Search Results for "esp8266"

This code works best with the NodeMCU V2 ESP8266 module and an 0.96" OLED display. To get you up and running in no time we created a kit that contains all the necessary parts. By buying this and other kits from us you are funding the maintenance and development of this library. Make sure you use a version of the Arduino IDE which is supported by the ESP8266 platform. If you are using the PlatformIO environment for building, choose one of the available IDE integration or the Atom-based IDE, install libraries 561, 562, and 563 with "platformio lib install", adapt the WeatherStationDemo.ino file to your needs. ...

Alternative firmware for ESP8266 with easy configuration using webUI, OTA updates, automation using timers or rules, expandability and entirely local control over MQTT, HTTP, Serial or KNX. Unless your Tasmota powered device exhibits a problem or you need to make use of a feature that is not available in the Tasmota version currently installed on your device, leave your device alone - it works so don't make unnecessary changes!

This library features a variety of blinken effects for the WS2811/WS2812/NeoPixel LEDs. It is meant to be a drop-in replacement for the Adafruit NeoPixel library with additional features. You can search for WS2812FX in the Arduino IDE Library Manager or install the latest (or development) version manually. More complex effects can be created by dividing your string of LEDs into segments (up to ten) and programming each segment independently. Use the segment() function to program each...

An Arduino NeoPixel support library supports a large variety of individually addressable LEDs. Please refer to the Wiki for more details. Please use the gitter channel to ask questions as the GitHub Issues feature is used for bug tracking. A library to control one wire protocol RGB and RGBW LEDs like APA106, SK6812, WS2811, WS2812, and WS2813 that are commonly referred to as NeoPixels and two-wire protocol RGB like Lpd8806, APA102, and SK9822 commonly referred to as DotStars. Supports most...

ESP8266 Arduino Core is the Arduino core for the ESP8266 WiFi chip. It brings support for the ESP8266 chip to the Arduino environment, allowing you to write sketches, use familiar Arduino functions and libraries, and run these directly on ESP8266 without the need for an external microcontroller. ESP8266 Arduino core comes with libraries that enable it to perform a number of things.

Blinker library for embedded hardware. Works with Arduino, ESP8266, ESP32. When we learn new embedded hardware, we usually started with the sketch Blink. We think Blink is the hello world of embedded hardware. We aim to build an easy learn IoT solution project, which is like Blink a led. So we named this project blinker with this inspiration. blinker is a cross-hardware, cross-platform solution for the IoT.

...This library is built with ESP8266 Arduino Core 2.6.3. Lower versions may compile with errors. For ESP32, see Arduino-HomeKit-ESP32. The HomeKit running on ESP32 has a GREAT PERFORMANCE which is 10x faster than ESP8266. You should set the ESP8266 CPU to run at 160MHz (at least during the pairing process), to avoid the tcp-socket disconnection from the iOS device caused by a timeout.

MySensors is an open-source hardware and software community focusing on do-it-yourself home automation and Internet of Things. We're here to help people who'd like to create original and affordable sensors and actuators based on components like Arduino, ESP8266, Raspberry Pi, NRF24L01+ and RFM69. Does it sound complicated? Don’t worry, we’ll explain everything. We provide easy-to-follow build instructions, ready-to-use code examples, and adaptable open-source hardware designs. All of this runs on the MySensors software library for secure communication that has been battle-tested with more than 20 of the leading home automation controllers on the market. ...