Search Results for "ii"

...The GIT repository (CVS is deprecated) also includes a control unit application to control W-Bus capable devices, a W-Bus compatible heater unit firmware application and a heater simulator for testing purposes. Also, a serial port loop back driver for linux is included to simulate OBD II K-Line adapters.

Ardurail is an Arduino library for generating a TTL signal with an Arduino for serving model railroad equipment (locomotives, switches, feedback-detectors) based on the Motorola II protocol.

We provide MATLAB and Verilog Models of GeAr, and previously proposed adders (ACA-I, ETAII, ACA-II and GDA) at http://sourceforge.net/projects/approxadderlib/ GeAr is a low latency Generic Accuracy Configurable Adder that provides a higher number of potential configurations compared to state-of-the-art approximate adders, thus enabling a high degree of flexibility and trade-off between performance and output quality. These MATALB and Verilog models can allow software programmer as well as hardware designers to evaluate their code and design. ...

This project is aimed to add the ADMtek compatible USB-Ethernet converter support to the ARM systems, including Android. The patch provided is intended for http://pegasus2.sourceforge.net/ Pegasus/Pegasus II USB Ethernet Linux driver. It allows the driver successfully run on ARM making it send the correctly aligned requests for DMA. Tested on Android 4.2.2 (Linux 3.0.36) with DesignWare USB 2.0 OTG Controller (DWC_OTG). Supported USB to Ethernet adapters: 3Com, AboCom (10/100 and HPNA), Accton/SMC (some models), ADMtek, AEI, Allied Telesyn, ATEN, Belkin (some models), Billionton, Corega FEther, D-Link (some models), EasiDock, ELECOM, Elsa Micolink, Gigabyte GN-BR402W Wireless Router, GOLDPFEIL, Hawking, Hewlett-Packard HN210C, IO DATA, Compaq iPAQ Networking, Kingston KNU101TX Ethernet, LANEED, Linksys, MELCO/BUFFALO, Microsoft MN-110, NETGEAR FA101, OCT, Philips USB 10/100 Ethernet, smartNIC 2 PnP Adapter, SOHOware NUB100/NUB110 Ethernet, SpeedStream USB 10/100 Ethernet

OpenSOC86 is an open implementation of the x86 architecture in Verilog. The current version only implements the 16-bit part (real mode). The processor is a pipelined architecture clocked at 100 MHz in a Cyclone II speed grade -6. Therefore it can be seen as similar to a 486 in real mode. Several peripherals are also implemented in a somewhat minimalistic way, but enough to be able to boot an IBM PCXT compatible bios and MSDOS 6.22. The current implementation is only proven to boot the bios and DOS in simulation. The system is targeted to run on the DE2-70 board. ...

Procbench is a CPU benchmark that tests math capabilities of your processor Ii will measure the performance of your CPU, FPU and the Cache/Memory subsystem. It is multiplatform (Windows, Linux, Bootable, DOS...)

Immersion Cooker Mk II: A food-oriented, feature-rich water-bath controller for slow cooking sous vide. Cook just about anything to perfection with open source hardware and software.

UbuDSL is a tool that helps users to configure their ADSL modem and connection under Ubuntu (and most of Ubuntu-based) distributions. It supports USB ADSL modems working under the following drivers: ueagle-atm, speedtch, cxacru, unicorn II.

The Linwizard project aims to port the Linux Kernel, all necessary drivers and (if possible) the OPIE/GPE Framework to the WM 2005 based PocketPC Phone HTC Wizard. The HTC Wizard is identical to Phones sold as XDA mini S, VPA II Compact or MDA Vario

Very fast and easy-to-use linux driver for the Tundra Universe II PCI to VME bridge including C++ interface class, example programs and documentation.

USB drivers for PowerQUICCII

Linux kernel porting for NEC Mobile Gear II MCR7x0(MCR700 and MCR730 in JAPAN) and NEC MobilePro 8x0(800 and 880 in USA).

This library allows you to control a PMS (Particle Measuring Systems) Lasair II air particles counter. You can either use a COM component from several programming languages (Visual Basic, ...) or directly use its underlying Python class.

A Linux interface for the Dacal CD Library II, using a USB C-program and command-line interface.

geniusvp2 is a SANE (http://www.sane-project.org/) backend for the GeniusŽ ColorPage-Vivid Pro II flatbed scanner. Currently, only the parallel port version is supported.

This is a linux driver for the Matrox Meteor-II Multi-channel framegrabber. This is an alternative driver to the offical version which is available from http://www.emlix.com/index.php?id=158. Be warned that this is a developers-only version.

Free EZ Tool is a command line application that enables EZ-Flash Powerstar II owners to use their purchase under Linux.

linremoted is an easy to use deamon for the ATI Remote Wonder II. You can easily configure all buttons of every aux-level.

The JBlaster is a software driver that allows you to configure Altera's PLDs and FPGAs through the ByteBlasterMV in JTAG mode under Linux and Windows NT, interfaceing via the parallel Port. The JBlaster parses a Quartus II generated chain descriptio

A ZigBee library for ZigBee Series I-II, this library keep a list of end device, their status, IO values, configurations, etc... the idea is keep updated all, all the time.