Search Results for "physical"

...Receivers can expose protocols including CRSF, SBUS, SUMD, HoTT telemetry, MAVLink, and PWM. Firmware updates can be delivered over Wi-Fi, while Bluetooth or Wi-Fi modes can emulate a simulator joystick. Bind phrases simplify pairing without requiring physical bind-button procedures. The project also supports telemetry, displays, and remote configuration of compatible video transmitters and receivers.

The DarkLight Cover/Calibrator (DLC) is a DIY project to build a motorized telescope cover, flat panel, or a combination flip-flat system. Its modular design supports various setups: a 12V light panel without a servo for a wall-mounted calibration panel, a servo-only cover for sky flats, or both integrated into a flip-flat mechanism. The DLC also includes optional dew heating to reduce extra equipment and cabling. With available drivers, it works with ASCOM or INDI. We’re excited to...

uLan is message oriented multi-master communication protocol for microcontrollers. It uses 9-bit character format for addressing and link control and RS-485 physical layer. More RS-485 cards, converters for PC RS-232 ports and embedded MCUs are supported

...OWFS is also ported to embedded routers, Mac OSX and Windows. Basically you can use these inexpensive little sensors and other chips with very simple wiring to sense and control the physical environment. The interface is very flexible -- everything from a web browser, to read and writing directly to the chip's "file" to integrating with your programs -- even over the internet. There is a growing number of 1-wire sensors: temperature, voltage, humidity, light, ultraviolet, pressure, thermisters, thermocouples, programmable microcontrollers, relays, lights, LCD panels, etc

Since the summer of 2010, the FSAE team High Speed Karlsruhe uses Infineon's XC878 to power its electronics. The XC878 is an 8052 compatible 8-bit µC. Our dedication is to 8-bit real time applications, guaranteed by the powerful peripherals of the XC878. This project aims to publish those portions of our code, which may be of use to a wider audience.

The BIOE system is an open-hardware platform to bridge the gulf between open-source CACSD systems like Scilab and the physical plant. It is intended for engineers, students, hobbyists, and anyone interested in automation and mechatronic.

Growlight facilitates management of all storage devices known to the Linux kernel, from hardware RAIDs to hybrid media to ramdisks to ZFS (indeed, Growlight was initially written to simplify ZFS on Linux). It understands the majority of partition and filesystem types, as well as both software and hardware RAID, LVM, and encrypted disks.

...Parrot sells the drone as a toy controlled via a wireless device such as Ipods, Ipads, or Android based devices. Parrot advertises the toy as an advance in gaming because the control devices will project a virtual reality allowing users to play with their physical drone with an enhanced version on their controller where bullets or hot air balloons must be avoided in the virtual world. KIPR, KISS Institute for Practical Robotics is an organization that facilitates the learning of robotics programming in middle and high school students to peak an interest in computer science. To do this they hold competitions around the world called botball where students program autonomous land robots to perform various sets of tasks. ...

...Standard Call - List : blank od -l - System name (if lsb_release installed) - Architecture (with uname) - Kernel loaded (/proc/cmdline) - BIOS- or EFI-mode loaded - Device (/dev/sdXY) and partition count - Model name, disk size and logical/physical sector size - start, end and size in sectors and Bytes - filesystem (if mounted) - mountpoint (if mounted) - label - UUID When the script runs with root privileges, there are three more information: EFI- or BIOS-Mainboard, name of the partition table (msdos. GPT, ...) and the partion-id by partition without UUID, e.G.: ID 05, extended. ...

mmapper allows to access every resource attached to the machine. It can read and write any physical address on the memory bus, any I/O port and any field of the PCI space configuration of any peripheral.

The goal of zAutomation project is to design/implement hardware, firmware and software for remote control and monitoring of physical objects, by using the ZigBee technology and internet. The field of application is robotics and domotics.

Expandy allows full control of the Gnome desktop environment through a single button interface. This gives people with physical disabilities access to a computing environment by emulating keyboard and mouse events using a button and on-screen feedback.