Search Results for "host"

dfu-util is a host side implementation of the DFU 1.0 and DFU 1.1 specifications of the USB forum. DFU is intended to download and upload firmware to/from devices connected over USB.

This project delivers Linux support (USB driver and Tools) for a Digital Signal Processor (DSP) cards of the Signal Ranger series, see http://www.softdb.com/product_dsp.shtml for details) connected to a Linux host via USB.

...This project is something I wanted to do for a while to make cheap and light weight custom rc chips, and I decided to make it a real project when I found a wooden single use spoon which I wanted to turn into a boat. this project will host multiple version, some very simple ones, and some more complex. a similar thing can be said for the controllers, I will soon upload the schematics and designs for a steampunk style controller. but for a more simple understanding a simple remote might be a transmitter(led, speaker, or antenna for example) a button, and a capacitor to stabilize the button because every pulse you send changes the state. however high precission control is possible. ...

Drivers for the HP (previously Compaq) Smart Array controllers which provide hardware RAID capability. Hardware info: https://www.hpe.com/us/en/product-catalog/servers/smart-array-controllers-and-smart-host-bus-adapters.hits-12.html

Industry Pack support for Linux kernel. Project to host carrier and IP modules device drivers for Linux kernel.

###### HDDtempNC has now moved to Github ###### ###### Please visit the Github project at https://github.com/viharm/HDDtempNC ###### HDDtempNC provides a script to acquire hard disk drive temperature for a target host by querying an existing HDDtemp daemon and then parse the results according to the request. See project wiki for more details, usage and code.

GQGMC is a user level driver for interfacing a Linux host to GQ Electronic's GMC-300 geiger-muller counter. Written in C++, the driver provides an interface method for each of the capabilities of the GMC-300. A sample command line text only program and sample Qt based GUI program are provided.

...You can program *any* USB keyboard function (with or without Control, Alt, Shift and GUI modifiers) to a button on your infrared remote control and when you press that button IRK! will send the corresponding USB keystroke to the host computer. You can program *any* USB Consumer Device control code too...for example, Play, Pause, Mute, Volume up, Volume down, and many others.

tbb is a simple command line interface for FT232R and FT245R Bit Bang Mode. Since version 0.02, I2C host emulation command tbbi2c added. And since version 0.05, you can build the binaries for mac, linux and windows (experimental).

ztex is a Firmware Kit with a corresponding Driver API for EZ-USB based hardware. The Firmware is written in C and assembled using a powerful macro processor. The Driver API allows the development of platform-independent device drivers.

Firmware for small µController board with 4x PT1000 temperature channels which control the temperature in one room via two fan units. PIC18F4455 based hardware. Can be used to control temperature in the basement or guest house, within a computer case, etc.

USB 2.0 for Real-Time provide a hard real-time capable implementation of an USB 2.0 stack on top of Linux/Xenomai. It implements the stack core and EHCI, UHCI and OHCI host controller drivers.

isp1760-hcd project will provides Linux Host Controller driver for the ISP1760 and ISP1761 based on USB High Speed ISP1760/1 Host Controller PCI kit. This driver provides BULK, INTERRUPT and ISOCHRONOUS transfer support.

Multiplatform and Multiprotocol driver for QLogic Host Bus Adapters. Runs on Solaris, NetBSD, FreeBSD and Linux. Support both initiator and target mode. Supports QLogic 1020 SCSI through Qlogic 25XX FC cards.

Get and display the traffic counter of a Fritz!Box 7270 (or similar) in a human readable form on local host. The telnet daemon has to be enabled on the FritzBox to download the data file from the AVM router to local host.

TMS320DM642 Host-side PCI Driver

The Host Bus Adapter API (Applications Programming Interface) is a C-level project to manage Fibre Channel Host Bus Adapters.

Assembler and download/monitor for the new Rabbit 2000 (TM) microprocessor developed by Rabbit Semiconductor and Z-World. Allows use of Linux as host development platform.

HBAVERIFY project is developing a C-based application for testing the Fibre Channel Host Bus Adapter (HBA) API, developed through the Storage Networking Industry Association (www.snia.org).

This project is developing a Java based CIM provider for Fibre Channel Host Bus Adapters (HBAs). It uses the common HBA API developed by the Storage Nerwork Industry Association (SNIA), available at: http://www.snia.org This project will conform to pro

Device drivers for Fusion MPT compatible host adapters produced by LSI Logic.

PCEmu is a software-only PC emulator. It emulates an 8086-based machine with VGA text graphics, EMS memory, host file system access, and `hardware' debugging. It runs DOS and most programs correctly.

Linux Device Driver for Non Volatile Memory Host Controller Interface