Search Results for "using"

smartmontools contains utility programs (smartctl, smartd) to control/monitor storage systems using the Self-Monitoring, Analysis and Reporting Technology System (S.M.A.R.T.) built into most modern ATA and SCSI disks. It is derived from smartsuite.

...It also incorporates features roughly equivalent to font-GDOS: - a caching system so you can use more fonts for a given amount of memory, - built in bezier functions This release includes ttf2gem, a utility program that creates accurate gem fonts from a true type font (new for 2.3) Using true type fonts gives you 3 big benefits: - you can choose from a vast range of true type fonts - true type fonts are scalable so you can have almost any size font you want - true type fonts need much less disk storage than typical gem printer fonts, so even on a low spec machine you can use lots of fonts. Gem fonts and true type fonts complement each other perfectly - gem fonts are small and fast, while true type fonts are device and resolution independent so are scalable to any point size at any resolution.

...Changes in v1.1: keep floppy drive motor state (as set by CP/M) when paging in Spectranet RAM (to avoid motor jumps). Unfortunately, motor state is controlled by the same hardware register as +3's memory paging features! Changes in v1.2: Avoid using Spectranet RAM page 0 used by the device itself. Thanks to this change this driver can be used with the upcoming driver for networked disk image. This driver can work along with spectran.fid driver exposing other networking capabilities of Spectranet device to the CP/M system.

This is the JEDEC and Source for both a Dual 7-Segment Hexadecimal and a Single 7-Segment Hexadecimal Display Driver using GAL22V10 and GAL16V8 PLDs. The driver uses a clocked input to multiplex the displays, so that one display is lit when the clock is high, and the other when the clock is low. With a fast enough clock speed the two displays both appear to be displayed at the same time. The code is written for WinCUPL. See the Instructables page for more details.

Clicker is a project for a Multitasking Open-source operating system written from scratch. based on a modular micro kernel. We want to explore new way of designing and using OSes :) [newz: PCI, NE2K and VBE]

...The Duration of the Project was 15-20 Days wherein we had to develop the driver library for the Watchdog Timer on LPC1114 and incorporate the same into FreeRTOS. The services of the driver are exported using the UNIX like read, write, Open and ioctl system calls used by the various tasks in the FreeRTOS environment to register with the Watchdog service. The Watchdog service itself is a task running as an idle task hook and services the watchdog on behalf of all the tasks that are registered with our driver. The driver would reset the system if any of the registered tasks do not perform as they should. ...

wmibam is a dockapp that monitors the apm status using the intellegent battery monitor (ibam) by Sebastian Ritterbusch to make statistical considerations to determine the currect battery status.

An open hardware and software platform, Octobits attempts to recreate the aesthetics of the early eight-bit computer age using cheap, powerful, and readily available modern components.

GoGetHardware (GGH) is a tool to show up the mounted hardware on a windows pc. GGH gets information about the system OS, the drivers and the hardware using MS WMI. Even like Everest Home Edition. GGH creates reports, to send these information to friends

Feel pictures free of charge - SeebyTouch is the unique open source tactile vision substitution system available! Using the software and the construction manual it is possible for everyone to get pictures over the tactile sense! - Blindensehersatzsys

Voxampp is an Enterprise IP TriplePlay Application Stack (eIPTAS) a - run-time toolkit - for Internet Entrepreneurs that want to deploy rich IP Carrier Networks. Its goal, to facilitate worldwide Open Access Social Networks using IPTV, VoIP and much more

Access Point Utilites for Unix - it's a set of utilites to configure and monitor Wireless Access Points under Unix using SNMP protocol. Utilites knownly compiles and run under Linux, FreeBSD, NetBSD, OpenBSD, MacOS-X, AIX, QNX.

A RTLinux X10 CM11 Driver using RT_COM. Plan on having a configuration file for input and control. In addition, plan on having output via HTML/CGI. Possibly have some control items via the web page.

M4DSP is a QRP (low power) hamradio digital signal processing (DSP) tranceiver using a comprehensive yet powerfull Cortex-M4 MCU from STMicroelectronics. The main goals are: low cost, low power consumption, IPhone-like size & weight, QRP CW RX & TX, SSB/AM/FM RX-only, digital modes by demand, GUI with TFT + touchscreen, waterfall spectrum, CAT communication link via low-speed USB, pure SDR-like mode via high-speed USB, one or more hamradio bands (160-10 m), optional support for general coverage RX (0-30 MHz).