Search Results for "software auth program"

OpenTabletDriver is an open-source, cross-platform, user mode tablet driver. The goal of OpenTabletDriver is to be cross-platform as possible with the highest compatibility in an easily configurable graphical user interface. OpenTabletDriver functions as two separate processes that interact with each other seamlessly. The active program that does all of the tablet data handling is OpenTabletDriver.Daemon. The daemon must be started in order for anything to work, however, the GUI is...

This library features a variety of blinken effects for the WS2811/WS2812/NeoPixel LEDs. It is meant to be a drop-in replacement for the Adafruit NeoPixel library with additional features. You can search for WS2812FX in the Arduino IDE Library Manager or install the latest (or development) version manually. More complex effects can be created by dividing your string of LEDs into segments (up to ten) and programming each segment independently. Use the segment() function to program each...

GeigerLog is a combination of data logger, presenter, and analyzer, and is now released in version 2.1! Based on Python (Version 3), it runs on Linux, Windows, Macs, Raspberry Pi, and other. GeigerLog is WiFi-enabled for servers and clients; it can be monitored by SmartPhone. Initially developed for Geiger counters, it is now a more universal tool, which equally well handles data like temperature, air-pressure, humidity, CO2. Continues to support Geiger counters like GQ Electronic's...

"CommBusTerm" is based on a "Raspberry Pi 4 Model B" or "Raspberry Pi 5", and the "kmicommbusmediator" interface, which provides connectivity to the "PPG Communication Bus" which is used by PPG synthesizers such as the "Wave 2.2", "Wave 2.3", "EVU". Hardware: * "kmicommbusmediator": https://sourceforge.net/projects/kmicommbusmediator/ * "kmiwaveram": https://sourceforge.net/projects/kmi-wave-ram/ Software: * "cbmedimonitor" control tool * "WaveProgEdit" sound-program editor * "WaveBackup" for backups * "waveaddsynth" for additive synthesis * "wavetransientutil" for transient sounds Copyright (C) 2022-2026 by Klaus Michael Indlekofer. All rights reserved. Note: Special restrictions apply. See disclaimers below and within the distribution. ...

This program aquires data from the oscilloscope LeCroy9400A, Advantest TR4131 and from the PM3311 (own propriatary bus). Dieses Programm liest Daten der Oszilloskope LeCroy9400A, Advantest TR4131 und PM3311 (eigene proprietäre Schnittstelle) aus.

[Introduction] The xBridge-M01 product is a multifunctional USB bridge developed by Doidx. It can control and transmit SMBus/I2C, GPIO, Clock and other interfaces through USB. The product includes software and hardware. It has the characteristics of easy use and development. The core chip is CP2112 Graphical software and operating manual can be downloaded for free at http://xbridge-m01.doidx.com Provide the underlying Java API, http://xsmbus-m01.doidx.com , which can do simple...

...It is equipped with a large B/W screen, two buttons, accelerometer, magnitometer, current and voltage sensors, light sensor, internal temperature sensor, battery-backed real-time clock, a buzzer and has connection ports for external speed sensor (motor Hall, phase or reed switch), a Bluetooth SPP dongle, up to three temperature sensors (TMP36, LM35, KTY83 etc), cadence sensor, throttle handle, output to controller throttle input. The project includes: The hardware (schematics & drawings) The firmware (microcontroller program) The software (for mobile phones and PC) Project developement is being tracked (in Russian) here: http://electrotransport.ru/ussr/index.php?topic=24226.0

This is a small library that allows comunicating with a Webasto (tm) W-Bus capable car heating system. Runs on Personal Computers or for embedded devices (slim design). Easily portable. Includes a Heater manager, heater controller program and more. The GIT repository (CVS is deprecated) also includes a control unit application to control W-Bus capable devices, a W-Bus compatible heater unit firmware application and a heater simulator for testing purposes. Also, a serial port loop back...

XPD (stands for "eXtended Parameter Designer") is an alternative to "KeyWin e-Bike Lab Parameter Designer" software used to program the so-called "Infineon" e-bike controllers. * It provides some additional features missing in the original program, and is generally easier to use. * It is opensource so you can learn how it works and add unique features to it or customize to suit your own needs. * It is cross-platform: works on Linux, Windows and Android.

PUB! is a Programmable USB Button on which you can program with a sequence of keystrokes. When you press the button those keystrokes are "replayed" over a USB connection. The button is programmed using an innovative and slightly quirky interface that does not require any custom software to be installed on your computer. All you need is a text editor like Notepad or gedit.

usbpicprog is a Microchip PIC programmer with simple hardware: one PIC18F2550 and some components. It's therefore easy and cheap to build. Usbpicprog consists of 3 components: Hardware, Embedded software and a stand-alone program for Win, Mac and Linux.

PyMW is a Python module for parallel master-worker computing in a variety of environments. With the PyMW module, users can write a single program that scales from multicore machines to global computing platforms.

You can use your ION Drum Rocker as midi device in your PC with this program. Also you can edit midi notes associated with drum kicks. You need install .NET Framework 2 and MidiYoke for use.

This Java program calculates the SPBRG value for a given baud rate (Baudrate) and clock frequency. It comes with a graphical interface and a simple value interpretation guide. A Java Webstart file (.jnlp) is provided.