Search Results for "atom-project"

Firmware for a power supply with an ATMega32 uC. The hardware is based on the DCG of the ctlab project from the german magazine c't.

CP/M Plus on ZX Spectrum +3 has ability to load device drivers from normal disk files (with .fid extension) on boot. A Spectranet device (apart from being networking interface) contains 128kB of extra RAM that can be accessed even with the Spectranet firmware disabled. This project proposes a FID driver that exposes Spectranet's extra memory as a ramdisk to the CP/M Plus system. Changes in v1.1: keep floppy drive motor state (as set by CP/M) when paging in Spectranet RAM (to avoid motor jumps). Unfortunately, motor state is controlled by the same hardware register as +3's memory paging features! Changes in v1.2: Avoid using Spectranet RAM page 0 used by the device itself. ...

...Program should work on any other SSP capable tape drives. Built specifically for Linux and AIX. Now supports key change auditing and key descriptors (uKAD). Check the Project News under the Develop section for more information. Project source code has moved to https://github.com/scsitape/stenc

INDI is an instrument neutral distributed interface control protocol that aims to provide backend driver support and automation for a wide range of Astronomical devices (telescopes, focusers, CCDs..etc). Project migrated to Github: https://github.com/indilib/indi

Clicker is a project for a Multitasking Open-source operating system written from scratch. based on a modular micro kernel. We want to explore new way of designing and using OSes :) [newz: PCI, NE2K and VBE]

The Project "WDT Driver for LPC1114 on FreeRTOS" was my Project work required for the partial Completion of my Post Graduate Diploma in Embedded System Design at Center for Development of Advanced Computing, Advanced Computing Training School, Pune, India. The Duration of the Project was 15-20 Days wherein we had to develop the driver library for the Watchdog Timer on LPC1114 and incorporate the same into FreeRTOS.

NOW ON GITHUB: https://github.com/MajenkoLibraries/GLCD Library to control the Winstar WG12864A (KS0108) 128x64 graphical monochrome LCD screen.

The Cobos Project is an Open Source initiative from Metrixware, dedicated to Mainframe COBOL CICS, DB2, IMS developments within the Eclipse Platform.

This project aims to port linux on the ETC WEP (Wireless Embedded Platform).

Roundhouse is a pair of C based embedded software applications to drive model railroad stepper motor based turntables. It consists of a stepper motor code and controller code connected by an I2C network. Written in C for PIC18/PIC16s processors.

An open hardware and software platform, Octobits attempts to recreate the aesthetics of the early eight-bit computer age using cheap, powerful, and readily available modern components.

Goal of the KGI Project is to provide the neccessary kernel level support (protection, virtualization and abstraction) for graphics hardware through a fast, secure and portable kernel graphics interface.

Uniform Driver Interface -- Public Source Code for runtime environments and drivers based on the UDI Specifications. Single source image for a driver, built once for each ABI (IA32, Sparc, etc.) and then run on any OS that provides UDI!

A driver for old scanner and modern Windows systems. Currently supported: Windows XP, 2003, Vista, 2008, Windows 7. All systems are 32-bit only. For more info look an the project homepage.

This project contains test software and tutorials for Analog Devices' Blackfin DSP device drivers and system services. See the wiki (in the menu bar above) for more info.

Pyramid Computer delivers its server with an LCD Display. This project implements an Windows Service controlling the output of the display and enable the user to show the values he needs. The service is implemented under C#.Net.

Bluetooth Universal Remote Controller Application (Burca) is an application thats allows you to get control over your Dslr-Camera via bluetooth.

The Yakko project is a home automation system. It defines a new protocol implemented as firmware running in AVR atmega microprocessors. The goal is to build a method to make logical connections between hardware devices such as lamps, switchers and so on.

This project uses massively parallel Graphics Processing Units(GPU) for neural network(Backpropagation) purposes.

Project Fish is a start kit for those who want to have study with ARM/PCB/DDK/.Net. PF will start from a Digital thermometer, with the implement of Hard ware design, firmware, Windows driver and app, the participator will got understading in that fields.

NETAYT releases driver and dialer for IPWireless mobile broadband modems as GPL open source project.

Project purpose: emulating a disk drive which information will be stored in a database through network.

SpinRepository is intended to be a central repository for Spin language objects for the Parallax Propeller microcontroller. This project is not sponsored by Parallax.

The Wolfram Machine project is an effort to create a set of documentation and useful modules (both hardware and software) for a computing architecture based on the mathematical theories presented in Steven Wolfram's book _A_New_Kind_of_Science_.

Project SUZAKU, home of software development based on SUZAKU FPGA board