjectsLaunch your next project with $300 in free Google Cloud credits—no strings attached. Test, build, and deploy without risk. Use your credits across the entire Google Cloud platform to find what works best for your needs. After your credits are used, continue with always-free tier services. Only pay when you're ready to scale. Sign up in minutes and start exploring.
-
Ship Agents FasterGemini Enterprise Agent Platform lets you rapidly build, scale, govern and optimize production-ready agents grounded in your organization's data. The platform enables developers to build custom or pre-built agents for virtually any use case. New customers get $300 in free credits.
-
1
Snappy Driver Installer Origin
Install and update drivers on Windows PCs.
Snappy Driver Installer Origin is a portable Windows tool to install and update device drivers. It can be used offline to install drivers where Internet isn't available. The perfect technicians tool. Download the latest version from the home page below. -
2
CommBusTerm
"CommBusTerm"
"CommBusTerm" is based on a "Raspberry Pi 4 Model B" or "Raspberry Pi 5", and the "kmicommbusmediator" interface, which provides connectivity to the "PPG Communication Bus" which is used by PPG synthesizers such as the "Wave 2.2", "Wave 2.3", "EVU". Hardware: * "kmicommbusmediator": https://sourceforge.net/projects/kmicommbusmediator/ * "kmiwaveram": https://sourceforge.net/projects/kmi-wave-ram/ Software: * "cbmedimonitor" control tool * "WaveProgEdit" sound-program editor * "WaveBackup" backups * "waveaddsynth" for additive synthesis * "wavetransientutil" for transient sounds Copyright (C) 2022-2026 by Klaus Michael Indlekofer. ... -
3
kmicommbusmediator
"KMI Comm. Bus Mediator"
...Bus Mediator" ("kmicommbusmediator") The project "kmicommbusmediator" provides connectivity for the "Raspberry Pi 4 Model B" and "Raspberry Pi 5" to the "PPG Communication Bus" which is used by PPG devices such as the "Wave 2.2", "Wave 2.3", "EVU", "PRK", "Waveterm A", "Waveterm B". "kmicommbusmediator" contains hardware and software components: * "kmicommbusmediator-HW": "Comm. Bus" hardware-interface * "CBMEDIBIOS": firmware for "kmicommbusmediator-HW" * "cbmedimonitor": control tool for "Raspberry Pi" Utilities: "wtafloppylist", "wtbfloppylist", ... Copyright (C) 2022-2026 by Klaus Michael Indlekofer. All rights reserved. Note: Special restrictions apply. See disclaimers below and within the distribution. (We are not affiliated in any way with companies/persons mentioned on this page. ... -
4
xBridge - I2C/SMBus GUI
USB Bridge for SMBus/I2C, GPIO, & Clock
...The core chip is CP2112 Graphical software and operating manual can be downloaded for free at http://xbridge-m01.doidx.com Provide the underlying Java API, http://xsmbus-m01.doidx.com , which can do simple testing and develop user-specific graphical interface products. xSmbus-xx, xBridge-xx do not need to install the driver according to the operating system in advance, nor select the COM port requirement, as long as they are in the Java environment, they can be plug and play. You can buy the product from: - China, https://shop255163877.taobao.com - Taiwan, you can buy on https://www.ruten.com.tw/user/index00.php?... -
Compliant and Reliable File Transfers Backed by Top Security CertificationsStop relying on non-certified, legacy file transfer tools that creak under the weight of modern security demands. Get full audit trails, advanced access controls and more supported by an award-winning team of experts. Start your free 25-day trial today.
-
5
SmartKnob
Haptic input knob with software-defined endstops and virtual detents
SmartKnob is an open‑source hardware/software hybrid rotary input device featuring software-configurable end-stops and virtual detents, facilitated by a brushless gimbal motor and magnetic encoder—offering programmable haptic feedback and a novel, tactile user interface. 240x240 round LCD ("GC9A01"), protected by 39.5mm watch glass on rotor. BLDC gimbal motor, with a hollow shaft for mechanically & electrically connecting the LCD. PCB flexure and SMD resistors used as strain gauges for press detection (haptic feedback provided via the motor). USB-C (2.0) connector for 5V power and serial data/programming (CH340). ... -
6
UrJTAG aims to create an enhanced, modern tool for communicating over JTAG with flash chips, CPUs, and many more. It is a descendant of the popular openwince JTAG tools with a lot of additional features and enhancements.
-
7
A cross platform, cross architecture .net library designed to make human interface device (HID) software development as easy and portable as possible.
-
8
react-native-keyboard-aware-scroll-view
ScrollView component that handles keyboard appearance
A ScrollView component that handles keyboard appearance and automatically scrolls to focused TextInput. You can use the KeyboardAwareScrollView, KeyboardAwareSectionList or the KeyboardAwareFlatList components. They accept ScrollView, SectionList and FlatList default props respectively and implement a custom high order component called KeyboardAwareHOC to handle keyboard appearance. The high order component is also available if you want to use it in any other component. Import... -
9
WiFi Duck
Wireless keystroke injection attack platform
...With the WiFi Duck, you can simply connect via WiFi to manage all scripts from within a web interface. This means that, unlike other BadUSBs, you don't need to install an app, log in, compile or copy scripts to an SD card. -
Stop Cyber Threats with VM-Series Next-Gen Firewall on AzureGain integrated visibility across all traffic in a single pass. Deploy Palo Alto Networks VM-Series to determine application identity and content while automating security policy updates via rich APIs.
-
10
WxPic allows, with a PC and an adapter (programmer), to program a PIC micro-controller, by loading a HEX file, reviewing and/or editing the configuration or memory and writing and/or verifying the device flash memory.
-
11
RaspberryLight
Make your Raspberry Pi to a Wi-Fi controllable LED Light
Make your Raspberry Pi to a Wi-Fi controllable LED Light using LED stripes with WS 2811 controller. This software enables the raspberry to provide a web server interface (HTTP / Rest) for controlling the connected LED stripe. That project bases on the WiringPi lib, Indy for Lazarus and also on the Tinkerforge bindungs for Lazarus. The Stripe must be connected with the Tinkerforge Masterbrick and the LED-Stripe bricklet. WiringPi is used to control the GPIOs for some feature and Indy (Internet Direct) is used to support all network feature like UDP-broadcasting and handling the HTTP-requests. ... -
12
xSMBus - Java I2C/SMBus API
USB Bridge for SMBus(I2C), GPIO, and Clock, Java API
[Introduction] xSmbus-m01 is not only a Java API, but also a program that can be executed separately. The following are its function options: Need to be executed at the command prompt, java -jar /YourPath/xSmbus-m01-1.0p.jar Help - list the parameter table Verification - verify that the product is working properly Test - used for system maintenance, in advance Check - determine if there is a device on the I2C location Scan - search in the range of 00-FF, search out on the I2C bus... -
13
L-ink_Card
Smart NFC & ink-Display Card
L-ink Card is a smart NFC card with an electronic-ink display built into the card form-factor, aimed at solving everyday pain points of IC cards and giving them a “cooler” interface. The project uses an STM32L0-series microcontroller paired with an ST25DV NFC chip, an e-ink screen, and battery management so the card can display dynamic info while also serving as an NFC tag/card. Its functionality may include showing balance, last transaction, QR codes, or other custom info on the e-ink screen, and interfacing with smartphones or readers via NFC. ... -
14
deej
Set app volumes with real sliders! Arduino project to build hardware
...They're powered from the board's 5V output (see schematic). The board connects via a USB cable to the PC. The code running on the Arduino board is a C program constantly writing current slider values over its serial interface. The PC runs a lightweight Go client in the background. This client reads the serial stream and adjusts app volumes according to the given configuration file. -
15
Velleman K8055 USB Experiment Interface Board driver. This driver provides a /proc interface which allows the inputs and outputs of the K8055 to be accessed as if they were files, making the K8055 accessible from any programming language and the shell. In addition to the /proc interface a joystick/input device is created for each K8055, Optionally a (user provided) script can be executed by the driver when it detects a change on one of the inputs or outputs.
-
16
DeneDown
Timed Sleep/Hibernate/Shutdown/Restart Tool
Sets your PC to sleep, hibernate, shutdown, or restart based on your time setting. Time may be set between 1 minute to 24 hours (in 1 minute increments). Countdown timer displays time remaining until the action occurs. This is a combined x64/x86 version. (Note: Tool is idle when time reads 0 hr:0 mins) Consider Windows 10 has changed the console "shutdown.exe" command to be active only for 30 minutes max. With DeneDown, you can extend your sleep/shutdown/hibernation period much longer,... -
17
stm32f7nucleo-eastrising-7inch-lcd-spi
STM32 Nucleo STM32F746ZG interface to East Rising 7 inch LCD Panel
An STM32 Nucleo-144 development board with Arduino Uno Rev3 connectivity is interfaced via an EastRising Technology Co Ltd Shield PCB to the East Rising 800x480 pixel 7 inch LCD panel with resistive touch screen. A set of functions has been developed to drive the panel via SPI, which uses the RAiO Technology Inc RA8875 TFT-LCD controller IC. Test firmware was developed that uses this function set to explore and demonstrate the many capabilities of the panel. The STM library is used along... -
18
EtherCard
EtherCard is an IPv4 driver for the ENC28J60 chip
...Non-AVR boards are NOT currently supported (101/Zero/Due) #211 Hardware: Depending on the size of the buffer for packets, this library uses about 1k of Arduino RAM. Large strings and other global variables can easily push the limits of smaller microcontrollers. This library uses the SPI interface of the microcontroller and will require at least one dedicated pin for CS, plus the SO, SI, and SCK pins of the SPI interface. An interrupt pin is not required. Any Arduino IDE >= 1.0.0 should be fine. EtherCard is available for installation in the Arduino Library Manager. Alternatively, it can be downloaded directly from GitHub. -
19
HDDtempNC
Tool to acquire hard disk drive temperature from the network interface
###### HDDtempNC has now moved to Github ###### ###### Please visit the Github project at https://github.com/viharm/HDDtempNC ###### HDDtempNC provides a script to acquire hard disk drive temperature for a target host by querying an existing HDDtemp daemon and then parse the results according to the request. See project wiki for more details, usage and code. -
20
control cd organizer devices with a plugin-based architecture. Currently supports Dacal DC-300 and KDS CDM-751
-
21
Open HPI is an open source implementation of the SA Forum's Hardware Platform Interface (HPI). HPI provides an abstracted interface to managing computer hardware, typically for chassis and rack based servers. The new location for the project is https://github.com/open-hpi/openhpi
-
22
Easiest Auto Shutdown
Shutdown PC whenever you want
This software allows you to set a shutdown hour for your system. Why should you choose this software? Simple... This is a non-profit software made by a student, this software doesn't contain any advertisment or similiar things. Just motivate a young student! HOW TO USE: -Insert the time -Click on the switch -Done :) -
23
CANopen for LabVIEW
LabVIEW CANopen client library
A collection of VIs for easier interface with basic CANopen client operations such as SDO download, SDO upload and PDO messages. Helper VIs for arbitrary mapping of dictionary objects to specific PDOs are also implemented. The project includes a quite crude implementation of the DSP 402 profile for handling motor drives in velocity and/or in position mode. -
24
USB Rubber Ducky
A human interface device programmable
The USB Rubber Ducky is a Human Interface Device programmable with a simple scripting language allowing penetration testers to quickly and easily craft and deploy security auditing payloads that mimic human keyboard input. The source is written in C and requires the AVR Studio 5 IDE from atmel.com/avrstudio. Hardware is commercially available. Imagine plugging in a seemingly innocent USB drive into a computer and installing backdoors, exfiltrating documents, or capturing credentials. ... -
25
Snappy Driver Installer is an application for installing/updating drivers on PCs running Microsoft Windows using driverpacks or included folders with drivers. It can be used to install drivers on newly assembled PCs at places where Internet isn't available. Users can also use the software to keep their drivers up to date.
