Search Results for "router"

...The 802.11 Wi-Fi protocol contains a so-called deauthentication frame. It is used to disconnect clients safely from a wireless network. Because these management packets are unencrypted, you just need the MAC to address of the Wi-Fi router and of the client device which you want to disconnect from the network. You don’t need to be in the network or know the password, it’s enough to be in its range. With the 802.11w-2009 updated standards, management frames are encrypted by default.

wl500g is ASUS Oleg's based custom firmware. It is free with custom firmware features, and supports the following branches and models: 1.9.2.7-rtn (mainstream, 2.6.22 kernel based, supports: > ASUS RT-N16, RT-N15U, RT-N12, RT-N12B1, RT-N10, RT-N10U, RT-N10UB1, WL-500gP, WL-500gPv2, WL-500W); 1.9.2.7-d (stable/suspended, 2.4.37 kernel based, supports: > ASUS WL-500gP, WL-500gPv2, WL-500W, WL-500gX, WL-520gU, WL-550gE, WL-330gE, WL-320gE, WL-320gP).

...Supported USB to Ethernet adapters: 3Com, AboCom (10/100 and HPNA), Accton/SMC (some models), ADMtek, AEI, Allied Telesyn, ATEN, Belkin (some models), Billionton, Corega FEther, D-Link (some models), EasiDock, ELECOM, Elsa Micolink, Gigabyte GN-BR402W Wireless Router, GOLDPFEIL, Hawking, Hewlett-Packard HN210C, IO DATA, Compaq iPAQ Networking, Kingston KNU101TX Ethernet, LANEED, Linksys, MELCO/BUFFALO, Microsoft MN-110, NETGEAR FA101, OCT, Philips USB 10/100 Ethernet, smartNIC 2 PnP Adapter, SOHOware NUB100/NUB110 Ethernet, SpeedStream USB 10/100 Ethernet

Linux ATM Drivers for the Geos Multiport ADSL2+ router, Solos PCI Multiport ADSL2+ modem and Pulsar PCI ADSL Card

Firmware for robots made using OpenWRT router and open-robotics.ru hardware

Firmware to run the TrendNET TEW-652BRP version 2.x wireless router in client mode. Based on GPL firmware provided by TrendNET and modified to change the operating mode of the router from Access Point to wireless client.

This project provide a reconfigurable asynchronous SDM router which can be configured into a basic wormhole router or an SDM router with multiple virtual circuits in every direction. Features: * 5-port router for mesh network (0 south, 1 west, 2 north, 3 east, 4 local) * The dimension order routing (XY routing) * Available flow control methods: wormhole, SDM, VC * Reconfigurable number of virtual circuits, buffer size, data width * Fully synthesizable router implementation * SystemC testbench provided Languages: * Routers are written in synthesizable SystemVerilog * Test benches are provided by SystemC Software requirements: * The open source Nangate 45nm cell library * Synopsys Design Compiler (Synthesis) * Cadence IUS -- NC Simulator (for SystemC/Verilog co-simulation)

Software system for FlowScreen Router, with SempGate FPGA firmware and Intel EP80579 based board, it implements a high performance (1.5M pps network traffic) router system with open architecture for 3-rd party network application development.

Get and display the traffic counter of a Fritz!Box 7270 (or similar) in a human readable form on local host. The telnet daemon has to be enabled on the FritzBox to download the data file from the AVM router to local host.

WIFI-BOX Firmware for WRT54G(s), Hacked with Linksys's GPL source code, Add more futures for this Wireless Router... Updated: Now support for GS version and Asus WL-500GS...

A replacement firmware distribution for the 3com 3CRADSL72 a.k.a 3com wireless 11g (distributed by Ya.com) and its identical twin, the SMC7804WBRA, with an ucLinux kernel based system and associated system tools.

HericomMesh is a linux distribution for the Linksys WRT54G. This is a replacement firmware for this low cost router. The Hericom Mesh uses a public networking standard AODV, to build the mesh.

The B.A.U. (BinGO! Admin Util) is a small PHP-program under GPL to change the default interface and WAN partner of the BinTec BinGO! router. Most times it will be used to switch from one ISP to another very fast. It can be used under every OS supporting a