Search Results for "g-cvsnt"

WLan Driver 802.11n Rel. 4.80.28.7.zip is a compressed file containing drivers for a wireless network adapter that supports the 802.11n Wi-Fi standard. These drivers enable your computer to communicate with and control the Wi-Fi hardware, allowing it to connect to wireless networks. To install it, you would unzip the file and run the installer or manually update the driver through your system’s device manager. The WLan Driver 802.11n Rel. 4.80.28.7.zip is typically for wireless network...

GCode sender for ramps and marlin firmware for CNC Milling Machine 3D preview RS232 and RS232 over TCP drivers Full GComands control, disable, replace, pause. Full machine control Remap XYZ coordinates GComands description After install select Help->Check for updates..

.... In order to not damage your machine, Oh My Fan! does not let you set a minimum/maximum speed to a value below/above Apple's defaults. If you encounter any issue, you can email me: Tong-G@outlook.com. If you are using GnuPG, you can send me encrypt email, my GnuPG pub key is sosueme@openmailbox.org, you can retrieve it from keyserver.

Linux driver for the ZyDAS ZD1211(b) 802.11a/b/g USB WLAN chip. There is the community zd1211 driver (based on the ZyDAS GPL driver) and the rewritten zd1211rw driver (included in Linux 2.6.18-rc1 and newer).

Open Source Linux driver for wireless network cards (DWL-[G]520+ PCI, DWL-[G]650+ CardBus, GL-2422MP mini-PCI, DWL-120+ USB etc.) which use the entirely undocumented Texas Instruments (TI) ACX100/ACX111 chips, for 2.4.x , 2.6.x to 3.x kernels. FreeBSD: see some other website (FIXME URL got clipped). !! BIG FAT NOTE: development (i.e., driver "releases") is happening in git source repository tree (as of 2011-09-04), thus you're expected to look there (see web site menu Code --> Git) !!

Linux Driver and control program for the Antec H20 - 920 Series liquid coolers.

...++. * Optimise some code for better reading or performance. INSTALL GUIDE Make sure you have GNU Make, gcc-g++, and boost library installed. Use make to make the project. The execute is named "vpreproc" in current directory. Using vpreproc --help for usage information. Any question or request pls write to <wsong83@gmail.com>

The OCCN project enhances SystemC2.0+ modeling by developing C++ classes for modeling user-defined or system-specific, point-to-point or multiaccess inter-module communication channels (or future network-on-chip) at various abstraction levels. To reference this work: M. Coppola, S. Curaba, M.D. Grammatikakis, R. Locatelli, G. Maruccia, and F. Papariello, "OCCN: a NoC modeling framework for design exploration", Design Automation in Europe Conf. (DATE), 2004, pp. 174--179. Available from...

** Note: This projected has been halted. Please join #lg4l @ irc.freenode.net for more info.** A system of libraries and utilities to operate the Logitech G19 Gaming keyboard in linux and related operating systems.

CPU-G is an application that shows useful information about your hardware. It collects and displays information about your CPU, RAM, Motherboard, some general information about your system and more.

Dedicated at collecting information about using the Marvel G200-TV and the Rainbow Runner G-series in Linux, including (but not restricted on) the development of a driver for the mentioned hardware. We try to support the Marvel G400 too.

This project contains the material discussed in my PhD dissertation, entitled "Hardware/Software Design of Dynamic Real-Time Schedulers for Embedded Multiprocessor Systems." The source code is available in the SVN repository: https://sourceforge.net/p/xrt/code/6/tree/trunk/ and consists in two folders: 1) /X-RT : A portable multiprocessor scheduling framework supporting scheduling periodic real-time tasks according to the G-EDF (Global Earliest Deadline First) scheduling platform...