Search Results for "local"

Alternative firmware for ESP8266 with easy configuration using webUI, OTA updates, automation using timers or rules, expandability and entirely local control over MQTT, HTTP, Serial or KNX. Unless your Tasmota powered device exhibits a problem or you need to make use of a feature that is not available in the Tasmota version currently installed on your device, leave your device alone - it works so don't make unnecessary changes! If the release version (i.e., the master branch) exhibits unexpected behaviour for your device and configuration, you should upgrade to the latest development version instead to see if your problem is resolved as some bugs in previous releases or development builds may already have been resolved. ...

...Easily copy and paste between computers with no effort at all. Keep your passwords and sensitive data secure with TLS encryption. Key, mouse and data all sent fast and securely, directly over your local network. Advanced customization settings give you complete control of your setup. The next version is being built from the ground up by combining the latest technologies, Node.js and React, with the rock-solid stability of C++.

WLan Driver 802.11n Rel. 4.80.28.7.zip is a compressed file containing drivers for a wireless network adapter that supports the 802.11n Wi-Fi standard. These drivers enable your computer to communicate with and control the Wi-Fi hardware, allowing it to connect to wireless networks. To install it, you would unzip the file and run the installer or manually update the driver through your system’s device manager. The WLan Driver 802.11n Rel. 4.80.28.7.zip is typically for wireless network...

...GROWSS also controls the exhaust fan and grow lights based on the time interval (ie. 12 hours on/12 hours off) & from environmental factors, temp & humidity. The environmental values are saved to the local storage every 15 minutes and when an alarm is present. Hi & low values are also saved. The LEDs on the case & the mobile application indicate if there is a high/low temp alarm, hi/low humidity alarm, soil moisture alarm, or smoke alarm. A speaker (buzzer) is activated on the case if there is a smoke alarm. 2 other LEDs indicate if either the exhaust fan is on or if the humidifier is on.

###### HDDtempNC has now moved to Github ###### ###### Please visit the Github project at https://github.com/viharm/HDDtempNC ###### HDDtempNC provides a script to acquire hard disk drive temperature for a target host by querying an existing HDDtemp daemon and then parse the results according to the request. See project wiki for more details, usage and code.

wl500g is ASUS Oleg's based custom firmware. It is free with custom firmware features, and supports the following branches and models: 1.9.2.7-rtn (mainstream, 2.6.22 kernel based, supports: > ASUS RT-N16, RT-N15U, RT-N12, RT-N12B1, RT-N10, RT-N10U, RT-N10UB1, WL-500gP, WL-500gPv2, WL-500W); 1.9.2.7-d (stable/suspended, 2.4.37 kernel based, supports: > ASUS WL-500gP, WL-500gPv2, WL-500W, WL-500gX, WL-520gU, WL-550gE, WL-330gE, WL-320gE, WL-320gP).

Free recovery, partitioning, benchmarking, erasing solution. Clone of Parted Magic. Contains all tools from PM and much more. Based on Ubuntu with LXDE WM and working apt system. Everything UNDER 700mb.

This project provide a reconfigurable asynchronous SDM router which can be configured into a basic wormhole router or an SDM router with multiple virtual circuits in every direction. Features: * 5-port router for mesh network (0 south, 1 west, 2 north, 3 east, 4 local) * The dimension order routing (XY routing) * Available flow control methods: wormhole, SDM, VC * Reconfigurable number of virtual circuits, buffer size, data width * Fully synthesizable router implementation * SystemC testbench provided Languages: * Routers are written in synthesizable SystemVerilog * Test benches are provided by SystemC Software requirements: * The open source Nangate 45nm cell library * Synopsys Design Compiler (Synthesis) * Cadence IUS -- NC Simulator (for SystemC/Verilog co-simulation)

This project aims to provide a fully functional GUI [and command line] interface to control the "USB LED Message Board v1.0" HW, by dreamcheeky. It allows local and remote multi-user control.

Get and display the traffic counter of a Fritz!Box 7270 (or similar) in a human readable form on local host. The telnet daemon has to be enabled on the FritzBox to download the data file from the AVM router to local host.

Russian Technology Kit GNU/linux - the distribution kit for audit of safety in local networks of any class. Can be used for simplification of procedure of diagnostics and repair of hardware maintenance. Is truly free product.

OS independent RS232 remote control. Java-based server (console), easy adjustable HTML GUI, local/internet use, incl. device driver API and drivers (e.g. EIKI LC-XM1/SM1/VM1!!)