Search Results for "xray-core"
Sort By:
Showing 43 open source projects for "xray-core"
View related business solutions-
Vibes don’t ship, Retool doesVibe coding tools create cool demos, but Retool helps you build software your company can actually use. Generate internal apps that connect directly to your data—deployed in your cloud with enterprise security from day one. Build dashboards, admin panels, and workflows with granular permissions already in place. Stop prototyping and ship on a platform that actually passes security review.
-
Outgrown Windows Task Scheduler?Windows Task Scheduler wasn't built for complex, cross-platform automation. Get a free diagnostic that shows exactly where things are failing and provides remediation recommendations. Interactive HTML report delivered in minutes.
-
1
Synergy Core
The keyboard and mouse sharing tool
This is the open source core component of Synergy, a keyboard and mouse sharing tool. Control your computers with one mouse and keyboard. Control multiple computers using only one keyboard and mouse. Focus on developing software, designing, gaming and remove time switching between operating systems. Throw away the extra keyboards and spend time where it really matters. -
2
Arduino core support for STM32
STM32 core support for Arduino
This repo adds the support of STM32 MCU in Arduino IDE. This porting is based on STM32Cube MCU Packages including the HAL hardware abstraction layer, enabling portability between different STM32 devices via standardized API calls. The Low-Layer (LL) APIs, a lightweight, optimized, expert-oriented set of APIs designed for both performance and runtime efficiency. CMSIS device definition for STM32. Arduino.cc IDE allows to add easily new board thanks the "Boards Managers". More information... -
3
NeoPixelBus
An Arduino NeoPixel support library
...A library to control one wire protocol RGB and RGBW LEDs like APA106, SK6812, WS2811, WS2812, and WS2813 that are commonly referred to as NeoPixels and two-wire protocol RGB like Lpd8806, APA102, and SK9822 commonly referred to as DotStars. Supports most Arduino platforms. ESP32 support for using both RMT and i2s. RMT timing currently is sensitive to high interrupt frequency due to issues in the Core. There are multiple competing libraries, FastLED being the biggest and Adafruit NeoPixel being the most common for beginners. On ESP32, both FastLED and NeoPixelBus can provide more than one channel/bus. FastLED primarily uses RMT to support 8 parallel channels. NeoPixelBus now supports the RMTs 8 channels and two more channels using i2s. -
4
MongoDB NodeJS Driver
The MongoDB Node.js driver
...The driver features an asynchronous API which allows you to interact with MongoDB using Promises or via traditional callbacks. Whether you are new to MongoDB or you just want to brush up on the core concepts, you can check out the Fundamentals section which features material on using the Node.js driver. The connection URI is the set of instructions that the driver uses to connect to a MongoDB deployment. It instructs the driver on how it should connect to MongoDB and how it should behave while connected. The Authentication Mechanisms guide contains sample connection code using each authentication mechanism supported in the MongoDB Community Edition. ... -
Atera all-in-one platform IT management software with AI agentsAtera’s AI agents don’t just assist, they act. From detection to resolution, they handle incidents and requests instantly, taking your IT management from automated to autonomous.
-
5
Hangfire
An easy way to perform background job processing
An easy way to perform background processing in .NET and .NET Core applications. No Windows Service or separate process required. Backed by persistent storage. Open and free for commercial use. Easy to set up, easy to use. No Windows Service, no Windows Scheduler, no separate applications required. Background jobs are regular static or instance .NET methods with regular arguments, no base class or interface implementation required. -
6
A set of C language API's and firmware applications that manage access to the Digitrax LocoNet and the core hardware resources of the Atmel AVR family of devices, to allow custom embedded LocoNet devices to be developed using GCC
-
7
Armadeus is an OpenSource Hardware and Software project based on an ARM core (Freescale i.MX) and Linux. You can consult our wiki at http://www.armadeus.org to join our non profit association or our commercial website at http://www.armadeus.com .
-
8
RecordEditor
Editor for Fixed Width, Csv and Existing Xml files.
...As well as an editor, The following utilities are supplied * Formatted Compare * File Copy and reformat Utility * FileWizard this is use to work out the format of a File. It can generally find both Text and binary / packed deicimal fields in a file For Simple Csv you should look at its sister project reCsvEditor. Note: The core Editor code is also used in the "Protocol buffers editor" and "Avro Editor" -
9
wkpu
Encrypted processor based on public RISC processor
A processor that works encrypted, based around the "wally" public RISCV implementation. This implementation of the `KPU' encrypted computing model makes no changes to the standard RISCV processor core other than broadening all paths to 128 bits instead of 32/64. It works instead via additional peripheral units and extra custom RISCV instructions. -
Grafana: The open and composable observability platformGrafana is the open source analytics & monitoring solution for every database.
-
10
Blynk C++ Library
Blynk library for embedded hardware
Blynk is the most popular Internet of Things platform for connecting any hardware to the cloud, designing apps to control them, and managing your deployed products at scale. With Blynk Library you can connect over 400 hardware models (including ESP8266, ESP32, NodeMCU, all Arduinos, Raspberry Pi, Particle, Texas Instruments, etc.)to the Blynk Cloud. With Blynk apps for iOS and Android apps you can easily drag-n-drop graphic interfaces for any DIY or commercial project. It's a pure WYSIWG... -
11
ESP8266 Arduino Core
ESP8266 core for Arduino
ESP8266 Arduino Core is the Arduino core for the ESP8266 WiFi chip. It brings support for the ESP8266 chip to the Arduino environment, allowing you to write sketches, use familiar Arduino functions and libraries, and run these directly on ESP8266 without the need for an external microcontroller. ESP8266 Arduino core comes with libraries that enable it to perform a number of things. -
12
xBridge - I2C/SMBus GUI
USB Bridge for SMBus/I2C, GPIO, & Clock
...It can control and transmit SMBus/I2C, GPIO, Clock and other interfaces through USB. The product includes software and hardware. It has the characteristics of easy use and development. The core chip is CP2112 Graphical software and operating manual can be downloaded for free at http://xbridge-m01.doidx.com Provide the underlying Java API, http://xsmbus-m01.doidx.com , which can do simple testing and develop user-specific graphical interface products. xSmbus-xx, xBridge-xx do not need to install the driver according to the operating system in advance, nor select the COM port requirement, as long as they are in the Java environment, they can be plug and play. ... -
13
Generic SCSI target subsystem for Linux SCST allows creation of sophisticated storage devices. It includes generic SCSI target core with SCSI target drivers and backend handlers. There are target drivers for iSCSI, Fibre Channel, SRP, SAS, FCoE, etc.
-
14
Arduino HomeKit ESP8266
Native Apple HomeKit accessory implementation for the ESP8266 Arduino
...This library is built with ESP8266 Arduino Core 2.6.3. Lower versions may compile with errors. For ESP32, see Arduino-HomeKit-ESP32. The HomeKit running on ESP32 has a GREAT PERFORMANCE which is 10x faster than ESP8266. You should set the ESP8266 CPU to run at 160MHz (at least during the pairing process), to avoid the tcp-socket disconnection from the iOS device caused by a timeout. -
15
Core Adjust
Adjust various settings of Intel Processors.
Core Adjust is a software tool that can be used to adjust various settings of 4th generation (Haswell) and later Intel(tm) processors on Debian/GNU and other Linux systems. -
16
lm-sensors
lm-sensors repository
lm-sensors is the canonical Linux project for reading motherboard and peripheral hardware sensors—temperatures, fan speeds, voltages—and exposing them to userspace. It ships a probing utility (sensors-detect) that identifies I²C/SMBus chips and kernel drivers, then a runtime tool (sensors) that prints human-readable readings for quick diagnostics. The companion library, libsensors, gives applications a stable API to query sensor values, enabling desktop applets, monitoring daemons, and... -
17
XFreq
a UNIX GUI to monitor Core i7 & Core 2 processors
XFreq provides a GUI to monitor the Processor frequencies (including Turbo Boost), the temperatures, C-States; and to alter the operational features of the Intel Core i7 processor. XFreq is also programmed for Core 2 and other Intel 64-bits architectures. -
18
CPU Hot Plugging
A program that can plugging CPU core
CPU Hot Plugging (chp) is created by Kafabih (kr code) inspired by Thunderzap android custom kernel cpu governor to reduce battery consumptions because of your laptop CPU usages. Please use carefully, chp can cause system crash or hang because of hot plugging cpu core. -
19
libcpuid provides CPU identification for the x86. It wraps the CPUID and RDTSC instructions in a portable manner and provides a lot of technical info about the processor, such as vendor, core codename, features/instruction sets, cache sizes, and more.
-
20
acers3fand
Script which controls your Acer Aspire S3 Ultrabook fan speed
acers3fand is a script which controls your Acer Aspire S3 Ultrabook fan speed by cpu temperature. It is designed to work with Intel Core i5 CPU but might work with other cpus as well. -
21
USB 2.0 for Real-Time provide a hard real-time capable implementation of an USB 2.0 stack on top of Linux/Xenomai. It implements the stack core and EHCI, UHCI and OHCI host controller drivers.
-
22
A linux kernel module inspired by i7z that enables unprivileged users to monitor informations like current frequency (including Turbo Boost!) and temperature of Intels Core i processor family.
-
23
AOT4L is a Qt4 based monitor and overclocking tool for ATI (TM) based video cards under Linux OS which loads into system tray and stay runing all the time. It has support to read and change fan speed, memory and core clocks, thermal sensor values.
-
24
c2ctl is an Intel Core and Core 2 frequency and voltage modification utility. Its main purpose is overclocking and / or "undervolting" and to enable SpeedStep.
-
25
Tool to identify your CPU using the cpuid instruction. Displays cache information, number of cores, codename, core stepping, ...
