Search Results for "card"

...The intention of this project is to do this without intrusion in privacy: You don't need to track people-owned devices if you just want to count them. Therefore, Paxcounter does not persistently store MAC addresses and does no kind of fingerprinting the scanned devices. Data can either be stored on a local SD-card, transferred to the cloud using LoRaWAN network or MQTT over TCP/IP, or transmitted to localhost using serial (SPI) interface. LED Matrix display (similar to this 64x16 model, can be ordered on Aliexpress). SD-card (see section SD-card here) for logging pax data.

...The Lichee NanoKVM is available in two versions: NanoKVM Lite is a basic configuration that is suitable for individual users with certain DIY capabilities and enterprise users with bulk requirements. The NanoKVM Full is a full version with a sophisticated case and complete accessories, as well as a built-in system mirror card that is ready to use at boot, and is recommended for individual users.

Betaflight is flight controller software (firmware) used to fly multi-rotor craft and fixed wing craft. This fork differs from Baseflight and Cleanflight in that it focuses on flight performance, leading-edge feature additions, and wide target support. Betaflight supports a wide range of flight controllers with at least an STM32F4 MCU. You can use nearly any piece of modern hardware out there. Full telemetry and high refresh rate for receivers, camera and VTX control, RGB LEDs, and much...

acsccid is a PC/SC driver for Linux/Mac OS X and it supports ACS CCID smart card readers. This library provides a PC/SC IFD handler implementation and communicates with the readers through the PC/SC Lite resource manager (pcscd).

...The AIO Driver Update tool helps you automatically detect and install the latest versions of the most important and frequently updated drivers, including: 🔧 Most Popular Drivers That Need Regular Updates: Graphics Card Drivers (NVIDIA, AMD, Intel) Boost gaming performance, resolve display issues, and unlock new visual features. Audio Drivers (Realtek, Creative, ASUS) Fix sound glitches, enhance audio quality, and ensure compatibility with new software.

VoodooHDA Installer is an open source audio driver Installer for devices compliant with the Intel High Definition Audio specification. It is intended as a replacement for AppleHDA on Mac OS X with support for a wide range of audio controllers and codecs. Taken from projects https://sourceforge.net/projects/voodoohda/ https://github.com/MuntashirAkon/DPCIManager https://github.com/sveinbjornt/Platypus

L-ink Card is a smart NFC card with an electronic-ink display built into the card form-factor, aimed at solving everyday pain points of IC cards and giving them a “cooler” interface. The project uses an STM32L0-series microcontroller paired with an ST25DV NFC chip, an e-ink screen, and battery management so the card can display dynamic info while also serving as an NFC tag/card.

...Currently it is possible to communicate with a smartcard directly connected to a Arduino board or connected via a TDA8024T (or compatible chips. e.g. DS8024). All tests have been done with a smart card slot connected directly to the Aruino board. Working: - Activation of asynchronous and synchronous smart cards - Exchanging data with supported Smart card (Sending / Receiving) - Asychron T=0 APDU communication. - Basic sychron communication - ETU calculation from TS byte. - Support class for SLE4432 / SLE4442 / SLE4441 and SLE4440 compatible sychron smartcards. ...

Catweasel-OSX is a project with the goal of developing a complete driver suite for the Catweasel MK3 and MK4 PCI card on Mac OS X. It will include floppy, joystick and SID drivers.

This project provides a chip card interface device driver for the PC/SC Lite server deamon (pcscd). The driver provides a standard PC/SC interface to NFC devices supported by libnfc. Note, that this project is currently not actively developed. However, the code has been adopted by the libnfc-Team. See https://code.google.com/p/ifdnfc/source/checkout.

Firmware and Hardware for an MP3 player using an AVR Butterfly, VS1001K decoder and SD/MMC card with FAT filesystem.

This driver is intended to be used on any machine running Darwin or MacOS X with a JMicron SD Card reader such as the Dell Mini 9. It may also be extended to work with other SDHCI compliant hosts.

Nvidia geForce based video card drivers for Mac OS X Operating System running on x86 hardware.

This project is an attempt to port of the ipw2200 driver for the intel2200bg wireless ethernet card from linux and freebsd (iwi) to make it functional under Darwin using the usual I/O Kit method. All help is welcomed and required ;)

K8055 is a Mac OS X based control panel for the Velleman K8055 USB I/O card. It's a Cocoa / Obj-C application which can be used to control the K8055 from your desktop. The source will also provide a starting point for other K8055 interfacing applications.

Kernel level driver for GEMPLUS's GPR400 Smart Card reader and pcsc ifd interface library.