Search Results for "minecraft full version"
Sort By:
Showing 29 open source projects for "minecraft full version"
View related business solutions-
Go From AI Idea to AI App FastAccess Gemini 3 and 200+ models. Build chatbots, agents, or custom models with built-in monitoring and scaling.
-
Application Monitoring That Won't Slow Your App DownFull APM with errors, performance, logs, and uptime monitoring. 99.999% uptime SLA on the platform itself.
-
1
NanoKVM
Affordable, Multifunctional, Nano RISC-V IP-KVM
...The Lichee NanoKVM is available in two versions: NanoKVM Lite is a basic configuration that is suitable for individual users with certain DIY capabilities and enterprise users with bulk requirements. The NanoKVM Full is a full version with a sophisticated case and complete accessories, as well as a built-in system mirror card that is ready to use at boot, and is recommended for individual users. -
2
Betaflight
Open Source Flight Controller Firmware
Betaflight is flight controller software (firmware) used to fly multi-rotor craft and fixed wing craft. This fork differs from Baseflight and Cleanflight in that it focuses on flight performance, leading-edge feature additions, and wide target support. Betaflight supports a wide range of flight controllers with at least an STM32F4 MCU. You can use nearly any piece of modern hardware out there. Full telemetry and high refresh rate for receivers, camera and VTX control, RGB LEDs, and much... -
3
RF24
OSI Layer 2 driver for nRF24L01 on Arduino & Raspberry Pi/Linux
Optimized high-speed driver for nRF24L01(+) 2.4GHz wireless transceiver. More compliant with the manufacturer specified operation of the chip, while allowing advanced users to work outside the recommended operation. Utilize the capabilities of the radio to their full potential via Arduino. More reliable, responsive, bug-free and feature-rich. Easy for beginners to use, with well-documented examples and features. Consumed with a public interface that's similar to other Arduino standard... -
4
GuitarPedal
Linus learns analog circuits
GuitarPedal is an experimental repository exploring a digital guitar-effects signal chain implemented with lean, low-level code. The project demonstrates how to read audio input, process it through simple transformations, and write the result out in real time with minimal latency. It emphasizes straightforward, inspectable DSP so developers can follow the math and tweak parameters without a giant framework in the way. The codebase favors portability and simplicity, focusing on a handful of... -
Forever Free Full-Stack Observability | Grafana CloudBuilt on open standards like Prometheus and OpenTelemetry, Grafana Cloud includes Kubernetes Monitoring, Application Observability, Incident Response, plus the AI-powered Grafana Assistant. Get started with our generous free tier today.
-
5
Arduino ASCOM Focuser Pro2 DIY
Version 2 of the myFocuser Project
myFocuserPro2 (myFP2) is an ASCOM - INDI - LINUX - WINDOWS telescope focuser with a large range of options. 315,606+ file downloads. The most popular focuser project. (c) Copyright Robert Brown 2014-2026. All Rights Reserved. Code or portions of code may not be copied or used without written permission from the author. Other Focuser Projects myFP2ESP32 WiFi - https://sourceforge.net/projects/myfocuserpro2-esp32/ [ESP32 Only] myFP2ESP8266 WiFi - ... -
6
OpenOCD - Open On-Chip Debugger
The Open On-Chip Debugger
The "Open On-Chip Debugger" provides JTAG/SWD access from GDB (or directly with TCL scripts) to processors with ARM and MIPS based cores. See website for full list of supported targets. -
7
G-USB-Formatter
Advanced USB Memory Device Format Tool
With advanced settings and multiple format options, it allows you to format devices connected via USB. My Github: https://github.com/shampuan/G-USB-Formatter This program is a lightweight tool that allows you to format your USB storage devices using more features on Debian-based systems. -
8
JxMake
A Java-based cross-platform build system.
...In addition, JxMake provides several capabilities not typically found in other console-based build systems, including a built-in lightweight GUI, serial console, serial plotter, multi-MCU in-system programmer, and more. Currently, JxMake's loadable libraries (build scripts) are primarily designed for non-OS MCU systems and experimental use. Full support for building desktop applications is planned for future development. Building JxMake requires Java SDK 8 or later (note that Java SDK 8 is a Long-Term Support version). -
9
Zabbix-HDD
Zabbix extension that reports various HDD status using various tools
This extension uses not only smartctl (smartmontools) but other available tools to determine the existance of an HDD and as much as possible of its status. As a Zabbix "auto-discovery" process, these results can reflect changes in available HDD in near-to-real-time. -
Our Free Plans just got better! | Auth0You asked, we delivered! Auth0 is excited to expand our Free and Paid plans to include more options so you can focus on building, deploying, and scaling applications without having to worry about your security. Auth0 now, thank yourself later.
-
10
IIDC Camera Control Library
Capture and control API for IIDC compliant cameras
libdc1394 is a library that provides a high level programming interface for application developers who wish to control and capture streams from IEEE 1394 based cameras that conform to the 1394-based Digital Camera Specifications (also known as the IIDC or DCAM Specifications). libdc1394 also supports some USB cameras that are IIDC compliant. Besides capture and control, libdc1394 provides a full set of colour space conversion functions (including RAW decoding), vendor specific functions... -
11
HelloWord-Smart Keyboard
High-end modular keyboard platform with deep customizability
HelloWord-Keyboard is a high-end modular keyboard platform where both the hardware and firmware are designed from scratch to provide deep customizability and advanced features. The project comprises a main keyboard PCB (STM32F103), a dynamic module (STM32F405) with additional features like an e-ink screen, OLED display and a haptic/motorized knob, a base/dock module with USB hub functionality, and other supporting PCBs. The firmware includes high-speed scanning of keystrokes, RGB lighting... -
12
USBphpTunnel
Android app for MXQ TVbox to control an Arduino board via USB from PHP
Designed for data-logging applications (weather, hydroponics, greenhouses, aquariums, home automation, power consumpion, solar or wind generators etc.), this solution can be useful also in alarms and burglar. Now you can develop MySQL and web enabled Arduino applications only working on Arduino and PHP. To keep ligth the Arduino Sketch, you can port all not realtime logic to PHP side. At the end your application will works on XQ+Arduino UNO even 24/7 with only 20 Watt AC power, and can... -
13
Gentoo CNC
Solution for changing your device into full-feature CNC controller
GentooCNC is a Gentoo based Linux didtribution designed to support hard real-time control of equipment such as industrial machine tools, 3D printers, laser cutters, robots, and coordinate measuring machines using LinuxCNC. GentooCNC is designed to target embedded platforms such as the BeagleBone, Mini2440, as well as conventional desktop platforms. -
14
The USB/IP Project aims to develop a general USB device sharing system over IP network. To share USB devices between computers with their full functionality, USB/IP encapsulates USB I/O requests into IP packets and transmits them between computers.
-
15
This is a C# library dedicated for using with a www.canusb.com device Full notes: See ReadMe.txt Summary The LAWICEL DLL is 'unmanaged code' and was not designed for use by C#/VB/Mono http://en.wikipedia.org/wiki/Managed_code If you wish to call 'unmanaged code' from 'managed code', you need to use a 'C# wrapper' to access the DLL. This wrapper uses 'PInvoke' (like peek/poke) to 'martial' calls from managed to unmanaged code. It sounds complicated, and it is. IT IS ALSO TOTALLY...
-
16
G-CNC Sender
GCode sender for ramps and marlin firmware for CNC Milling Machine
GCode sender for ramps and marlin firmware for CNC Milling Machine 3D preview RS232 and RS232 over TCP drivers Full GComands control, disable, replace, pause. Full machine control Remap XYZ coordinates GComands description After install select Help->Check for updates.. -
17
jCircuits
An easy-to-use Simulation of Hardware-Gates
A very easy-to-use but complex Gate-Simulation.You can simulate various gatters like AND, NAND, OR, NOR, NOT, XOR. And also build Flip-Flops, Full Adders and other compley structures. In other words its a register-Transfer Simulation of Hardware-Processes. There are also 2 Applet-Versions - the full Version and a only-Display-Version ---------- USEFUL TIPS: ---------- Always enter the Edit-Mode (swiss knife) bevor editing something ;) [!! IMPORTANT !!] ... -
18
jTomtom is et Java GPS updater. With jTomtom you can update the QuickFix et Radar POI in your Tomtom GPS
-
19
airboard-ir has been rehosted at github -- please visit https://github.com/foxharp/avrlirc -- thanks! -pgf airboard-ir replaces the IR receiver supplied with a LiteOn SK-7100 Airboard cordless keyboard with an LIRC-compatible receiver. Keyboard/mouse reports are translated to /dev/input events. Full remapping of keyboard and button functions is easy.
-
20
CUPS drivers and software for Panasonic KP-X series dot-matrix printers. The goal is to minimize use of 3rd party filters while allowing full control of graphical printing and replicating the original control software functions on Unix-like OS's.
-
21
Full functional PS/2 keyboard on Atmega16, works with simple circuits, and fully customizable. Performs really great! - ps2 / keyboard / ps2avr / controller / avr / hardware
-
22
The primary aim of this project is to develop a full featured Microblaze simulator . The project is develloped only in C , then it can be easely ported.
-
23
Userspace Driver and application to control DMX-512 devices through Velleman's K8062 kit under Linux. This is only a proof of concept, I never found the time to go further (a full kernel driver using either a block device or a /proc file)
-
24
Linux based client software and a set of AVR microcontroller devices that support the SportIdent electronic punching system used in orienteering. Clients send card data to a PHP/SQL web application, that serves as full featured event software.
-
25
Expandy allows full control of the Gnome desktop environment through a single button interface. This gives people with physical disabilities access to a computing environment by emulating keyboard and mouse events using a button and on-screen feedback.
