Search Results for "parallel port control"

Betaflight is flight controller software (firmware) used to fly multi-rotor craft and fixed wing craft. This fork differs from Baseflight and Cleanflight in that it focuses on flight performance, leading-edge feature additions, and wide target support. Betaflight supports a wide range of flight controllers with at least an STM32F4 MCU. You can use nearly any piece of modern hardware out there. Full telemetry and high refresh rate for receivers, camera and VTX control, RGB LEDs, and much...

...There are multiple competing libraries, FastLED being the biggest and Adafruit NeoPixel being the most common for beginners. On ESP32, both FastLED and NeoPixelBus can provide more than one channel/bus. FastLED primarily uses RMT to support 8 parallel channels. NeoPixelBus now supports the RMTs 8 channels and two more channels using i2s.

...For the latest source, releases, bug tracking, use https://github.com/OpenCBM/OpenCBM instead! Win NT/2K/XP/7/8/10/11, Linux/i386/AMD64/ARM, FreeBSD and MacOS X kernel driver and development library to control serial CBM devices, such as the Commodore 1541 disk drive, connected to the PC's parallel port via a XM1541 or XA1541 cable. Fast disk copier included. Successor of cbm4linux. Also supports the XU1541 and the XUM1541 USB devices (a.k.a. "ZoomFloppy").

The Monsputer is a Z80 computer developped with old chips (and some new) collected over the years. It has about 2M memory, clocks at 4.0MHz, has serial ports, 1 parallel port, 1 CAN bus, 2 SPI, 1 I2C, a RTC and other features. It supports interrupts mode 2 but not DMA.

...xSmbus-xx, xBridge-xx do not need to install the driver according to the operating system in advance, nor select the COM port requirement, as long as they are in the Java environment, they can be plug and play. You can buy the product from: - China, https://shop255163877.taobao.com - Taiwan, you can buy on https://www.ruten.com.tw/user/index00.php?s=doidx

WxPic allows, with a PC and an adapter (programmer), to program a PIC micro-controller, by loading a HEX file, reviewing and/or editing the configuration or memory and writing and/or verifying the device flash memory.

DIY Arduino Boards PCF8674 MCP23017 74HC595 CD4021 I2C Parallel IO Piezo buzzers See the Files section for a wide range of sensors and sample code Schematics PCB Layout Sample Code

...Runs on Personal Computers or for embedded devices (slim design). Easily portable. Includes a Heater manager, heater controller program and more. The GIT repository (CVS is deprecated) also includes a control unit application to control W-Bus capable devices, a W-Bus compatible heater unit firmware application and a heater simulator for testing purposes. Also, a serial port loop back driver for linux is included to simulate OBD II K-Line adapters.

Designed for data-logging applications (weather, hydroponics, greenhouses, aquariums, home automation, power consumpion, solar or wind generators etc.), this solution can be useful also in alarms and burglar. Now you can develop MySQL and web enabled Arduino applications only working on Arduino and PHP. To keep ligth the Arduino Sketch, you can port all not realtime logic to PHP side. At the end your application will works on XQ+Arduino UNO even 24/7 with only 20 Watt AC power, and can...

Firmware for small µController board with 4x PT1000 temperature channels which control the temperature in one room via two fan units. PIC18F4455 based hardware. Can be used to control temperature in the basement or guest house, within a computer case, etc.

Drivers and applications for the range of Scientific CCD cameras produced by Apogee Instruments Inc. Both ISA and Parallel interfaces are supported. A high level library and GUI are provided for Astronomical applications.

This project provide a reconfigurable asynchronous SDM router which can be configured into a basic wormhole router or an SDM router with multiple virtual circuits in every direction. Features: * 5-port router for mesh network (0 south, 1 west, 2 north, 3 east, 4 local) * The dimension order routing (XY routing) * Available flow control methods: wormhole, SDM, VC * Reconfigurable number of virtual circuits, buffer size, data width * Fully synthesizable router implementation * SystemC testbench provided Languages: * Routers are written in synthesizable SystemVerilog * Test benches are provided by SystemC Software requirements: * The open source Nangate 45nm cell library * Synopsys Design Compiler (Synthesis) * Cadence IUS -- NC Simulator (for SystemC/Verilog co-simulation)

A collection of libraries and tools to use graphical LC displays connected to the PC's parallel port.

libieee1284 is a cross-platform library for parallel port access.

This C++ and Qt based project provides an easy way to control the step motor boards PAO-3M and SMK-4M-4A from Grummes Elektronik GmbH from within your own application. Interfacing is done using the LPT parallel port.

Software for controlling vending machines. Allows users to preload credits to their user accounts and use them to buy various goods from one or more vending machines connected to computer via parallel port relay interface.

hardware log monitor that will display log behaviour via various hardware (parallel port, USB devices, ...). You can specify pattern(regexp) in log(s) on which hardware will turn on. It has also some unique ways of visualization of log files.

The libtlc54x helps you to communicate with the Texas Instruments TLC548/549 A/D-Converter via serial or parallel port. With the library you need only three steps to open the device, read the data and close the device.

Parapin makes it easy to write code under Linux that controls individual pins on a PC parallel port. This kind of control is very useful for electronics projects that use the parallel port as a generic digital I/O interface (instead of as a printer port)

An OpenSource software (ApaciLinux) that allows to run a PHP Server to control a device connected through the serial port

Uma API de C++ multi-plataforma que fornece fácil acesso à porta paralela. Com ela o desenvolvedor não se preocupa com inversões de bits e como o sistema lida com a porta. English: A C++ API for using the PC parallel port written in BR Portuguese

This is an easy to use library for interfacing with the parallel port from Java.

Input/output (IO) C library exposing a common API for real mode and permission-restricted access to parallel port under Windows, Linux and MS-DOS operative systems. It also allows pin-by-pin port access.

Cylon is a project to send various patterns to a simple LED display connected to the parallel port of a standard PC. The low-level drivers currently support Linux, but I have ported it to FreeBSD and Cygwin.

Currently-under-development library of OS-independent objects to provide complex parallel port control, high-resolution timers and other similar facilities needed when using PC I/O ports to control external digital electronics.