Search Results for "parallel port control"

Betaflight is flight controller software (firmware) used to fly multi-rotor craft and fixed wing craft. This fork differs from Baseflight and Cleanflight in that it focuses on flight performance, leading-edge feature additions, and wide target support. Betaflight supports a wide range of flight controllers with at least an STM32F4 MCU. You can use nearly any piece of modern hardware out there. Full telemetry and high refresh rate for receivers, camera and VTX control, RGB LEDs, and much...

...There are multiple competing libraries, FastLED being the biggest and Adafruit NeoPixel being the most common for beginners. On ESP32, both FastLED and NeoPixelBus can provide more than one channel/bus. FastLED primarily uses RMT to support 8 parallel channels. NeoPixelBus now supports the RMTs 8 channels and two more channels using i2s.

The Monsputer is a Z80 computer developped with old chips (and some new) collected over the years. It has about 2M memory, clocks at 4.0MHz, has serial ports, 1 parallel port, 1 CAN bus, 2 SPI, 1 I2C, a RTC and other features. It supports interrupts mode 2 but not DMA.

...xSmbus-xx, xBridge-xx do not need to install the driver according to the operating system in advance, nor select the COM port requirement, as long as they are in the Java environment, they can be plug and play. You can buy the product from: - China, https://shop255163877.taobao.com - Taiwan, you can buy on https://www.ruten.com.tw/user/index00.php?s=doidx

DIY Arduino Boards PCF8674 MCP23017 74HC595 CD4021 I2C Parallel IO Piezo buzzers See the Files section for a wide range of sensors and sample code Schematics PCB Layout Sample Code

...Runs on Personal Computers or for embedded devices (slim design). Easily portable. Includes a Heater manager, heater controller program and more. The GIT repository (CVS is deprecated) also includes a control unit application to control W-Bus capable devices, a W-Bus compatible heater unit firmware application and a heater simulator for testing purposes. Also, a serial port loop back driver for linux is included to simulate OBD II K-Line adapters.

libieee1284 is a cross-platform library for parallel port access.

Input/output (IO) C library exposing a common API for real mode and permission-restricted access to parallel port under Windows, Linux and MS-DOS operative systems. It also allows pin-by-pin port access.

Currently-under-development library of OS-independent objects to provide complex parallel port control, high-resolution timers and other similar facilities needed when using PC I/O ports to control external digital electronics.

We are developing a suite of software to control USB I/O devices. Initially the support will be for Windows and Linux hosted Human Interface Devices (HID) although hopefully this will extend to virtual comms. port control in the future. API coming...