Search Results for "personal"

A 3-channel fully automated Dew Controller (DIY project) based on Arduino Nano for telescopes. For $48 or less. (c) Copyright Robert Brown 2014-2025. All Rights Reserved. Permission is granted for personal and Academic use only. Code or portions of code may not be copied or used without appropriate credit given to author. A very popular project with over 48,000 downloads. There is a new ESP32 WiFi version at https://sourceforge.net/projects/esp32-dew-controller/ The older myDCP2 (two-channel dew controller) is found here https://sourceforge.net/projects/arduinonanodewcontrollerpro/files/myDewController%20v200%202channel/

To develop an Arduino Nano based GPS module that is low cost, portable and can be used in Astronomy. (c) Copyright Robert Brown 2014-2024. All Rights Reserved. Permission is granted for personal and Academic use only. Code or portions of code may not be copied or used without appropriate credit given to author.

...🔗 New GitHub Repository: 👉 https://github.com/10thTeeAstronomy/DarkLight_CoverCalibrator © Nathan Woelfle 2025. All Rights Reserved. Permission granted for personal and academic use only. Code may not be copied or used without proper credit.

myFocuserPro is an ASCOM and Moonlite compatible stepper motor telescope focus controller (DIY) based on Arduino Nano/Uno. A popular DIY ASCOM focuser with more than 121,000+ downloads. (c) Copyright Robert Brown 2014-2024. All Rights reserved. Permission is granted for personal and Academic use only. Spreadsheet to calculate what stepper motor to use. https://sourceforge.net/projects/arduinoascomfocuserpro2diy/files/Documentation/Nema-Stepper-Motors.xlsx/download

...Test firmware was developed that uses this function set to explore and demonstrate the many capabilities of the panel. The STM library is used along with FreeRTOS. Please see: LcdTest_ReadMe.pdf or LcdTest_ReadMe.odt. The project is simply a personal record of what has been done, and will not be developed further.

This is a small library that allows comunicating with a Webasto (tm) W-Bus capable car heating system. Runs on Personal Computers or for embedded devices (slim design). Easily portable. Includes a Heater manager, heater controller program and more. The GIT repository (CVS is deprecated) also includes a control unit application to control W-Bus capable devices, a W-Bus compatible heater unit firmware application and a heater simulator for testing purposes.

JNode is a Java New Operating system Design Effort. JNode is a simple to use and install Java operating system for personal use on modern devices. Any java application runs on it, fast and safe. See our homepage for additional information.

IEEE 802.15.4 networkong stack covers PHY and MAC layers (PHY layer implemented in hardware and MAC optionally implemented in software). Also 6lowpan (IPv6 packet encapsulation) is implemented for use by IEEE 802.15.4 and BT LE networks. Note: due to licensing restrictions (and despite project's name) we do not plan to implement any ZigBee related stack parts.

ServoMaster is a project dedicated to providing a consistent hardware independent way of controlling the R/C servos with the personal computer.

LibSeris is a set of common code for controlling the Seris class of inexpensive personal robots, also created by this project.

Drivers and utility set for 802.15.4 standard low-rate wireless personal area networking

BlueNIC implements the Bluetooth Personal Area Network Profile with all roles as PANU,GN and NAP. The software is written as a loadable module for the linux kernel and required the BlueZ Bluetooth core stack.